The Full Wiki

More info on Churchill tank

Churchill tank: Map


Wikipedia article:

Map showing all locations mentioned on Wikipedia article:

The Tank, Infantry, Mk IV (A22) was a heavy Britishmarker infantry tank used in the Second World War, best known for its heavy armour, large longitudinal chassis with all-around tracks with multiple bogies, and its use as the basis of many specialist vehicles. This series of tanks was named after Winston Churchill, who was Prime Minister of the United Kingdom and Minister of Defence at the time, and had been involved with the development of the tank as a weapon during the First World War.



Initially specified before the outbreak of the Second World War the (General Staff designation) A20 was to be the replacement for the Matilda II and Valentine infantry tanks. In accordance with British infantry tank doctrine and based on the expected needs of World War I-style trench warfare, the tank was required to be capable of navigating shell-cratered ground, demolishing infantry obstacles such as barbed wire, and attacking fixed enemy defences; for these purposes, great speed and heavy armament was not required.

The task of design and construction of the A20 was given to Harland and Wolffmarker who completed four prototypes by June 1940. The vehicle was armed with two 2-pounder guns each located in a side sponson and plans existed for an additional third gun in a central turret. Even by this point the sponson idea had fallen out of favour for turret- and hull-mounted guns. The A20 designs were short-lived however, as at roughly the same time the emergency evacuation of the British Expeditionary Force from Dunkirkmarker occurred.


With France conquered, the scenario of trench warfare in Northern Europe was no longer applicable and the design was revised by Dr. H.E. Merritt, Director of Tank Design at Woolwich Arsenal, based on the combat witnessed in Poland and France. These new specifications, for the A22 or Infantry Tank Mark IV, were given to Vauxhall in June 1940.

With German invasion looking imminent and the United Kingdom having lost most of its military vehicles in the evacuation from France, the War Officemarker specified that the A22 had to enter production within the year. By July 1940 the design was complete and by December of that year the first prototypes were completed; in June 1941, almost exactly a year as specified, the first Churchill tanks began rolling off the production line.

The tank shipped with a document from the manufacturer which stated that it had great confidence in the fundamental design of the tank but that the model had been put into production without time for proper honing and that improvements would be made in time.

This hasty development had not come without cost though, as there had been little in the way of testing and the Churchill was plagued with mechanical faults. Most apparent was that the Churchill's engine was underpowered and unreliable, and difficult to access for servicing. Another serious shortcoming was the tank's weak armament, the 2 pounder 40 millimetre gun, which was improved by the addition of a 3 inch howitzer in the hull (the Mk IICS had the howitzer in the turret) to deliver an HE shell albeit not on howitzer type trajectories. These flaws contributed to the tank's poor performance in its first use in combat, the disastrous Dieppe Raid in August, 1942.

The poor performance of the Churchill nearly caused production to be ceased in favour of the upcoming Cromwell tank; it was saved by the production of the much improved Mk III which appeared in March 1942 and was first used in the Second Battle of El Alameinmarker in October of that year. In this 'second chance' a select group of five Mk III's, known collectively as 'King Force' went into battle. Although all were heavily shelled by German anti-tank guns, all but one made it back with little damage; one tank was said to have been hit up to 80 times. In the following Tunisia and Italian campaigns, the Mk III and its immediate successors continued to prove their usefulness. There were many mechanical improvements, and the Mk III used the 6 pounder gun (57 millimetre) in a new turret design. In one encounter the updated Churchill tank even eliminated a heavy German Tiger I tank; the 'kill' was achieved by the 6-pdr shot becoming lodged between the Tiger's turret and turret ring. The crew abandoned the Tiger, which was subsequently captured by the British. This particular tank is on display at Bovington Tank Museum in the United Kingdom.

The second major improvement in the Churchill's design, the Mk VII saw first used in the Battle of Normandy in 1944. The Mk VII improved on the already heavy armour of the Churchill with a wider chassis and the 75 mm gun which had been introduced on the Mk VI. It was primarily this variant, the A22F, which served through the remainder of war and was redesignated as A42 in 1945.

The Churchill was notable for its versatility and was utilized in numerous specialist roles. Additionally, in tests conducted in the Madangmarker by the Australian Army in mid-1944, at the request of the British War Office, the Churchill was tested against the M4 Sherman and found it to be, overall, a superior tank for jungle warfare.

