A
Compact Disc (also known as a
CD) is an
optical disc
used to store
digital data. It was
originally developed to store sound recordings exclusively, but
later it also allowed the preservation of other types of data.
Audio CDs have been commercially available since October 1982. In
2009, they remain the standard physical storage medium for
audio.
Standard CDs have a diameter of 120 mm and can hold up to 80
minutes of uncompressed audio (700 MB of data). The
Mini CD has various diameters ranging from 60 to
80 mm; they are sometimes used for CD singles or device
drivers, storing up to 24 minutes of audio.
The technology was eventually adapted and expanded to encompass
data storage
CD-ROM, write-once audio and
data storage
CD-R, rewritable media
CD-RW, Video Compact Discs (
VCD),
Super Video Compact Discs (
SVCD), PhotoCD,
PictureCD, CD-i, and Enhanced CD.
CD-ROMs and CD-Rs remain widely used technologies in the
computer industry. The CD and its
extensions are successful: in 2004, worldwide sales of CD audio,
CD-ROM, and CD-R reached about 30 billion discs. By 2007, 200
billion CDs had been sold worldwide.
History
The compact disc is a spin-off of the
Laserdisc technology.
Philips publicly
demonstrated a prototype of an optical digital audio disc at a
press conference called "Philips Introduce Compact Disc" in
Eindhoven
, The
Netherlands
on March 8,
1979. Three years earlier,
Sony first
publicly demonstrated an optical digital audio disc in September
1976. In September 1978, they demonstrated an optical digital audio
disc with a 150 minute playing time, and with specifications of
44,056 Hz sampling rate, 16-bit linear resolution,
cross-interleaved
error correction code, that were
similar to those of the Compact Disc introduced in 1982.
Technical
details of Sony's digital audio disc were presented during the 62nd
AES Convention, held on
March 13-16, 1979 in Brussels
.
Later that year,
Sony and
Philips Consumer Electronics
(Philips) set up a joint task force of engineers to design a new
digital audio disc. The task force, led by prominent members
Kees Schouhamer Immink and
Toshitada Doi (
土井利忠),
progressed the research into
laser technology
and
optical discs that had been
started independently by Philips and Sony in 1977 and 1975,
respectively. After a year of experimentation and discussion, the
taskforce produced the
Red Book, the Compact Disc
standard. Philips contributed the general
manufacturing process, based on video Laserdisc
technology. Philips also contributed
Eight-to-Fourteen Modulation
(EFM), which offers both a long playing time and a high resilience
against disc defects such as scratches and fingerprints, while Sony
contributed the
error-correction
method,
CIRC.
The
Compact Disc Story, told by a former member of the
taskforce, gives background information on the many technical
decisions made, including the choice of the sampling frequency,
playing time, and disc diameter. The taskforce consisted of around
four to eight persons, though according to Philips, the compact
disc was thus "invented collectively by a large group of people
working as a team."
The first test CD was pressed in Hannover, Germany by the Polydor
Pressing Operations plant in 1981. The disc contained a recording
of
Richard Strauss's
Eine Alpensinfonie, played by the
Berlin Philharmonic and
conducted by
Herbert von
Karajan. The first public demonstration was on the
BBC TV show
Tomorrow's
World when
The Bee Gees' 1981 album
Living Eyes
was played. In August 1982 the real pressing was ready to begin in
the new factory, not far from the place where
Emil Berliner had produced his first
gramophone record 93 years earlier. By now, Deutsche Grammophon,
Berliner's company and the publisher of the Strauss recording, had
become a part of PolyGram. The first CD to be manufactured at the
new factory was
The
Visitors by
ABBA. The first album to
be
released on CD was Billy Joel's
52nd Street, that reached the
market alongside Sony's
CD
player CDP-101 on October 1, 1982 in Japan. Early the following
year on March 2, 1983 CD players and discs (16 titles from CBS
Records) were released in the United States and other markets. This
event is often seen as the "Big Bang" of the digital audio
revolution. The new audio disc was enthusiastically received,
especially in the early-adopting
classical music and
audiophile communities and its handling quality
received particular praise. As the price of players sank rapidly,
the CD began to gain popularity in the larger popular and rock
music markets. The first artist to sell a million copies on CD was
Dire Straits, with its 1985 album
Brothers in Arms. The first
major artist to have his entire catalogue converted to CD was David
Bowie, whose 15 studio albums were made available by RCA in
February 1985, along with four Greatest Hits albums. In 1988, 400
million CDs were manufactured by 50 pressing plants around the
world. To date, the biggest selling CD (as opposed to the biggest
selling title) is Beatles "1", released in November 2000, with
worldwide sales of 30 million discs.
