
Munitions rigged for an IED discovered
by Iraqi police in Baghdad in November 2005
An
improvised explosive device
(
IED; also known as a
roadside
bomb due to contemporary use) is a homemade
bomb constructed and deployed in ways other than in
conventional
military action. One may be
constructed of conventional military explosives, such as an
artillery round, attached to a detonating mechanism.
IEDs may be used in
terrorist actions or
in
unconventional warfare by
guerrilla or
commando forces in a
theater of operations. In the 2003–present
Iraq War, IEDs have been used extensively
against coalition forces and by the end of 2007 they have been
responsible for approximately 40% of coalition deaths in Iraq. They
are also the weapon of choice for insurgent groups in the
2001–present
Afghanistan War.
They were
also used extensively by cadres of the rebel Tamil Tiger (LTTE) organization against military
and civilian targets in Sri
Lanka
before the LTTE was dismantled in mid 2009 by the
Sri Lankan military forces.
Background
The term
Improvised Explosive Device comes from the British Army in the 1970s, after the Irish Republican Army (IRA) used bombs
made from agricultural fertilizer and
semtex smuggled from Libya
to make
highly effective booby trap devices,
Remote controlled or bombs using command wires.An IED is a
bomb fabricated in an improvised manner incorporating destructive,
lethal, noxious,
pyrotechnic, or
incendiary chemicals and designed to destroy or
incapacitate personnel or vehicles. In some cases, IEDs are used to
distract, disrupt, or delay an opposing force, facilitating another
type of attack. IEDs may incorporate
military or commercially-sourced explosives, and
often combine both types, or they may otherwise be made with home
made explosives (HME).
An IED typically consists of an explosive charge (potentially
assisted by a booster charge), a
detonator, and an initiation system, which is a
mechanism that initiates the electrical charge that sets off the
device. An IED designed for use against armored targets such as
personnel carriers or tanks will also include some form of armor
penetrator, typically consisting of a copper rod or cone, propelled
by the shaped explosive load. IEDs are extremely diverse in design,
and may contain many types of initiators, detonators, penetrators,
and explosive loads. Antipersonnel IEDs typically also contain
shrapnel-generating objects such as nails
or ball bearings (known as shipyard confetti after the metal waste
found in the shipyards of Belfast). IEDs are triggered by various
methods, including remote control, infra-red or magnetic triggers,
pressure-sensitive bars or trip wires. In some cases, multiple IEDs
are wired together in a daisy-chain, to attack a convoy of vehicles
spread out along a roadway.
IEDs made by inexperienced designers or with substandard materials
may fail to
detonate, and in some cases
actually detonate on either the maker or the emplacer of the device
(these unintended early detonations are known as pre-detonations or
"
own goals" if the placer is killed in the
detonation). Some groups, however, have been known to produce
sophisticated devices that are constructed with components
scavenged from conventional
munitions and
standard consumer
electronics
components, such as
mobile phones,
washing machine timers, pagers, or garage door openers. The
sophistication of an IED depends on the training of the designer
and the tools and materials available.
IEDs may use artillery shells or conventional
high-explosive charges as their explosive
load as well as homemade explosives. However, the threat exists
that toxic
chemical,
biological, or radioactive (
dirty bomb) material may be added to a device,
thereby creating other life-threatening effects beyond the
shrapnel, concussive blasts and fire normally associated with
bombs.
Chlorine liquid has been added to
IEDs in Iraq, producing clouds of chlorine gas.
A
vehicle borne IED, or
VBIED, is
a military term for a
car bomb or truck
bomb. These are typically employed by
suicide bombers, and can carry a relatively
large payload. They can also be detonated from a remote location.
VBIEDs can create additional shrapnel through the destruction of
the vehicle itself, as well as using vehicle fuel as an
incendiary weapon.
Of increasing popularity among insurgent forces in Iraq is the
HBIED or House Borne IED, coming out of the common military
practice of clearing houses, insurgents will rig an entire house to
detonate and collapse shortly after a clearing squad has
entered.
History
One of the first examples of coordinated large-scale use of IEDs
was the
Belarussian
Rail War launched by Belarussian guerrillas against the Germans
during
World War II. Both
command-detonated and delayed-fuse IEDs were used to derail
thousands of German trains during 1943–1944.
Vietnam
IEDs were used during the
Vietnam War by
the
Viet Cong
against land- and river-borne vehicles as well as personnel. They
were commonly constructed using materials from unexploded American
ordnance. Thirty-three percent
of U.S. casualties in Vietnam and twenty-eight percent of deaths
were officially attributed to mines; these figures include losses
caused by both IEDs and commercially manufactured mines.
