The Full Wiki

More info on Inventions in medieval Islam

Inventions in medieval Islam: Map

  
  

Wikipedia article:

Map showing all locations mentioned on Wikipedia article:



A significant number of inventions were developed in the medieval Islamic world, a geopolitical region that has at various times extended from Spainmarker and Africa in the west to the Indian subcontinent and Malay Archipelago in the east. The inventions listed here were developed during the medieval Islamic world, which covers the period from the early Caliphate to the later Ottoman, Safavid and Mughal empires. In particular, the majority of inventions here date back to the Islamic Golden Age, which is traditionally dated from the 8th to the 13th centuries, but has been extended to the 15th century by recent scholarship.George Saliba (1994), A History of Arabic Astronomy: Planetary Theories During the Golden Age of Islam, p. 245, 250, 256-257. New York University Press, ISBN 0814780237.

Chemical industries

Laboratory setup for steam distillation, invented by Avicenna in the 11th century.
Aqua regia was first isolated by Geber.
Hydrochloric acid, a mineral acid, was first isolated by Geber.
Nitric acid, a mineral acid, was first isolated by Geber.
Sulfuric acid, a mineral acid, was first isolated by Geber.
Arsenic, a chemical element, was first isolated by Geber in the 8th century.


Early forms of distillation were known to the Babylonians, Greeks and Egyptians since ancient times, but it was Muslim chemists who first invented pure distillation processes which could fully purify chemical substances. They also developed several different variations of distillation (such as dry distillation, destructive distillation and steam distillation) and introduced new distillation aparatus (such as the alembic, still, and retort), and invented a variety of new chemical processes and over 9,000 chemical substances.

Will Durant wrote in The Story of Civilization IV: The Age of Faith:

Robert Briffault wrote in The Making of Humanity:

Chemical processes

The following chemical processes were invented by Muslim chemists:



Chemical substances

  • Alkali, alkali salt, borax, and pure sal ammoniac: Isolated by Geber (Jabir ibn Hayyan) in the 8th century.
  • Plated mail: Invented by Geber.
  • Ethanol: Isolated by Arabic chemists.
  • Lead carbonatic: Isolated by Geber.
  • Medicinal substances: Muslim chemists discovered 2,000 medicinal substances.
  • Potassium nitrate, pure: Isolated by Hasan al-Ramah in the 1270s.
  • Rose water: First produced by Muslim chemists in the medieval Islamic world through the distillation of roses, for use in the drinking and perfumery industries.
  • Sal nitrum: Isolated by Geber.


Acids



Elements

  • Arsenic: Isolated by Geber in the 8th century.
  • Antimony: Isolated by Geber.


Food and drink

  • Confectionery: Due to advances in sugar production and the invention of sugar refineries, this led to the production of early confectioneries by the Arabs.
  • Distilled water and water purification: Purified by Muslim chemists. Al-Muwaffaq’s The Foundations of the True Properties of Remedies in the 10th century described the distillation of sea-water for drinking.
  • Pure distilled alcohol and ethanol: First isolated by Al-Kindi (Alkindus) in the 9th century. Ahmad Y Hassan wrote: "The distillation of wine and the properties of alcohol were known to Islamic chemists from the eighth century. The prohibition of wine in Islam did not mean that wine was not produced or consumed or that Arab alchemists did not subject it to their distillation processes. Jabir ibn Hayyan described a cooling technique which can be applied to the distillation of alcohol."


  • Restaurant and three-course meal: The earliest restaurants came into existence throughout the Islamic world from the 10th century, shortly before restaurants appeared in China in the 11th century. The Islamic world had "restaurants where one could purchase all sorts of prepared dishes." These restaurants were mentioned by Al-Muqaddasi (born 945) in the late 10th century. Restaurants in medieval Islamic Spainmarker served three-course meals, which was earlier introduced in the 9th century by Ziryab, who insisted that meals should be served in three separate courses consisting of soup, the main course, and dessert.
  • Rose water: See Chemical substances above.
  • Sugar refinery: See Industrial milling below.


Glass industry

  • Quartz glass and Silica glass: The production of glass from stone (including quartz) and sand, was pioneered by Abbas Ibn Firnas in the 9th century.Lynn Townsend White, Jr. (Spring, 1961). "Eilmer of Malmesbury, an Eleventh Century Aviator: A Case Study of Technological Innovation, Its Context and Tradition", Technology and Culture 2 (2), pp. 97-111 [100]:



Oil industry



Pottery

Tin-glazed Hispano-Moresque ware with lusterware decoration, from Spain circa 1475.