The CD was planned to be the successor of the
gramophone record for playing music,
rather than primarily as a data storage medium. Only later did the
concept of an "audio file" arise, and its generalization to a data
file. From its origins as a musical format, CDs have grown to
encompass other applications. In June 1985, the computer readable
CD-ROM (read-only memory) and, in 1990,
CD-Recordable were introduced, also developed
by both Sony and Philips. The CD's compact format has largely
replaced the audio
cassette player
in new automobile applications, and recordable CDs are an
alternative to tape for recording music and copying music albums
without defects introduced in compression used in other digital
recording methods. Other newer video formats such as DVD and
Blu-ray have used the same form factor as CDs, and video players
can usually play audio CDs as well.
With the advent of the
MP3 in the 2000s, the
sales of CDs has dropped in seven out of the last eight years. In
2008, large label CD sales dropped 20%, although independent and
DIY music sales may be tracking better according to figures
released March 30, 2009.
Physical details
A CD is made from 1.2 mm thick, almost-pure
polycarbonate plastic and weighs 15–20 grams.
From the center outward components are at the center (spindle)
hole, the first-transition area (clamping ring), the clamping area
(stacking ring), the second-transition area (mirror band), the
information (data) area, and the rim.
A thin layer of aluminium or, more rarely, gold is applied to the
surface to make it reflective, and is protected by a film of
lacquer that is normally spin coated directly on top of the
reflective layer, upon which the label print is applied. Common
printing methods for CDs are
screen-printing and
offset printing.
CD data are stored as a series of tiny indentations known as
"
pits", encoded in a spiral track molded into the top of
the polycarbonate layer. The areas between pits are known as
"lands". Each pit is approximately 100
nm deep by 500 nm wide, and varies from
850 nm to 3.5
µm in
length.
The distance between the tracks, the pitch, is 1.6 µm. A CD is
read by focusing a 780 nm
wavelength
(
near infrared)
semiconductor laser through the bottom
of the polycarbonate layer. The change in height between pits
(actually ridges as seen by the laser) and lands results in a
difference in intensity in the light reflected. By measuring the
intensity change with a
photodiode, the
data can be read from the disc.
The pits and lands themselves do not directly represent the zeros
and ones of
binary data. Instead,
Non-return-to-zero,
inverted (NRZI) encoding is used: a change from pit to land or
land to pit indicates a one, while no change indicates a series of
zeros. There must be at least two and no more than ten zeros
between each one, which is defined by the length of the pit. This
in turn is decoded by reversing the Eight-to-Fourteen Modulation
used in mastering the disc, and then reversing the
Cross-Interleaved
Reed-Solomon Coding, finally revealing the raw data stored on
the disc.
CDs are susceptible to damage from both daily use and environmental
exposure. Pits are much closer to the label side of a disc, so that
defects and dirt on the clear side can be out of focus during
playback. Consequently, CDs suffer more scratch damage on the label
side whereas scratches on the clear side can be repaired by
refilling them with similar refractive plastic, or by careful
polishing. Initial music CDs were known to suffer from "
CD rot", or "laser rot", in which the internal
reflective layer degrades. When this occurs the CD may become
unplayable.
Disc shapes and diameters
The digital data on a CD begin at the center of the disc and
proceeds toward the edge, which allows adaptation to the different
size formats available. Standard CDs are available in two sizes. By
far the most common is 120 mm in diameter, with a 74- or
80-minute audio capacity and a 650 or 700 MB data capacity.
This diameter has also been adopted by later formats, including
Super Audio CD,
DVD,
HD DVD, and
Blu-ray Disc. 80 mm discs ("
Mini CDs") were originally designed for CD
singles and can hold up to 21 minutes of
music or 184 MB of data but never really became popular.
