The Full Wiki

More info on Airbus Beluga

Airbus Beluga: Map

Advertisements
  
  

Wikipedia article:

Map showing all locations mentioned on Wikipedia article:



The Airbus A300-600ST (Super Transporter) or Beluga' is a version of the standard A300-600 wide-body airliner modified to carry aircraft parts and over-sized or awkward cargo. It was officially called the Super Transporter at first, but the name Beluga became popular and has now been officially adopted.

History

Several major aircraft manufacturers are multinational, and it is not unusual for them to have plants in widely separated locations. Airbus, however, is unique in that it was a consortium formed by the major French, British, German, and Spanish aerospace companies, and the geographic location of Airbus manufacturing is not merely a matter of cost and convenience, it is also a matter of history, national interest and pride. In consequence, each of the Airbus partners makes an entire aircraft section, which needs to be transported to a central location for final assembly. The details vary from one model to another, but the general arrangement is for the wings and landing gear to be made in the UK, the tail and doors in Spain, the fuselage in Germany, and the nose and center-section in France; all being assembled in either Toulousemarker, France or Hamburgmarker, Germany.

Background

Airbus started in 1970, the first few components were delivered by road, but growing production soon necessitated a switch to air transport. From 1972 onwards, a fleet of four highly modified "Super Guppies" took over. These were former Boeing Stratocruisers from the 1940s, converted with custom fuselages and turbine engines to carry large volume loads for the 1960s NASAmarker space program, leading to the jibe that 'every Airbus is delivered on the wings of a Boeing'. As time went by, the Super Guppies grew increasingly unsatisfactory for Airbus's ferrying needs: their age meant that operating expenses were high and ever-increasing, and growing Airbus production required greater capacity.

Design phase

Airbus Beluga in flight
In 1991 Aérospatiale and DASA, two of the major Airbus partners, formed a company to develop a replacement. The starting point was the design for the wide-body twin-engined Airbus A300: the wings, engines, landing gear, and the lower part of the fuselage are the same as the A300 while the upper part of the fuselage is an enormous horseshoe-shaped structure in diameter. To provide access to the cargo area from the front without having to disconnect all electrical, hydraulic and flight control connections (not to mention the lengthy recalibrations before each flight the reconnection entailed), the standard A300 cockpit was moved down below the cargo floor level, and the tail structure was enlarged and strengthened to maintain directional stability.

Production and entry into service

Airbus Beluga in old colours with other planes in the background giving an idea of its massive scale
Construction began in September 1992, and the first flight took place in September 1994. After 335 hours of test flying, certification was awarded in October 1995, and the A300-600ST "Beluga" entered service. Four more Belugas were constructed, at a rate of roughly one per year, and all five remain in regular service. Their primary task is to carry Airbus components ready for final assembly across Europe to Toulouse or Hamburg, but they are also available for charter work, and have been used to carry a variety of special loads, including space station components, large, very delicate artwork, industrial machinery, and entire helicopters. (One Beluga was chartered to carry two complete NHI NH90s and a Eurocopter Tiger from Europe to Australia and back). The A300-600ST's freight compartment is in diameter and long; maximum payload is 47 tonnes. At 155 tonnes its maximum take-off weight is comparable to a normal A300, showing that the Beluga was intended for large but relatively light cargo.

The main deck cargo volume of the Beluga is greater than that of the C-5 Galaxy or the Antonov An-124. However it is restricted by cargo weight capacity of 47 tonnes, compared to 122.5 tonnes for the C-5 Galaxy and 150 tonnes for the An-124. Despite this width, the Beluga cannot carry most fuselage parts of the A380, which have to be brought by ship and road usually, despite this the Beluga has been used to transport some components on occasion.

In 1999 it carried a very unusual load, a large painting Liberty Leading the People by Eugène Delacroix which has hung in the Louvremarker in Parismarker since 1874. It flew from Roissy airport in France to Tokyo via Bahrain and Calcutta in about twenty hours. The large canvas measuring 2.99 meters high by 3.62 meters long was too large to fit into a Boeing 747. It was transported in the vertical position inside a special pressurized container provided with isothermal protection and an anti-vibration device.

Specifications

Airbus Beluga loading/unloading
Measurement A300-600ST
Length 56.15 m (184 ft. 3 in)
Span 44.84 m (147 ft. 2 in)
Height 17.24 m (56 ft. 7 in)
Wing area 122.40 m² (1,317 ft²)
Fuselage diameter 3.95 m (13 ft)

7.1 m (23 ft 4 in)in cargo compartment
Weight empty 86 t
Maximum take-off weight 155 t
Range (40 ton payload)   2,779 km (1500 nm)
Range (26 ton payload)   4,632 km (2500 nm)
Engines   GE CF6-80C2A8
Cargo capacity   47 t
Cargo volume   1,210 m³
Cockpit Crew Two


See also

References

  1. EASA, Type-certificate data sheet, Airbus A300-600ST
  2. Introduction and overview of the Beluga Family


External links




Embed code:
Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message