The Soviet Unionmarker received a total of 301 Churchill Mk. III and Mk. IV types as part of the Lend-Lease program.

The tank remained in the service of the British Army until 1952 with one, a bridgelayer, remaining in service well into the 1970s.

Irish Army Service

The Irish Army took delivery of four Churchill Mk VI tanks in 1948. They were rented from the British War Office as trials vehicles until 1954, when they were purchased outright. This purchase was despite the fact that the supply and transport corps workshops, who maintained them, had reported that spares had all but run out. Experiments were carried out involving replacing the existing Bedfordmarker engine with a Rolls Royce Merlin engine salvaged from an Irish Air Corps Seafire aeroplane. The experiment was not a success, although the reasons are not recorded. By 1967 only one Churchill remained serviceable, and by 1969 all were retired. One remains preserved in the Curragh Camp. In general the Army has always relied upon lighter, more maneuverable armoured vehicles, such as the Panhard AML and FV101 Scorpion of modern times.


The hull was made up of simple flat plates initially bolted but later welded together. The hull was split into four compartments: the driver's position at the front, then the fighting compartment including the turret, the engine compartment, and the gearbox compartment. The suspension was fitted under the two large "panniers" on either side of the hull, the track running over the top. There were eleven bogies either side, each carrying two 10-inch wheels. Only nine of the bogies were taking the vehicle weight normally, the front coming into play when the vehicle nosed into the ground or against an obstacle, the rear acting in part as a track tensioner. Due to the number of wheels, the tank could survive losing several without much in the way of adverse affects as well as traversing steeper terrain obstacles. As the tracks ran around the panniers, escape hatches in the side could be incorporated into the design. These were retained throughout the revisions of the Churchill and were of particular use when the Churchill was adopted as the AVRE.

The twin engines were connected through a common crankshaft feeding a regenerative transmission steered by a tiller bar rather than levers or steering wheel. The Churchill was also the first tank to utilize the Merritt-Brown gear-box, which allowed the tank to be steered by changing the relative speeds of the two tracks; this effect was more pronounced as the gears were lowered, allowing the tank to fully turn on its own axis while in neutral.

The first turrets were cast with a rounded shape, sufficient for the relatively small 2 pounder gun. To fulfil its role as an infantry support vehicle the first models were equipped with a 3 inch howitzer in the hull in a layout very similar to the French Char B. This enabled the tank to deliver a useful HE round while retaining the antitank capabilities of the 2-pounder. However, like other multi-gun tanks, it was limited by a poor fire arc - the entire tank had to be turned to change the aim of the hull gun. The Mk II dispensed with the howitzer and replaced it with a bow machine gun and on the Mk III, the 2-pounder was replaced with the 6-pounder, significantly increasing the tank's anti-tank capabilities. The tank underwent field modification in North Africa with several Churchills being fitted with the 75 mm gun of destroyed M4 Shermans. These "NA75" variants were used in Italy. The use of the 75 mm, which was inferior as an anti-tank weapon to the 6-pounder but better as an all-around gun was soon made standard on successive versions. All turrets for the various Churchills made use of the Vickers Tank Periscope MK.IV.

The armour on the Churchill, often considered its most important trait, was originally specified to a minimum of 16 mm and a maximum of 102 mm; this was increased with the Mk VII to a range from 25 mm to 152 mm. Though this armour was considerably thicker than its rivals (including the German Tiger I tank, but not the Tiger II) it was not sloped, reducing its effectiveness. Earlier models were given extra armour by the expedient of welding extra plates on.

Because the engines on the Churchill were never upgraded, the tank became increasingly slower as additional armour and armament was equipped and weight increased; while the Mk I weighed 39,118 kg and the Mk III weighed 39,626 kg, the Mk VII weighed 40,643 kg. This caused a reduction in maximum speed of the tank from its original 26 km/h down to 20.5 km/h. The engines also suffered from many mechanical problems.

Another problem was the tank's relatively small turret that prevented the use of powerful weapons, but the 75 mm gun had reasonable power. Although the thick armour could withstand several hits from any German AT gun, even some from the famous 88, the guns often lacked punch to fight back effectively. While earlier Churchills could outgun many German medium tanks, like the Panzer IV's short-barrel version and the Panzer III's 50 mm gun with its 6 pdr, in late war the Churchill was armed with a general use 75 mm gun while Germans had 75 mm high-velocity cannons as their main armament.