The
Grenade in a Can was a simple and effective
booby trap. A
hand
grenade with the safety pin removed and safety lever compressed
was placed into a container such as a tin can, with a length of
string or
tripwire attached to the grenade.
The can was fixed in place and the string was stretched across a
path or doorway opening and firmly tied down. Alternatively, the
string could be attached to the moving portion of a door or gate.
When the grenade was pulled out of the can by a person or vehicle
placing tension on the string, the spring-loaded safety lever would
release and the grenade would explode.
The
rubber band grenade was another booby trap. To make
this device, a Viet Cong guerrilla would wrap a strong
rubber band around the spring-loaded safety
lever of a hand grenade and remove the pin. The grenade was then
hidden in a hut. American and
South
Vietnamese soldiers would burn huts regularly to prevent them
from being inhabited again, or to expose
foxholes and
tunnel entrances,
which were frequently concealed within these structures. When a hut
with the booby trap was torched, the rubber band on the grenade
would melt, releasing the safety lever and blowing up the hut. This
would often wound the soldiers with burning bamboo and metal
fragments. This booby trap was also used to destroy vehicles when
the modified grenade was placed in the fuel tank. The rubber band
would be eaten away by the chemical action of the fuel, releasing
the safety lever and detonating the grenade.
Another variant was the
Mason
jar grenade. The safety pin of hand grenades would be
pulled and the grenades would be placed in glass Ball Mason jars
which would hold back the safety lever. The safety lever would
release upon the shattering of the jar and the grenade would
detonate. This particular variant was popular with chopper crews,
who would use them as improvised anti-personnel cluster bombs
during air raids. They were easy to dump out of the flight door
over a target, and the thick Ball Mason glass was resistant to
premature shattering.
Northern Ireland
Throughout
The Troubles, the
Provisional IRA made extensive use of IEDs
in their
1969-1997
campaign. They used
barrack
buster mortars and remote controlled IEDs, the members of the
PIRA developed and counter-developed devices and tactics. PIRA
bombs became highly sophisticated, featuring
anti-handling devices such as a
mercury tilt switch or
microswitches. These devices would
detonate the bomb if it was moved in any way.
Typically, the safety-arming device used was a clockwork Memopark
timer, which armed the bomb five minutes after it was placed by
completing an electrical circuit supplying power to the
anti-handling device. Depending on the particular design (e.g.
boobytrapped briefcase or
car bomb) an
independent electrical circuit supplied power to a conventional
timer set for the intended time delay, e.g. 40 minutes.
However,
some electronic delays developed by PIRA technicians could be set
to accurately detonate a bomb weeks after it was hidden, which is
what happened in the Brighton hotel bomb attack
of 1984. Initially, bombs were detonated
either by timer or by simple command wire. Later bombs could be
detonated by radio control. Initially, simple servos from
radio-controlled aircraft were
used to close the electrical circuit and supply power to the
detonator. After the British developed jammers, PIRA technicians
introduced devices which required a sequence of pulsed radio codes
to arm and detonate them. These were harder to jam.
Roadside bombs were extensively used by the
Provisional IRA. Typically, a roadside bomb
was placed in a drain or culvert along a rural road and exploded by
remote control when
British Army or
other security forces vehicles were passing.
The most lethal
example of these attacks came in 1979, when 18 British soldiers
were killed by two culvert bombs in the Warrenpoint
ambush
. As a result of the use of these bombs, the
British military had to stop transport by road in areas such as
South Armagh, and use
helicopter
transport instead. In the 1980s and 1990s, all
culverts were
welded and
concreted shut, so that explosives could
not be placed in them.
Most IEDs
used commercial or homemade explosives, although the use of
Semtex-H smuggled in from Libya
in the 1980s
was also common from the mid 1980s onwards. Bomb Disposal teams from
321 EOD manned by
Ammunition Technicians were deployed
in those areas to deal with the IED threat.
In the early 1970s, at the height of the PIRA campaign, the
British Army unit tasked with rendering
safe IEDs, 321 EOD, sustained significant casualties while engaged
in bomb disposal operations. This mortality rate was far higher
than other high risk occupations such as deep sea diving, and a
careful review was made of how men were selected for
EOD operations. The review recommended bringing in
psychometric testing of soldiers to
ensure those chosen had the correct mental preparation for high
risk bomb disposal duties.
The IRA came up with ever more sophisticated designs and
deployments of IEDs.
Booby Trap or Victim
Operated IEDs (VOIEDs), were commonplace. The IRA engaged in an
ongoing battle to gain the upper hand in electronic warfare with
remote controlled devices.