  • Albarello: An albarello is a type of maiolica earthenware jar originally designed to hold apothecaries' ointments and dry drugs. The development of this type of pharmacy jar had its roots in the Islamic Middle East. Brought to Italy by Hispano-Moresque traders, the earliest Italian examples were produced in Florence in the 15th century.
  • Fritware: It refers to a type of pottery which was first developed in the Near East, where production is dated to the late first millennium AD through the second millennium AD. Frit was a significant ingredient. A recipe for “fritware” dating to c. 1300 AD written by Abu’l Qasim reports that the ratio of quartz to “frit-glass” to white clay is 10:1:1. This type of pottery has also been referred to as “stonepaste” and “faience” among other names. A ninth century corpus of “proto-stonepaste” from Baghdadmarker has “relict glass fragments” in its fabric.
  • Hispano-Moresque ware: This was a style of Islamic pottery created in Islamic Spain, after the Moors had introduced two ceramic techniques to Europe: glazing with an opaque white tin-glaze, and painting in metallic lusters. Hispano-Moresque ware was distinguished from the pottery of Christendom by the Islamic character of it decoration.
  • Iznik pottery: Produced in Ottoman Turkeymarker as early as the 15th century AD. It consists of a body, slip, and glaze, where the body and glaze are “quartz-frit.” The “frits” in both cases “are unusual in that they contain lead oxide as well as soda”; the lead oxide would help reduce the thermal expansion coefficient of the ceramic. Microscopic analysis reveals that the material that has been labeled “frit” is “interstitial glass” which serves to connect the quartz particles.
  • Lusterware: Lustre glazes were applied to pottery in Mesopotamia in the 9th century; the technique soon became popular in Persia and Syriamarker. Lusterware was later produced in Egypt during the Fatimid caliphate in the 10th-12th centuries. While the production of lusterware continued in the Middle East, it spread to Europe—first to Al-Andalusmarker, notably at Malagamarker, and then to Italy, where it was used to enhance maiolica.
  • Stonepaste ceramic: Invented in 9th-century Iraq, it was a vitreous or semivitreous ceramic ware of fine texture, made primarily from non-refactory fire clay.
  • Tin-glazing: The tin-glazing of ceramics was invented by Muslim potters in 8th-century Basramarker, Iraq. Tin-opacified glazing was one of the earliest new technologies developed by the Islamic potters. The first examples of this technique can be found as blue-painted ware in 8th-century Basra.
  • Tin-glazed pottery: The earliest tin-glazed pottery appears to have been made in Iraq in the 9th century, the oldest fragments having been excavated during the First World War from the palace of Samarramarker about fifty miles north of Baghdad. From there, it spread to Egypt, Persia and Spain, before reaching Italy in the Renaissance, Holland in the 16th century, and England, France and other European countries shortly after.


Civil engineering

An illustration of patterned Girih tiles, found in Islamic architecture dating back over five centuries ago.
These featured the first quasicrystal patterns and self-similar fractal quasicrystalline tilings.


During the Muslim Agricultural Revolution, the early Muslim Arab Empire was ahead of its time regarding domestic water systems such as water cleaning systems and advanced water transportation systems resulting in better agriculture, something that helped in issues related to Islamic hygienical jurisprudence. Al-Jazari invented a variety of machines for raising water in 1206, as well as water mills and water wheels with cams on their axle used to operate automata in the late 12th century.

  • Kerosene lamp: The first kerosene lamp was invented by Muhammad ibn Zakarīya Rāzi in the 9th century.
  • Litter collection facilities: Cordobamarker had the first facilities and waste containers for litter collection.S. P. Scott (1904), History of the Moorish Empire in Europe, 3 vols, J. B. Lippincott Company, Philadelphia and London.