The Churchill had many variations, including many specialised modifications. The most significant change to the Churchill was that it was upgunned from 2-pounder to 6-pounder and then 75 mm guns over the course of the war. By the war's end, the late model Churchill MK VII had exceptional amounts of armour - considerably more than the German Tiger tank. However, the firepower weakness was never fully addressed. The Mark VII turret that was designed for the 75 mm gun was of composite construction - cast with top and bottom plates welded into position.

It is important to note, that despite its weaknesses, the Churchill had a significant advantage that was apparent throughout its career. Due to its multiple bogie suspension, it could cross terrain obstacles that most other tanks of its era could not. This feat served well, especially during the fighting in Normandy particularly the capture of Hill 309 between the 30 and 31 July 1944 in operation Bluecoatmarker conducted by VIII Corps.


Tank, Infantry, Mk IV Churchill I (with howitzer), "gate guardian" at Bovington Tank Museum


Churchill I (303)

Equipped with a 2 pounder gun in the turret (150 rounds), and a coaxial Besa machine gun. There was a 3 inch howitzer in the hull (58 rounds). It was a tank that was noted for poor mechanical reliability. It was the main tank issued to the Canadianmarker forces at Dieppe.

Churchill Mk II (1,127)

Replaced the hull howitzer for another machine gun to reduce cost and complexity. Sometimes referred to as Churchill Ia.

Churchill Mk IICS (Close Support)

Placed the gun in the hull and the howitzer in the turret, available in very limited numbers. Sometimes called Churchill II.

Churchill Mk III (675)

The III was the first major armament overhaul of the series, eliminating the hull howitzer and equipping the tank with a more powerful 6 pounder gun (84 rounds). Unlike early versions, it had a welded turret.

Churchill Mk IV (1,622)

The IV was the most numerous Churchill produced, and was virtually identical to the III, the largest change being a return to the less costly cast turret.

Churchill Mk V (241)

A Churchill III / IV which was equipped with a close support 95 mm howitzer in place of the main gun (47 rounds).

Churchill Mk VI (200)

Along with several minor improvements, it was produced as standard with the 75 mm Mk V gun. Few were built due to the near release of the VII and current upgunning of the III / IV.

Tank, Infantry, Mk IV, Churchill VII (A22F)
Churchill Mk VII (A22F) (1,600 with VIII)

The second major redesign from previous models, the VII used the 75 mm gun, was wider and had much more armour. It is sometimes called the Heavy Churchill. This version of the Churchill first saw service in the Battle of Normandy, and was redesignated A42 in 1945.

Churchill Mk VIII

A Churchill VII which replaced the main gun with a 95 mm howitzer (47 rounds).

Refitted previous versions:

Churchill Mk IX

Churchill III / IV upgraded with turret of the VII. Extra armour added along with gearbox and suspension modifications. If the old 6 pounder (2.7 kg) had been retained, it would have the additional designation of LT ("Light Turret").

Churchill Mk X

The same improvements as for the IX applied to a Mk VI.

Churchill Mk XI

Churchill V with extra armour and Mk VIII turret.


This was the second major redesign from previous models and it used the 75 mm gun, with wider tracks and had much more armour. A commanders cupola similar to those fitted to German tanks was also fitted, which allowed visibility from the turret without the need to be outside the hatch. It is sometimes called the Heavy Churchill and first saw service in the Battle of Normandy, and was redesignated A42 in 1945.

Specialist vehicles

Churchill Oke (3)

A Churchill II or III with a flamethrower. The Oke flamethrowing tank was named after its designer, Major J.M. Oke. The design was basically for a Churchill tank fitted with the Ronson flamethrower equipment. A tank containing the flame fuel was fitted at the rear, with a pipe from it leading to the mounting on the front hull to the left, leaving the hull machine gun unobstructed. There were three ("Boar", "Beetle" and "Bull") present at Dieppe which were quickly lost, and abandoned.

Churchill NA75 (120)

Churchill III / IV with upgraded weaponry using the turret and mantlet from a destroyed or scrapped Sherman (known as NA 75 from North Africa where the conversions took place), or having their current gun rebored to 75 mm (III* / IV (75 mm) ) (84 rounds). More IVs were modified than IIIs, and their performance is virtually identical to the VI. To fit the Sherman mantlet required cutting away the front of the Churchill turret before it was welded in place, then the mantlet slot had to be cut away to give sufficient elevation. The Sherman 75 mm gun was designed for a left hand loader and the Churchill in common with British practice had a right hand loader. The gun was therefore turned upside down and the firing controls adapted.