The rapid changes in development led 321 EOD
to employ specialists from DERA (now privatised
into QinetiQ
), the
Royal Signals, and Military Intelligence. This
multi-unit approach led to the development and use of most of the
modern weapons, equipment and techniques now used by EOD Operators
throughout the rest of the world.
The
bomb disposal operations were led
by
Ammunition Technicians and
Ammunition Technical
Officers from 321 EOD, and were trained at the
Felix Centre at the
Army School of Ammunition.
Lebanon
Hezbollah made extensive use of IEDs to attack
Israeli
forces after Israel's 1982 invasion of Lebanon.
Israel
withdrew from most of Lebanon
in 1985 but
still kept troops stationed in a buffer
zone in southern Lebanon. Hezbollah frequently used IEDs
to attack Israeli vehicles in this area up until the Israeli
withdrawal in May 2000.
One such bomb killed Israeli
Brigadier
General Erez Gerstein on February 28, 1999, the highest-ranking
Israeli to die in Lebanon since
Yekutiel
Adam's death in 1982.
Also in the
2006
Israel-Lebanon conflict, a
Merkava Mark
II
tank was hit by a pre-positioned
Hezbollah IED, killing all 4
IDF servicemen on board, the first of
two IEDs damaging a
Merkava tank.
Chechnya
IEDs have
also been popular in Chechnya
, where
Russian
forces were engaged in fighting with rebels.
While no concrete statistics are available on this matter, bombs
have accounted for many Russian deaths in both the
First Chechen War (1994–1996) and the
Second (1999–present).
Iraq

Controlled explosion of IED, US Army
in Iraq
In the 2003–present
Iraq War, IEDs have
been used extensively against coalition forces and by the end of
2007 they have been responsible for at least 40% of coalition
deaths in Iraq.
Beginning in July 2003, the
Iraqi
insurgency used IEDs to target
Coalition vehicles. According to
iCasualties.org, as of November 21,
2007 at least 40% of Coalition fatalities in the Iraq War are
caused by IEDs. According to the
Washington Post, 63% of U.S deaths in Iraq
occurred due to IEDs.A French study shows that in Iraq, from March
2003 to November 2006, on a global deaths in the US-led Coalition
soldiers, were caused by IEDs, i.e 41%. That is to say more than in
the "normal fights" (1027 dead, 34%).Insurgents now use the bombs
to target not only Coalition vehicles, but Iraqi police and
civilian transportation as well.
Common locations for placing these bombs on the ground include
animal
carcasses,
soft drink cans, and
boxes. Typically they explode underneath or to the side
of the vehicle to cause the maximum amount of damage; however, as
vehicle armor was improved on military
vehicles, insurgents began placing IEDs in elevated positions such
as on
road signs, utility poles, or
trees, in order to hit less protected
areas.
IEDs in Iraq may be made with
artillery or
mortar shell or with varying amounts of bulk or homemade
explosives. Early during the Iraq war, the
bulk explosives were often obtained from stored munitions bunkers
to include stripping landmines of their explosives.
Despite the increased
armor, IEDs have been
killing soldiers with greater frequency. May 2007 was the deadliest
month for IED attacks thus far with a reported 89 of the 129
Coalition casualties coming from an IED attack. According to the
Pentagon, 250,000 tons (of 650,000 tons total) of Iraqi ordnance
were looted, providing a large supply of ammunition for the
insurgents.
In
October 2005, The UK government charged that Iran
was
supplying insurgents with the technological know-how to make
shaped charges, which focus the blast
in a specific direction, and can pierce greater thicknesses of
armor with less explosive. Both Iranian and Iraqi government
officials deny this.
Types of devices
By warhead
The Dictionary of Military and Associated Terms (JCS Pub 1-02)
includes two definitions for improvised devices: improvised
explosive devices (IED), and improvised nuclear device (IND). These
definitions address the Nuclear and Explosive in CBRNE. That leaves
chemical, biological and radiological undefined. Four definitions
have been created building on the structure of the JCS definition.
Terms have been created to standardize the language of first
responders and members of the military and to correlate the
operational picture.
- Improvised explosive device: A device placed or fabricated in
an improvised manner incorporating destructive, lethal, noxious,
pyrotechnic, or incendiary chemicals and designed to destroy,
incapacitate, harass, or distract. It may incorporate military
stores, but is normally devised from non-military components.
- Improvised nuclear device: A device incorporating radioactive
materials designed to result in the dispersal of radioactive
material or in the formation of nuclear-yield reaction. Such
devices may be fabricated in a completely improvised manner or may
be an improvised modification to a nuclear weapon.