Today, nearly every single is released on a 120 mm CD, called
a
Maxi single.
Novelty CDs are also available in numerous shapes and sizes, and
are used mostly for marketing. A common variant is a "business
card" CD, a single with portions removed at the top and bottom to
more closely resemble a business card.
| Physical size |
Audio Capacity |
CD-ROM Data Capacity |
Note |
| 12 cm |
74–99 min |
650–870 MB |
Standard size |
| 8 cm |
21–24 min |
185–210 MB |
Mini-CD size |
| 85x54 mm - 86x64 mm |
~6 min |
10-65 MB |
"Business card" size |
Logical formats
Audio CD
The logical format of an audio CD (officially Compact Disc Digital
Audio or CD-DA) is described in a document produced by the format's
joint creators, Sony and Philips in 1980. The document is known
colloquially as the "
Red
Book" after the color of its cover. The format is a two-channel
16-bit
PCM encoding at a
44.1 kHz
sampling rate per
channel. Four-channel sound is an allowable option within the Red
Book format, but has never been implemented.
Monaural audio has no existing standard on a Red
Book CD; mono-source material is usually presented as two identical
channels on a 'stereo' track.
The selection of the sample rate was primarily based on the need to
reproduce the audible frequency range of 20 Hz - 20 kHz.
The
Nyquist–Shannon
sampling theorem states that a sampling rate of more than
double the maximum frequency of the signal to be recorded is
needed, resulting in a required rate of at least 40 kHz. The
exact sampling rate of 44.1 kHz was inherited from a method of
converting digital audio into an analog video signal for storage on
U-matic video tape, which was the most
affordable way to transfer data from the recording studio to the CD
manufacturer at the time the CD specification was being developed.
The device that turns an analog audio signal into PCM audio, which
in turn is changed into an analog video signal is called a
PCM adaptor. This technology could store six
samples (three samples per stereo channel) in a single horizontal
line. A standard
NTSC video signal has 245
usable lines per field, and 59.94 fields/s, which works out at
44,056 samples/s/stereo channel. Similarly,
PAL
has 294 lines and 50 fields, which gives 44,100 samples/s/stereo
channel. This system could either store 14-bit samples with some
error correction, or 16-bit samples with almost no error
correction.
There was a long debate over whether to use 14-bit (Philips) or
16-bit (Sony)
quantization, and 44,056
or 44,100 samples/s (Sony) or around 44,000 samples/s (Philips).
When the Sony/Philips task force designed the Compact Disc, Philips
had already developed a 14-bit
D/A converter, but Sony insisted
on 16-bit. In the end, 16 bits and 44.1 kilosamples per second
prevailed. Philips found a way to produce 16-bit quality using
their 14-bit DAC by using four times
oversampling.
Storage capacity and playing time
The partners aimed at a playing time of 60 minutes with a disc
diameter of 100 mm (Sony) or 115 mm (Philips).
Von
Karajan suggested extending the capacity to 74 minutes to
accommodate Wilhelm
Furtwängler's recording of Beethoven's 9th Symphony from the
1951 Bayreuth
Festival
.
The extra 14-minute playing time subsequently required changing to
a 120 mm disc. Kees Immink, Philips' chief engineer, however,
denies this, claiming that the increase was motivated by technical
considerations, and that even after the increase in size, the
Furtwängler recording would not have fit on one of the earliest
CDs. According to a
Sunday Tribune
interview, the story is slightly more involved. In 1979, Philips
owned
Polygram, one of the world's largest
distributors of music. Polygram had set up a large experimental CD
plant in Hanover, Germany, which could produce huge numbers of CDs
having, of course, a diameter of 115 mm. Sony did not yet have
such a facility. If Sony had agreed on the 115-mm disc, Philips
would have had a significant competitive edge in the market. Sony
decided that something had to be done. The long playing time of
Beethoven's Ninth Symphony imposed by
Ohga was used to push Philips to accept
120 mm, so that Philips' Polygram lost its edge on disc
fabrication.