Churchill AVRE with fascine on tilt-forward cradle.
This particular example is a post-WW2 AVRE on the MK VII chassis.
AVRE 290mm Petard Mortar and its ammunition.
Churchill AVRE (Armoured Vehicle Royal Engineers)

A Churchill III or IV equipped with the Petard, a 290 mm Spigot mortar, throwing the "Flying dustbin" with its 28 pound high explosive warhead; a weapon designed for the quick levelling of fortifications developed by MD1. The AVRE was designed after the Canadian defeat at Dieppe, and could also be equipped with numerous other attachments, such as mine flails, fascine rollers, explosive placers etc. Post war the Churchill AVRE was re-armed with a breech-loaded low velocity 165mm demolition gun which was less dangerous for the loader (the hull gunner) as he previously had to stick his head and torso out of the Spigot Mortar armed AVRE to load the Mortar. The crew of six are from the Royal Engineers, except for the driver which came from the Royal Armoured Corps. One of the RE crew is a demolitions NCO sapper who is responsible for priming the "Flying dustbin" and is also tasked with leading the crew when they dismount the tank to place demolition charges ("Wade" charges).

Churchill ARV (Armoured Recovery Vehicle)

Mk I - A turretless Mk I with a jib. Mk II - A Churchill with a fixed turret/superstructure with a dummy gun. It was equipped for recovering other tanks from the battlefield. Mounted a front jib with a 7.5 ton capacity, a rear jib rated for 15 ton and winch that could pull 25 ton. Crew was 3 with enough room for the crew of the tank being recovered. Armament was single Besa machine gun.

Churchill Ark Mk II.
Churchill ARK (Armoured Ramp Karrier)

A turretless Churchill with ramps at either end and along the body to form a mobile bridge. The Mark 1 had trackways over the tracks for vehicles to drive along. The Mark 2 was an improvised version and crossing vehicles drove directly on the Churchill's tracks.

Churchill Crocodile (no more than 800)

The Crocodile was a Churchill VII which was converted by replacing the hull machine gun with a flamethrower. The fuel was in an armoured wheeled trailer towed behind. It could fire several 1 second bursts over 150 yards. The Crocodile was one of "Hobart's Funnies" - another vehicle used by the 79th Armoured Division. A working example can still be seen at the Cobbaton Combat Collection in North Devon.
Churchill Crocodile

Gun Carrier, 3in, Mk I, Churchill (A22D) (50)

A fixed superstructure with the gun in a ball mount. Fifty were built in 1942 but none are known to have been used - the 17 pdr anti-tank gun gave the British the necessary firepower.

Churchill Flail FV3902 or Toad

A post-war (1950s) mine-clearing flail tank built on a Churchill chassis.

Churchill Goat

A chargelayer like the Double Onion device.

Churchill Great Eastern
A larger ramp than the ARK for crossing 60 ft. Ten built and two delivered in 1945 but not used in action.
A postwar Churchill Kangaroo viewed from the rear corner
Churchill Kangaroo

Churchill hull converted to an APC.

Image:Churchill mk1 cfb borden 2.JPG|Churchill Mk IImage:ChurchillTank.jpg|Churchill CrocodileImage:Churchill AVRE Petard.jpg|A close-up of the Churchill AVRE's Petard demolition mortar

Designs based on chassis

In 1943 an attempt was made to upgun the Churchill by using Heavy Churchill tanks modified to take a 17pdr gun similar to a Sherman Firefly, this resulted in the six Tank, Infantry, Black Prince in May 1945. The project was cancelled due to the emergence of the new and less sophisticated Centurion Mk1 which offered the same armament and armour and had just entered production.


The Churchill was replaced with the Centurion except for Ireland who retired it without replacement.


  1. Churchill Infantry Tank 1941-1945 p4
  2. who was also responsible for the triple differential design of the Merritt-Brown gearbox used in the Churchill
  5. Churchill Infantry Tank 1941-1945 p9
  6. 800 Crocodile conversion kits were produced (Churchill's Secret Weapons p71)
  7. Churchill Great Eastern Ramp


  • An Illustrated Data Guide to Battle Tanks of World War II. Compiled by Christopher Chant.

External links

Embed code:

Got something to say? Make a comment.
Your name
Your email address