- Improvised chemical device: A device incorporating the toxic
attributes of chemical materials designed to result in the
dispersal of these toxic chemical materials for the purpose of
creating a primary patho-physiological toxic effect (morbidity
& mortality), or secondary psychological effect (causing fear
and behavior modification) on a larger population. Such devices may
be fabricated in a completely improvised manner or may be an
improvised modification to an existing weapon.
- Improvised biological device: A device incorporating biological
materials designed to result in the dispersal of vector borne
biological material for the purpose of creating a primary
patho-physiological toxic effect (morbidity & mortality), or
secondary psychological effect (causing fear and behavior
modification) on a larger population. Such devices are fabricated
in a completely improvised manner.
- Improvised radioactive device: A device incorporating
radioactive materials designed to result in the dispersal of
radioactive material for the purpose of area denial and economic
damage, &/or for the purpose of creating a primary
patho-physiological toxic effect (morbidity & mortality), or
secondary psychological effect (causing fear and behavior
modification) on a larger population. Such devices may be
fabricated in a completely improvised manner or may be an
improvised modification to an existing nuclear weapon. Also called
a Radiological Dispersion Device (RDD) or "dirty bomb".
- Improvised incendiary device: A device making use of exothermic
chemical reactions designed to result in the rapid spread of fire
for the purpose of creating a primary patho-physiological effect
(morbidity & mortality), or secondary psychological effect
(causing fear and behavior modification) on a larger population or
it may be used with the intent of gaining a tactical advantage.
Such devices may be fabricated in a completely improvised manner or
may be an improvised modification to an existing weapon. A common
type of this is the molotov
cocktail.
By delivery mechanism
Car bomb/vehicle-borne

Artillery rounds and gasoline cans
discovered in the back of a pick-up truck in Iraq
Vehicles may be laden with explosives, set to explode by remote
control or by a passenger/driver, commonly known as a
car bomb or vehicle-based IED (VBIED, pronounced
vee-bid). On occasion the driver of the car bomb may have
been coerced into delivery of the vehicle under duress, a situation
known as a
proxy bomb. Distinguishing
features are low-riding vehicles with excessive weight, vehicles
with only one passenger, and ones where the interior of the
vehicles look like they have been stripped down and built back up.
Car bombs can carry thousands of pounds of explosives and may be
augmented with
shrapnel to
increase fragmentation. The U.S. State Department has published a
guide on car bomb awareness.
Boat-borne
Boats laden with explosives can be used against ships and areas
connected to water. An early example of this type was the Japanese
Shinyo suicide boats during
World War II. The boats were laden with
explosives and attempted to ram Allied ships, sometimes
successfully, having sunk or severely damaged several American
ships by war's end.
Suicide bombers used a boat-borne IED to
attack the USS
Cole
, US and UK troops have also been killed by
boat-borne IEDs in Iraq.
Animal-borne
Monkeys and
war pigs were used as
incendiaries around 1000 AD. More famously the "
anti-tank dog" and "
bat
bomb" were developed during WW2.
In recent times, a
two-year old child and seven other people were killed by explosives
strapped to a horse in the town of Chita in Colombia
and a donkey was used in a similar fashion in
Afghanistan.
Collar bombs
IED strapped to the neck of farmers have been used on at least
three occasions by guerrillas in Colombia, as a way of extortion.
American pizza delivery man
Brian
Douglas Wells was killed in 2003 by an explosive fastened to
his neck, purportedly under duress from the maker of the
bomb.
Suicide bombers
Suicide bombing usually refers to an
individual wearing explosives and detonating them in order to kill
others including themselves, a technique pioneered by
LTTE (Tamil Tigers). The bomber will conceal explosives
on and around their person, commonly using a vest and will use a
timer or some other trigger to detonate the explosives. The logic
behind such attacks is the belief that an IED delivered by a human
has a greater chance of achieving success than any other method of
attack. In addition, there is the psychological impact of
terrorists prepared to deliberately sacrifice themselves for their
cause.Suicide bombers in Iraq are common in marketplaces and where
Iraqi army and police recruits frequent.
Platter charges
A form of IEDs being used in Iraq are platter charges, which are
rectangular or circular pieces of flat metal (usually steel)
weighing a few kilograms with plastic explosives pressed onto one
side of the platter. The amount of explosive used is usually equal,
by weight, to the weight of the platter. The explosives propel the
platter into the target with an approximate velocity of . The
effective range can be as far as 50 meters, limited by the
accuracy.