The 74-minute playing time of a CD, which was longer than the 20
minutes per side typical of long-playing (LP) vinyl albums, was
often used to the CD's advantage during the early years when CDs
and LPs vied for commercial sales. CDs would often be released with
one or more bonus tracks, enticing consumers to buy the CD for the
extra material. However, attempts to combine double LPs onto one CD
occasionally resulted in an opposing situation in which the CD
would actually offer fewer tracks than the LP equivalent. An
example is the 1987 album
Kiss Me, Kiss Me, Kiss Me by
The Cure, which states in the CD liner
notes: "The track
Hey You!!! which appears on the double
album and cassette has been omitted so as to facilitate a single
compact disc." The 2006 re-release of this album saw the inclusion
of the missing track. Another example is the original late-1980s
Warner Bros. Records reissue of
Fleetwood Mac's
Tusk album, which substituted the long
album version of "Sara" with the shorter single version. Enough
complaints were lodged to eventually convince Warner Bros. to
remaster the album in the mid-1990s with the original contents
intact.
Main physical parameters
The main parameters of the CD (taken from the September 1983 issue
of the
Red Book) are as
follows:
- Scanning velocity: 1.2–1.4 m/s (constant linear velocity) –
equivalent to approximately 500 rpm at the inside of the disc, and
approximately 200 rpm at the outside edge. (A disc played from
beginning to end slows down during playback.)
- Track pitch: 1.6 µm
- Disc diameter 120 mm
- Disc thickness: 1.2 mm
- Inner radius program area: 25 mm
- Outer radius program area: 58 mm
- Center spindle hole diameter: 15 mm
The program area is 86.05 cm² and the length of the recordable
spiral is
(86.05 cm² / 1.6 µm) = 5.38 km.
With a scanning speed of 1.2 m/s, the playing time is
74 minutes, or around 650 MB of data on a CD-ROM. If the
disc diameter were only 115 mm, the maximum playing time would
have been 68 minutes, i.e., less six minutes. A disc with data
packed slightly more densely is tolerated by most players (though
some old ones fail). Using a linear velocity of 1.2 m/s and a
track pitch of 1.5 µm leads to a playing time of
80 minutes, or a capacity of 700 MB. Even higher
capacities on non-standard discs (up to 99 minutes) are available
at least as recordables, but generally the tighter the tracks are
squeezed, the worse the compatibility.
Data structure
The smallest entity in a CD is called a
frame, which
consists of 33 bytes and contains six complete 16-bit stereo
samples (two bytes × two channels × six samples: equals 24 bytes).
The other nine bytes consist of eight CIRC error-correction bytes
and one
subcode byte, used for
control and display. Each byte is translated into a 14-bit word
using eight-to-fourteen modulation, which alternates with three-bit
merging words. In total there are 33 × (14 + 3) = 561 bits. A
27-bit unique synchronization word is added, so that the number of
bits in a frame totals 588 (of which only 192 bits are
music).
These 588-bit frames are in turn grouped into sectors. Each sector
contains 98 frames, totaling 98 × 24 = 2352 bytes of music. The CD
is played at a speed of 75 sectors per second, which results in
176,400 bytes per second. Divided by two channels and two bytes per
sample, this results in a sample rate of 44,100 samples per
second.
For CD-ROM data discs, the physical frame and sector sizes are the
same. Since error concealment cannot be applied to non-audio data
in case the CIRC error correction fails to recover the user data, a
third layer of error correction is defined, reducing the payload to
2048 bytes per sector for the Mode-1 CD-ROM format. To increase the
data-rate for
Video CD, Mode-2 CD-ROM, the
third layer has been omitted, increasing the payload to 2336
user-available bytes per sector, only 16 bytes (for synchronization
and header data) less than available in Red-Book audio.
"Frame"
For the Red Book stereo audio CD, the time format is commonly
measured in minutes, seconds and frames (mm:ss:ff), where one frame
corresponds to one sector, or 1/75th of a second of stereo sound.
In this context, the term
frame is erroneously applied in
editing applications and does not denote the physical frame
described above. In editing and extracting, the frame is the
smallest addressable time interval for an audio CD, meaning that
track start and end positions can only be defined in 1/75 second
steps.