    F. B. Artz (1980), The Mind of the Middle Ages, Third edition revised, University of Chicago Press, pp 148-50.

    (cf. References, 1001 Inventions)
  • Surveying instruments: Muslim engineers invented a variety of surveying instruments for accurate levelling, including a wooden board with a plumb line and two hooks, an equilateral triangle with a plumb line and two hooks, and a "reed level". They also invented a rotating alidade used for accurate alignment, and a surveying astrolabe used for alignment, measuring angles, triangulation, finding the width of a river, and the distance between two points separated by an impassable obstruction.
  • Tar roads and pavements: The streets of Baghdad were the first to be paved with tar from the 8th century AD. Tar was derived from petroleum, accessed from oil fields in the region, through the chemical process of destructive distillation.
  • Ventilator: The first ventilators were invented in Islamic Egypt and were widely used in many houses throughout Cairo during the Middle Ages. These ventillators were later described in detail by Abd al-Latif al-Baghdadi in 1200, who reported that almost every house in Cairo has a ventillator, and that they cost anywhere from 1 to 500 dinars depending on their sizes and shapes. Most ventillators in the city were oriented towards the Qibla (the direction of Mecca), as was the city in general.
  • Water management technological complex: In much the same way the Neolithic 'toolkit' or 'technological complex' was central to the Neolithic Revolution, a 'water management technological complex' was similarly central to the Islamic Green Revolution and, by extension, a precondition for the emergence of modern technology. The various components of this toolkit were developed in different parts of the Afro-Eurasia landmass, both within and beyond the Islamic world. However, it was in the medieval Islamic lands where the technological complex was assembled and standardized, and subsequently diffused to the rest of the Old World. Under the rule of a single Islamic Caliphate, different regional hydraulic technologies were assembled into "an identifiable water management technological complex that was to have a global impact." The various components of this complex included canals, dams, the qanat system from Persia, regional water-lifting devices such as the noria, shaduf and screwpump from Egyptmarker, and the windmill from Afghanistanmarker.


Architecture





  • Minaret: The minaret is a distinctive architectural feature of Islamic architecture, especially mosques, dating back to the early centuries of Islam. Minarets are generally tall spires with onion-shaped crowns, usually either free standing or much taller than any surrounding support structure. The tallest minaret in pre-modern times was the Qutub Minarmarker, which was 72.5 meters (237.9 ft) tall and was built in the 12th century, and it remains the tallest brick and stone minaret in the world.
  • Prefabricated home and movable structure: The first prefabricated homes and movable structures were invented in 16th century Mughal India by Akbar the Great. These structures were reported by Arif Qandahari in 1579.


Industrial milling

A variety of industrial mills were active in the medieval Islamic world, including fulling mills, gristmills, hullers, paper mills, sawmills, stamp mills, steel mills, sugar mills, and windmills, many of which were original inventions by Muslim engineers. By the 11th century, every province throughout the Islamic world had these industrial mills in operation, from Al-Andalus and North Africa to the Middle East and Central Asia.Adam Robert Lucas (2005), "Industrial Milling in the Ancient and Medieval Worlds: A Survey of the Evidence for an Industrial Revolution in Medieval Europe", Technology and Culture 46 (1): 1-30 [10-1 & 27] These advances made it possible for many industrial operations that were previously driven by manual labour in ancient times to be driven by machinery instead in the Islamic world. The transfer of these technologies to medieval Europe later laid the foundations for the Industrial Revolution in 18th century Europe.

  • Bridge mill: The bridge mill was a unique type of watermill that was built as part of the superstructure of a bridge. The earliest record of a bridge mill is from Cordoba, Spainmarker in the 12th century.
  • Flywheel-driven noria: See Pumps below.
  • Geared and wind powered gristmills with trip hammers: The first geared gristmills were invented by Muslim engineers in the Islamic world, and were used for grinding corn and other seeds to produce meals, and many other industrial uses such as fulling cloth, husking rice, papermaking, pulping sugarcane, and crushing metallic ores before extraction. Gristmills in the Islamic world were often made from both watermills and windmills. In order to adapt water wheels for gristmilling purposes, cams were used for raising and releasing trip hammers to fall on a material. The first wind-powered gristmills driven by windmills were built in what are now Afghanistanmarker, Pakistanmarker and Iranmarker in the 9th and 10th centuries.
  • Hulling mill: Early Islamic societies made early use of watermills for hulling rice.
  • Hydropowered forge and finery forge: The first forge to be driven by a hydropowered water mill rather than manual labour, also known as a finery forge, was invented in 12th century Islamic Spain.
  • Mechanical fulling mill: The first clear references to fulling mills are reported in Persia from the 10th century. By the time of the Crusades in the 11th century, fulling mills were active throughout the Islamic world, from Islamic Spain and North Africa to Central Asia. They appear to have originated in 9th or 10th century in the Islamic world, either in the Middle East or North Africa. Mechanical fulling was subsequently disseminated into Western Europe through Islamic Spain and Italy in the 11th and 12th centuries.
  • Paper mill: Paper was introduced into the Muslim world by Chinese prisoners after the Battle of Talasmarker. Muslims made several improvements to papermaking, mainly the use of hydropower rather than manual labour to produce paper, and they built the first paper mills in Baghdad, Iraq, as early as 794. Papermaking was transformed from an art into a major industry as a result. Paper manufacturing mills were introduced to Islamic Spain in the mid-10th century and then to Christian Spain by the mid-12th century.
  • Pulp mill: Early Islamic societies made early use of watermills to prepare pulp for the papermaking process.
  • Sugar refinery: The first sugar refineries were built by Muslim engineers. They were first driven by water mills, and then windmills from the 9th and 10th centuries in Afghanistan, Pakistan, and Iran.
  • Underground watermill: Another innovation that was unique to the Islamic world includes the situation of watermills in the underground irrigation tunnels of a qanat and on the main canals of valley-floor irrigation systems.
  • Vertical-axle windmill: The first vertical-axle windmills were built in Sistan, Afghanistan, sometime between the 7th century and 9th century, as described by Muslim geographers. These were vertical axle windmills, which had long vertical driveshafts with rectangle shaped blades. The first windmill may have been constructed as early as the time of the second Rashidun caliph Umar (634-644 AD), though some argue that this account may have been a 10th century amendment. Made of six to twelve sails covered in reed matting or cloth material, these windmills were used to grind corn and draw up water, and used in the gristmilling and sugarcane industries. The first horizontal windmills were built in what are now Afghanistan, Pakistan and Iran in the 9th and 10th centuries. They had a variety of uses, such as grinding grain, pumping water, and crushing sugar-cane. A small wind wheel operating an organ is described as early as the 1st century AD by Hero of Alexandria, marking the earliest known instance of a wind powering machine in history. Horizontal axle windmills of the type generally used today were developed in Northwestern Europe in the 1180s.