Explosively formed penetrators
IEDs have been deployed in the form of
explosively formed
penetrators, a special type of shaped charge that is effective
at long standoffs from the target (50 meters or more). These are
especially problematic to counter because they can be placed far
from their intended targets. An EFP is essentially a cylindrical
shaped charge with a concave metal disc (often copper) in front,
pointed inwards. The force of the shaped charge turns the disc into
a high velocity slug, capable of penetrating the armor of most
vehicles in Iraq. EFPs are uncommon because production requires
expert craftsmanship and a large financial cost.
By trigger mechanisms
- Command wire improvised explosive device (CWIED): An IED
utilizing and electrical firing cable which affords the user
complete control over the device right up until the moment of
initiation.
- Radio controlled improvised explosive device (RCIED): The
trigger for this IED is controlled by radio link. The device is
constructed so that the receiver is connected to an electrical
firing circuit and the transmitter operated by the perpetrator at a
distance, A signal from the transmitter causes the receiver to
trigger a firing pulse which operates the switch. Usually the
switch fires an initiator; however, the output may also be used to
remotely arm an explosive circuit. Often the transmitter and
receiver operate on a matched coding system which prevents the
RCIED from being initiated by spurious radio frequency signals. An
RCIED can be triggered from any number of different mechanisms
including car alarms, wireless door bells, cell phones, pagers and
encrypted GMRS
radios.
- Cell phone RCIED: A radio-controlled IED incorporating a cell
phone which is modified and connected to an electrical firing
circuit. Cell phones operate in the UHF band in line of sight with
base transceiver station
(BTS) antennae sites. Commonly, receipt of a paging signal by phone
is sufficient to initiate the IED firing circuit.
- Victim-operated improvised explosive device (VOIED): These are
designed to function upon contact with a victim; also known as
booby traps. VOIED switches are often well hidden from the victim
or disguised as innocuous everyday objects. They are operated by
means of movement. Switching methods include tripwire, pressure
mats, spring-loaded release, push, pull or tilt. Common forms of
VOIED include the under-vehicle IED (UVIED) and improvised
landmines.
Infrared
The British also accused Iran and
Hezbollah of teaching Iraqi fighters to use
infrared light beams to trigger IEDs. As
the occupation forces became more sophisticated in interrupting
radio signals around their convoys, the insurgents adapted their
triggering methods. In some cases, when a more advanced method was
disrupted, the insurgents regressed to using uninterruptible means,
such as hard wires from the IED to detonator; however, this method
is much harder to effectively conceal. It later emerged however,
that these so-called "advanced" IEDs were actually old
IRA technology. The infrared beam method was
perfected by the IRA in the early '90s after it acquired the
technology from a botched undercover British Army operation.
Many of
the IEDs being used against coalition forces in Iraq
were
originally developed by the British Army who unintentionally passed
the information on to the IRA.
Detection and disarmament

A U.S.
Marine in Iraq shown with a robot used for disposal of buried
devices
Since these devices are improvised, there are no specific
guidelines for
explosive ordnance
disposal (EOD) personnel to use to positively identify or
categorize them. EOD personnel are trained in the
rendering safe and disposal of IEDs.
The presence of
chemical,
biological,
radiological, or
nuclear (
CBRN) material in
an IED requires additional precautions. As with other missions, the
EOD operator provides the area commander with an assessment of the
situation and of support needed to complete the mission.
Military forces and law enforcement personnel from around the world
have developed a number of
render
safe procedures (RSP) to deal with IEDs. RSPs may be developed
as a result of direct experience with devices or by applied
research designed to counter the threat. The claimed effectiveness
of
IED jamming systems, proven
or otherwise, has caused IED technology to essentially regress to
command-wire detonation methods. These are physical connections
between the detonator and explosive device and cannot be jammed.
However, these types of IEDs are more difficult to emplace quickly,
and more readily detected.
Military
forces from India
, Canada
, United
Kingdom
, Israel
, Spain
and the
United
States
are at the forefront of counter-IED efforts, as all
have direct experience in dealing with IEDs used against them in
conflict or terrorist attacks. From the research and
development side, programs such as the new Canadian Unmanned
Systems Challenge, will bring students groups together to invent an
unmanned device to both locate IEDs and pinpoint the
insurgents.
Technological countermeasures are only part of the solution in the
effort to defeat IEDs; experience, training and awareness remain
key factors in combating them. For example, there are visual signs
that may suggest the presence of an IED, such as recently
turned-over soil or sand by a road, or an abandoned vehicle beside
a road. Recognizing these telltale signs may be as valuable as
having sophisticated detection equipment.
See also
References
External links