Logical structure
The largest entity on a CD is called a track. A CD can contain up
to 99 tracks (including a data track for
mixed mode discs). Each track can in turn have up
to 100 indexes, though players which handle this feature are rarely
found outside of
pro audio, particularly
radio broadcasting. The vast majority of songs are recorded under
index 1, with the
pre-gap being index 0.
Sometimes
hidden tracks are placed at
the end of the last track of the disc, often using index 2 or 3.
This is also the case with some discs offering "101 sound effects",
with 100 and 101 being indexed as two and three on track 99. The
index, if used, is occasionally put on the track listing as a
decimal part of the track number, such as 99.2 or 99.3. (
Information Society's
Hack was one of very few CD
releases to do this, following a release with an equally-obscure
CD+G feature.) The track and index structure of the CD carried
forward to the DVD as title and chapter, respectively.
Manufacturing tolerances
Current manufacturing processes allow an audio CD to contain up to
80 minutes (variable from one replication plant to another) without
requiring the content creator to sign a waiver releasing the plant
owner from responsibility if the CD produced is marginally or
entirely unreadable by some playback equipment. Thus, in current
practice, maximum CD playing time has crept higher by reducing
minimum engineering tolerances; by and large, this has not
unacceptably reduced reliability.
CD-Text
CD-Text is an extension of the Red Book specification for audio CD
that allows for storage of additional text information (e.g., album
name, song name, artist) on a standards-compliant audio CD. The
information is stored either in the
lead-in area of the CD, where
there is roughly five kilobytes of space available, or in the
subcode channels R to W on the
disc, which can store about 31 megabytes.
CD + Graphics
Compact Disc + Graphics (CD+G) is a special audio compact disc that
contains graphics data in addition to the audio data on the disc.
The disc can be played on a regular audio CD player, but when
played on a special CD+G player, can output a graphics signal
(typically, the CD+G player is hooked up to a television set or a
computer monitor); these graphics are almost exclusively used to
display lyrics on a television set for
karaoke performers to sing along with.
CD + Extended Graphics
Compact Disc + Extended Graphics (CD+EG, also known as CD+XG) is an
improved variant of the
Compact Disc +
Graphics (CD+G) format. Like CD+G, CD+EG utilizes basic CD-ROM
features to display text and video information in addition to the
music being played. This extra data is stored in
subcode channels R-W. Very few, if any,
CD+EG discs have been published.
Super Audio CD
Super Audio CD (SACD) is a high-resolution read-only
optical audio disc
format that provides much
higher
fidelity digital audio reproduction than the Red Book.
Introduced in 1999, it was developed by Sony and Philips, the same
companies that created the Red Book. SACD was in a
format war with
DVD-Audio, but neither has replaced audio
CDs.
In contrast to DVD-Audio, the SACD format has the feature of being
able to produce hybrid discs; these discs contain the SACD audio
stream as well as a standard audio CD layer which is playable in
standard CD players, thus making them
backward compatible.
CD-MIDI
CD-
MIDI is a
format used to store music-performance data which upon playback is
performed by electronic instruments that synthesize the audio.
Hence, unlike Red Book, these recordings are not audio.
CD-ROM
For the first few years of its existence, the Compact Disc was a
medium used purely for audio. However, in 1985 the
Yellow Book CD-ROM standard
was established by Sony and Philips, which defined a non-volatile
optical data
computer data storage
medium using the same physical format as audio compact discs,
readable by a computer with a CD-ROM drive.
Video CD (VCD)
Video CD (VCD, View CD, and Compact Disc digital video) is a
standard
digital format for storing video
media on a CD. VCDs are playable in dedicated VCD players, most
modern
DVD-Video players, personal
computers, and some video game consoles.
The VCD standard was created in 1993 by Sony, Philips,
Matsushita, and
JVC
and is referred to as the
White
Book standard.
Overall picture quality is intended to be comparable to
VHS video. Poorly compressed VCD video can sometimes be
lower quality than VHS video, but VCD exhibits block artifacts
rather than analog noise, and does not deteriorate further with
each use, which may be preferable.
352x240 (or
SIF) resolution was
chosen because it is half the vertical, and half the horizontal
resolution of NTSC video. 352x288 is similarly one quarter
PAL/SECAM resolution. This approximates the (overall) resolution of
an analog VHS tape, which, although it has double the number of
(vertical) scan lines, has a much lower horizontal
resolution.