Cosmetics

A number of hygienic cosmetics were invented by Muslim chemists, cosmetologists and physicians.

  • Cosmetic dentistry and tooth bleaching: In his Al-Tasrif (c. 1000), Abulcasis described methods for strengthening the gums and introduced the method of tooth bleaching using tooth whiteners.
  • Beauty parlour and cosmetology school: In the 9th century, Ziryab opened the first beauty parlour and "cosmetology school" for women near Alcázar, Al-Andalus."
  • Chemical depilatory for hair removal: In the 9th century, Ziryab taught women in Al-Andalus "the shaping of eyebrows and the use of depilatories for removing body hair".
  • Hair care and hair dye: In his Al-Tasrif (c. 1000), Abulcasis first described hair dyes for changing human hair color to blond or black hair, and hair care for correcting kinky or curly hair. Dyestuff was also created by earlier Muslim chemists.
  • Lipstick, solid: In 1000 CE, the Andalusian Arab cosmetologist Abu al-Qasim al-Zahrawi (Abulcasis) invented solid lipsticks, which were perfumed stocks rolled and pressed in special molds, and he described them in his Al-Tasrif.
  • Pomade: Produced by Arabs.


Hygiene

  • Hand cream and lotion, and suntan lotion: In his Al-Tasrif (c. 1000), Abulcasis described the first hand creams and lotions, and the first early suntan lotions, describing their ingredients and benefits in depth.
  • Modern soap: The soap now used in modern times is made of vegetable oils (such as olive oil) with sodium hydroxide and aromatics (such as thyme oil). This formula was invented by Muslim chemists, and differed from the earlier soap-like detergents used in ancient times. Sodium lye (al-soda al-kawia), perfumed and colored soaps, and liquid and solid soaps, were also produced by Muslim chemists.
  • Soap bar: The first hard soap bars were produced by Muslim chemists. They gave recipes for soaps made from sesame oil, potash, alkali, lime, and molds, leaving hard soap.
  • Toothpaste, functional and pleasant: In the 9th century, the Persian musician and fashion designer Ziryab is known to have invented a type of toothpaste, which he popularized throughout Islamic Spain. The exact ingredients of this toothpaste are not currently known, but unlike the earlier Egyptian and Roman toothpastes, Ziryab's toothpaste was reported to have been both "functional and pleasant to taste." In circa 1000, Abulcasis recommended a toothpaste made from cinnamon, nutmeg, cardamom and coriander leaves, as a remedy for bad breath resulting from eating garlic or onions.


Perfumery

Perfume usage was recorded in the Arabian Peninsula since the 7th century, and Muslims made many advances in perfumery in the proceeding centuries. This included the extraction of numerous fragrances, as well as the cheap mass-production of incenses. Muslim scientists such as Al-Kindi elaborated a vast number of recipes for a wide range of perfumes, cosmetics and pharmaceuticals.

  • Perfume industry: Established by Geber (Jabir) (b. 722, Iraq) and Al-Kindi (b. 801, Iraq). Jabir developed many techniques, including distillation, evaporation and filtration, which enabled the collection of the odour of plants into a vapour that could be collected in the form of water or oil. Al-Kindi carried out extensive research and experiments in combining various plants and other sources to produce a variety of scent products.
  • Camphor: In the 9th century, the Arab chemist Al-Kindi (Alkindus) provided the earliest recipe for the production of camphor in his Kitab Kimiya' al-'Itr (Book of the Chemistry of Perfume).
  • Deodorants, under-arm and roll-on: In the 9th century, Ziryab invented under-arm deodorants in Al-Andalus. In circa 1000, another under-arm deodorant was described in Al-Andalus by Abulcasis, who also invented perfumed stocks, rolled and pressed in special moulds, similar to modern roll-on deodorants.
  • Extraction of fragrances through steam distillation: Introduced by Abū Alī ibn Sīnā (Avicenna) in the 11th century.
  • Ghaliya: The preparation of a perfume called ghaliya, which contained musk, amber and other ingredients, and the use of various drugs and apparatus], was produced by al-Kindi.
  • Musk and floral perfumes: Produced in the 11th-12th centuries in the Arabian Peninsula.
  • Jasmine and citrus perfumes: Muslims introduced new raw ingredients in perfumery, which were produced from different spices, herbals, and other fragrance materials, which are still used in modern perfumery. These included jasmine from South and Southeast Asia, and citrus fruits from East Asia.
  • Rose water: See Chemical substances above.


Institutions

A number of important economic, educational, legal and scientific institutions previously unknown in the ancient world have their origins in the medieval Islamic world.

  • Academic degree-granting university: If the definition of a university is assumed to mean an institution of higher education and research which issues academic degrees at all levels (bachelor, master and doctorate) as in the modern sense of the word, then the medieval Madrasahs known as Jami'ah ("university" in Arabic) founded in the 9th century would be the first examples of such an institution. The University of Al Karaouinemarker in Fez, Moroccomarker is thus recognized by the Guinness Book of World Records as the oldest degree-granting university in the world with its founding in 859 by Fatima al-Fihri. Also in the 9th century, Bimaristan medical schools were founded in the medieval Islamic world, where medical degrees and diplomas were issued to students of Islamic medicine who were qualified to be a practicing Doctor of Medicine. Al-Azhar Universitymarker, founded in Cairo, Egypt in 975, was a Jami'ah university which offered a variety of post-graduate degrees (Ijazah), and had individual faculties for a theological seminary, Islamic law and jurisprudence, Arabic grammar, Islamic astronomy, early Islamic philosophy, and logic in Islamic philosophy. The modern academic robe worn by graduates was also adapted from the robe worn by the Alim (alumni).
  • Agency and Aval: The first agencies were the Hawala, mentioned in texts of Islamic jurisprudence as early as the 8th century. Hawala itself later influenced the development of the agency in common law and in civil laws such as the Aval in French law and the Avallo in Italian law. The words Aval and Avallo were themselves derived from Hawala. The transfer of debt, which was "not permissible under Roman law but became widely practiced in medieval Europe, especially in commercial transactions", was due to the large extent of the "trade conducted by the Italian cities with the Muslim world in the Middle Ages." The agency was also "an institution unknown to Roman law" as no "individual could conclude a binding contract on behalf of another as his agent." In Roman law, the "contractor himself was considered the party to the contract and it took a second contract between the person who acted on behalf of a principal and the latter in order to transfer the rights and the obligations deriving from the contract to him." On the other hand, Islamic law and the later common law "had no difficulty in accepting agency as one of its institutions in the field of contracts and of obligations in general."
  • Assize of novel disseisin and contract protected by the action of debt: According to Professor John Makdisi, the "royal English contract protected by the action of debt" has origins in "the Islamic Aqd", and "the English assize of novel disseisin" has origins in "the Islamic Istihqaq", in classical Maliki jurisprudence.
  • College: The origins of the college lie in the medieval Islamic world. The madrasah was a medieval Islamic college of law and theology, usually affiliated with a mosque, and was funded by early charitable trusts known as Waqf, the origins of the trust law.
  • Jury and jury trial: The closest predecessor to the English jury trial was the Lafif in the Maliki school of classical Islamic law and jurisprudence, which was developed between the 8th and 11th centuries. Like the English jury, the Islamic Lafif was a body of twelve members drawn from the neighborhood and sworn to tell the truth, who were bound to give a unanimous verdict, about matters "which they had personally seen or heard, binding on the judge, to settle the truth concerning facts in a case, between ordinary people, and obtained as of right by the plaintiff." According to John Makdisi, "no other institution in any legal institution studied to date shares all of these characteristics with the English jury."


The first observatories to serve as research institutes were built by Muslim astronomers.
The most famous was the Maragheh observatory, the current status of which is pictured here.