Super Video CD
Super Video CD (Super Video Compact Disc or SVCD) is a format used
for storing video media on standard compact discs. SVCD was
intended as a successor to VCD and an alternative to DVD-Video, and
falls somewhere between both in terms of technical capability and
picture quality.
SVCD has two-thirds the
resolution of DVD, and over 2.7 times the
resolution of VCD. One CD-R disc can hold up to 60 minutes of
standard quality SVCD-format video. While no specific limit on SVCD
video length is mandated by the specification, one must lower the
video bit rate, and therefore quality, in order to accommodate very
long videos. It is usually difficult to fit much more than 100
minutes of video onto one SVCD without incurring significant
quality loss, and many hardware players are unable to play video
with an instantaneous bit rate lower than 300 to 600
kilobits per second.
Photo CD
Photo CD is a system designed by
Kodak for
digitizing and storing photos on a CD. Launched in 1992, the discs
were designed to hold nearly 100 high quality images, scanned
prints and slides using special proprietary encoding. Photo CD
discs are defined in the
Beige Book
and conform to the
CD-ROM XA and CD-i Bridge
specifications as well. They are intended to play on CD-i players,
Photo CD players and any computer with the suitable software
irrespective of the
operating
system. The images can also be printed out on photographic
paper with a special Kodak machine. This format is not to be
confused with Kodak
Picture CD, which is
a consumer product in CD-ROM format.
CD-i
The Philips "Green Book" specifies the standard for interactive
multimedia compact discs designed for
CD-i
players. This format is unusual because it hides the initial tracks
which contains the software and data files used by CD-i players by
omitting the tracks from the disc's TOC (table of contents). This
causes
audio CD players
to skip the CD-i data tracks. This is different from the
CD-i Ready format, which puts CD-i software and
data into the
pregap
of track 1.
Enhanced CD
Enhanced CD, also known as CD Extra and CD Plus, is a
certification mark of the
Recording Industry
Association of America for various technologies that combine
audio and computer data for use in both compact disc and
CD-ROM players.
The primary data formats for Enhanced Compact Disc's are
mixed mode (
Yellow Book/
Red Book),
CD-i, hidden track, and multisession (
Blue Book).
VinylDisc
VinylDisc is the hybrid of a standard Audio CD and the
vinyl record. The vinyl layer on the
disc's label side can hold approximately three minutes of
music.
Manufacture
Replicated CDs are mass-produced initially using a hydraulic press.
Small granules of raw polycarbonate plastic are fed into the press
while under heat. A screw forces the liquefied plastic into the
mold cavity. The mold closes with a metal stamper in contact with
the disc surface. The plastic is allowed to cool and harden. Once
opened, the disc substrate is removed from the mold by a robotic
arm, and a 15 mm diameter center hole (called a stacking ring)
is removed. The cycle time, the time it takes to "stamp" one CD, is
usually 2–3 seconds.
This method produces the clear plastic blank part of the disc.
After a metallic reflecting layer (usually aluminum, but sometimes
gold or other metals) is applied to the clear blank substrate, the
disc goes under a UV light for curing and it is ready to go to
press. To prepare to press a CD, a glass master is made, using a
high-powered laser on a device similar to a CD writer. The glass
master is a positive image of the desired CD surface (with the
desired microscopic pits and lands). After testing, it is used to
make a die by pressing it against a metal disc.
The die is a negative image of the glass master: several are
typically made, depending on the number of pressing mills that are
to be making the CD. The die then goes into a press and the
physical image is imposed onto the blank CD, leaving a final
positive image on the disc. A small amount of lacquer is then
applied as a ring around the center of the disc, and fast spinning
spreads it evenly over the surface. Edge protection lacquer is also
applied before the disc is finished. The disc can then be printed
and packed.
Manufactured CDs that are sold in stores are sealed via a process
called "polywrapping" or shrink wrapping.
Recordable CD
Recordable compact discs,
CD-Rs, are injection
molded with a "blank" data spiral. A photosensitive dye is then
applied, after which the discs are metalized and lacquer-coated.