  • Observatory as a research institute: As opposed to a private observation post as was the case in ancient times, the astronomical observatories in the Islamic world were the first true observatories, in the sense that they functioned as early research institutes, like modern observatories. The Islamic observatory was the first specialized astronomical institution with its own scientific staff, director, astronomical program, large astronomical instruments, and building where astronomical research and observations are carried out. Islamic observatories were also the first to employ enormously large astronomical instruments in order to improve the accuracy of their observations. Famous examples include the observatories at Baghdad and Ray, Iranmarker, the Maragheh observatorymarker, Ulugh Beg's observatory at Samarqandmarker, and the Istanbul observatory of al-Din.
  • Public library and lending library: A number of distinct features of the modern library were introduced in the Islamic world, where libraries not only served as a collection of manuscripts as was the case in ancient libraries, but also as a public library and lending library, a centre for the instruction and spread of sciences and ideas, a place for meetings and discussions, and sometimes as a lodging for scholars or boarding school for pupils. The concept of the library catalogue was also introduced in medieval Islamic libraries, where books were organized into specific genres and categories.
  • Restaurant: See Food and drink above.
  • Trust institution and charitable trust: The Waqf in Islamic law, which developed in the Islamic world from the 7th to 9th centuries, were the first charitable trust. Every waqf was required to have a waqif (founder), mutawillis (trustee), qadi (judge) and beneficiaries. Under both a waqf and a trust, "property is reserved, and its usufruct appropriated, for the benefit of specific individuals, or for a general charitable purpose; the corpus becomes inalienable; estates for life in favor of successive beneficiaries can be created" and "without regard to the law of inheritance or the rights of the heirs; and continuity is secured by the successive appointment of trustees or mutawillis."


Medical institutions

  • Apothecary, Drugstore, and Pharmacy: The first drugstores and pharmacies were opened by Muslim pharmacists in Baghdad in 754, while the first apothecary shops were also founded by Muslim practitioners at the time.
  • Medical school: The Islamic Bimaristans were not only hospitals, but also the first medical schools and universities to issue diplomas. The first of these institutions was opened in Baghdad during the time of Harun al-Rashid. They then appeared in Egypt from 872 and then in Islamic Spain, Persia and the Maghreb thereafter. Physicians and surgeons at Islamic hospital-universities gave lectures to medical students and diplomas were issued to students who completed their education and were qualified to be doctors of medicine.
  • Psychiatric hospital: The first psychiatric hospitals were built in the medieval Islamic world. The first of these were built built in Baghdad in 705, Fes in the early 8th century, and Cairo in 800.
  • Public hospital: The Islamic Bimaristans were the first free public hospitals, and replaced the healing templesmarker and sleep templesmarker found in ancient times. They were hospital in the modern sense, an establishment where the ill were welcomed and cared for by qualified staff. In this way, Muslim physicians were the first to make a distinction between a hospital and other different forms of sleep and healing temples, hospices, asylums, lazarets and leper-houses, all of which in ancient times were more concerned with isolating the sick and the mad from society "rather than to offer them any way to a true cure." The medieval Bimaristan hospitals are thus considered "the first hospitals" in the modern sense of the word.
  • Quarantine: The discovery of the contagious nature of infectious diseases and the use of quarantine to limit the spread of contagious diseases was introduced by Avicenna in The Canon of Medicine (1025).
  • Geriatric medicine: Arabs were the first to write books on Geriatric medicine.


Mechanical technology

Al-Jazari's candle clock employed a bayonet fitting for the first time in 1206.
Diagram of a hydropowered water-raising machine from The Book of Knowledge of Ingenious Mechanical Devices by Al-Jazari in 1206.
The double-action reciprocating suction piston pump with a valve and crankshaft-connecting rod mechanism, from a manuscript of Al-Jazari.
The programmable humanoid robot band of Al-Jazari.
An artist rendition based on a description of a programmable humanoid robot band described to be designed by Al-Jazari in 1206.
The hand washing automaton with a flush mechanism designed by Al-Jazari in 1206.


  • Artificial thunder, lightning and weather simulation: Abbas Ibn Firnas invented an artificial weather simulation room, in which spectators saw stars and clouds, and were astonished by artificial thunder and lightning, which were produced by mechanisms hidden in his basement laboratory.
  • Bayonet fitting: Al-Jazari's candle clock in 1206 employed, for the first time, a bayonet fitting, a fastener mechanism still used in modern times.
  • Camshaft: An early cam was built into Hellenistic water-driven automata from the 3rd century BC. The first known use of a camshaft dates back to Al-Jazari in 1206. His camshaft was attached to a water wheel and was used to operate levers moving robotic musicians in his castle clock (see Analog computers below).
  • Bolted lock, and mechanical controls: According to Donald Routledge Hill, Al-Jazari first described several early mechanical controls, including "a large metal door...and a lock with four bolts."
  • Complex segmental and epicyclic gearing: Segmental gears ("a piece for receiving or communicating reciprocating motion from or to a cogwheel, consisting of a sector of a circular gear, or ring, having cogs on the periphery, or face.") and epicyclic gears were both first invented by the 11th century Arab engineer Ibn Khalaf al-Muradi from Islamic Spain. He employed both these types of gears in the gear trains of his mechanical clocks. Simple gears have been known before him, but this was the the first known case of complex gears used to transmit high torque. Segmental gears were also later employed by Al-Jazari in 1206. Professor Lynn Townsend White, Jr. wrote: "Segmental gears first clearly appear in Al-Jazari, in the West they emerge in Giovanni de Dondi's astronomical clock finished in 1364, and only with the great Sienese engineer Francesco di Giorgio (1501) did they enter the general vocabulary of European machine design."
  • Crankshaft: The crank mechanism was previously known in Han China and to the Banu Musa brothers, while the crank-connecting rod mechanism was known in Roman Asia. Centuries later in 1206, Al-Jazari invented the crankshaft, which he incorporated with a crank-connecting rod mechanism in his twin-cylinder pump. Like the modern crankshaft, Al-Jazari's mechanism consisted of a wheel setting several crank pins into motion, with the wheel's motion being circular and the pins moving back-and-forth in a straight line. Al-Jazari's invention of the crankshaft is considered an important mechanical invention, as it transforms continuous rotary motion into a linear reciprocating motion, and is central to much of the machinery in the modern world, including the internal combustion engine and steam engine. He employed it in two of his water raising machines.
  • Design and construction methods: According to Donald Routledge Hill, "We see for the first time in Al-Jazari's work several concepts important for both design and construction: the lamination of timber to minimize warping, the static balancing of wheels, the use of wooden templates (a kind of pattern), the use of paper models to establish designs, the calibration of orifices, the grinding of the seats and plugs of valves together with emery powder to obtain a watertight fit, and the casting of metals in closed mold boxes with sand."
  • Escapement mechanism in rotating wheel: Al-Jazari invented a method for controlling the speed of rotation of a wheel using an escapement mechanism in 1206.
  • Foot pedal and pedal-operated loom: The foot pedal was originally invented for the purpose of operating a loom, for use in weaving. The first such devices appeared in Syriamarker, Iranmarker and Islamic parts of East Africa, where "the operator sat with his feet in a pit below a fairly low-slung loom." By 1177, it was further developed in Islamic Spainmarker, where having the mechanism was "raised higher above the ground on a more substantial frame." This type of loom spread to the Christian parts of Spainmarker and soon became popular all over medieval Europe.
  • Fountain pen: The earliest historical record of a reservoir fountain pen dates back to the 10th century. In 953, Al-Muizz Lideenillah, the caliph of Egypt, demanded a pen which would not stain his hands or clothes, and was provided with a pen which held ink in a reservoir and delivered it to the nib via gravity and capillary action. As recorded by Qadi al-Nu'man al-Tamimi (d. 974) in his Kitdb al-Majalis wa 'l-musayardt, al-Mu’izz instructed and commissioned the construction of a fountain reservoir pen.
  • Gate operator: The first automatic doors were created by Hero of Alexandria and Chinese engineers under Emperor Yang of Sui prior to Islam. This was followed by the first hydraulics-powered automatic gate operators, invented by Al-Jazari in 1206. Al-Jazari also created automatic doors as part of one of his elaborate water clocks.
  • Intermittent working: The concept of minimizing intermittent working is first implied in one of al-Jazari's saqiya chain pumps, which was for the purpose of maximising the efficiency of the saqiya chain pump.Donald Routledge Hill, "Engineering", p. 776, in Roshdi Rashed, ed., Encyclopedia of the History of Arabic Science, Vol. 2, pp. 751-795, Routledge, London and New York
  • Metal block printing and printed amulet: Printing was known as tarsh in Arabic. After woodblock printing appeared in the Islamic world, which may have been adopted from China, a unique type of block printing was invented in Islamic Egypt during the 9th-10th centuries: print blocks made from metals such as tin, lead and cast iron, as well as stone, glass and clay. The first printed amulets were invented in the Islamic world, and were printed with Arabic calligraphy using metal block printing. This technique, however, appears to have had very little influence outside of the Muslim world, since metal and other non-wooden forms of block printing were unknown in China or Korea, which later developed metal movable type printing instead. Block printing later went out of use in Islamic Central Asia after movable type printing was introduced from China at least 100 years ago.
  • Metronome: According to Lynn Townsend White, Jr., the Andalusian polymath Abbas Ibn Firnas was the inventor of an early metronome in the 9th century.
  • On/off switch: The on/off switch, an important feedback control principle, was invented by Muslim engineers between the 9th and 12th centuries, and it was employed in a variety of automata and water clocks. The mechanism later had an influence on the development of the electric on/off switch which appeared in the 1950s.
  • Spinning wheel: The earliest clear illustrations of the spinning wheel come from Baghdadmarker (drawn in 1237), and then from Chinamarker (c. 1270) and Europe (c. 1280). There is evidence that spinning wheels had already come into use in the Islamic world long before that, as can be seen in an Islamic description of the spinning wheel dating from before 1030, while the earliest Chinese description dates from around 1090.
  • Steam turbine, impulse: In the 1st century, Hero of Alexandria's aeolipile may have possibly been a reaction steam turbine, but it was essentially a toy with no practical applications. In 1551, Taqi al-Din invented the first impulse steam turbine and described the first practical applications for it as a prime mover for rotating a spit, predating Giovanni Branca's later impulse steam turbine from 1629. Al-Din described his invention in his book, Al-Turuq al-saniyya fi al-alat al-ruhaniyya (The Sublime Methods of Spiritual Machines), completed in 1551 AD (959 AH).