The write laser of the
CD recorder
changes the color of the dye to allow the read laser of a standard
CD player to see the data, just as it
would with a standard stamped disc. The resulting discs can be read
by most CD-ROM drives and played in most audio CD players.
CD-R recordings are designed to be permanent. Over time the dye's
physical characteristics may change, however, causing read errors
and data loss until the reading device cannot recover with error
correction methods. The design life is from 20 to 100 years,
depending on the quality of the discs, the quality of the writing
drive, and storage conditions. However, testing has demonstrated
such degradation of some discs in as little as 18 months under
normal storage conditions. This failure is known as
CD rot. CD-Rs follow the
Orange Book standard.
Recordable Audio CD
The Recordable Audio CD is designed to be used in a consumer audio
CD recorder. These consumer audio CD recorders use SCMS (
Serial Copy Management
System), an early form of
digital rights management (DRM),
to conform to the AHRA (
Audio
Home Recording Act). The Recordable Audio CD is typically
somewhat more expensive than CD-R due to (a) lower volume and (b) a
3%
AHRA
royalty used to compensate the music industry for the making of
a copy.
High Capacity Recordable CD
A higher density recording format that can hold about:
- 98.5 minutes of audio on a 12 cm disc (compared to about
80 minutes for Red Book audio).
- 30 minutes of audio on an 8 cm disc (compared to about 24
minutes for Red Book audio).
ReWritable CD
CD-RW is a re-recordable medium that uses a
metallic alloy instead of a dye. The write laser in this case is
used to heat and alter the properties (amorphous vs. crystalline)
of the alloy, and hence change its reflectivity. A CD-RW does not
have as great a difference in reflectivity as a pressed CD or a
CD-R, and so many earlier CD audio players
cannot read
CD-RW discs, although
most later CD audio players and
stand-alone
DVD players can. CD-RWs follow the
Orange Book standard.
High Speed ReWritable CD
Due to technical limitations, the original ReWritable CD could be
written no faster than 4x speed. High Speed ReWritable CD has a
different design that permits writing at speeds ranging from 4x to
12x.
Original CD-RW drives can only write to original ReWritable CD
discs. High Speed CD-RW drives can typically write to both original
ReWritable CD discs and High Speed ReWritable CD discs. Both types
of CD-RW discs can be read in most CD drives.
Even higher speed CD-RW discs, Ultra Speed (16x to 24x write speed)
and Ultra Speed+ (32x write speed), are now available.
ReWritable Audio CD
The ReWritable Audio CD is designed to be used in a consumer audio
CD recorder, which won't (without modification) accept standard
CD-RW discs. These consumer audio CD recorders use SCM
Serial Copy Management System
(SCMS), an early form of
digital rights management (DRM),
to conform to the United States'
Audio Home Recording Act (AHRA).
The ReWritable Audio CD is typically somewhat more expensive than
CD-RW due to (a) lower volume and (b) a 3%
AHRA royalty used to
compensate the music industry for the making of a copy.
Copy protection
The Red Book audio specification, except for a simple 'anti-copy'
bit in the subcode, does not include any serious
copy protection mechanism. Starting in early
2002, attempts were made by record companies to market
"copy-protected" non-standard compact discs, which cannot be
ripped, or copied, to hard drives or easily converted to MP3s. One
major drawback to these copy-protected discs is that most will not
play on either computer CD-ROM drives, or some standalone CD
players that use CD-ROM mechanisms. Philips has stated that such
discs are not permitted to bear the trademarked
Compact Disc
Digital Audio logo because they violate the Red Book
specifications. Numerous copy-protection systems have been
countered by readily available, often free, software.
See also
References
- Maxim, 2004
- The New Schwann Record & Tape Guide Volume 37 No. 2
February 1985
- MAC Audio News. No. 178, November 1989. pp 19-21 Glenn
Baddeley. November 1989 News Update. Melbourne Audio Club
Inc.
- The world's first CD-R was made by the Japanese firm
Taiyo Yuden Co.,
Ltd. in 1988 as part of the joint Philips-Sony development
effort.
- Goldmark, Peter. Maverick inventor; My Turbulent Years at
CBS. New York: Saturday Review Press, 1973.
Further reading
External links