In the 9th century, the Banū Mūsā brothers invented a number of automata (automatic machines) and mechanical devices, and they described a hundred such devices in their Book of Ingenious Devices. Some of their original inventions include:



In 1206, Al-Jazari also described over fifty mechanical devices in six different categories in The Book of Knowledge of Ingenious Mechanical Devices, most of which he invented himself, along with construction drawings. Along with his other mechanical inventions described above, some of the other mechanical devices he first described include: phlebotomy measures, linkage, water level, and devices able to elevate water from shallow wells or flowing rivers.

Automata

Mark E. Rosheim summarizes the advances in robotics made by Arab engineers as follows:

  • Programmable automatic flute player: The Banū Mūsā invented an automatic flute player which appears to have been the first programmable machine, and which they described in their Book of Ingenious Devices.
  • Programmable analog computer: See Analog computers below.
  • Programmable humanoid robot band: Al-Jazari (1136-1206) created the first recorded designs of a programmable humanoid robot in 1206, as opposed to the non-programmable automata in ancient times. Al-Jazari's robot was originally a boat with four automatic musicians that floated on a lake to entertain guests at royal drinking parties. His mechanism had a programmable drum machine with pegs (cams) that bump into little levers that operate the percussion. The drummer could be made to play different rhythms and different drum patterns if the pegs were moved around. According to Charles B. Fowler, the automata were a "robot band" which performed "more than fifty facial and body actions during each musical selection."
  • Hand washing automaton with flush mechanism: Al-Jazari invented a hand washing automaton first employing the flush mechanism now used in modern flush toilets. It features a female humanoid automaton standing by a basin filled with water. When the user pulls the lever, the water drains and the female automaton refills the basin.
  • Peacock fountain with automated humanoid servants: Al-Jazari's "peacock fountain" was a sophisticated hand washing device featuring humanoid automata as servants which offer soap and towels. Mark E. Rosheim describes it as follows: "Pulling a plug on the peacock's tail releases water out of the beak; as the dirty water from the basin fills the hollow base a float rises and actuates a linkage which makes a servant figure appear from behind a door under the peacock and offer soap. When more water is used, a second float at a higher level trips and causes the appearance of a second servant figure — with a towel!"
  • Wind powered statue: The first wind-powered automata in history were the wind-powered statues invented by the Abbasids in the mid-8th century. The statues "turned with the wind over the domes of the four gates and the palace complex of the Round City of Baghdadmarker". The "Green Dome of the palace was surmounted by the statue of a horseman carrying a lance that was believed to point toward the enemy. This public spectacle of wind-powered statues had its private counterpart in the 'Abbasid palaces where automata of various types were predominantly displayed."


Pumps

  • Crankshaft-driven and hydropowered saqiya chain pumps: The first known use of a crankshaft in a chain pump was in one of Al-Jazari's saqiya machines described in 1206. Al-Jazari also constructed a water-raising saqiya chain pump which was run by hydropower rather than manual labour, though the Chinese were also using hydropower for other chain pumps prior to him. Saqiya machines like the ones he described have been supplying water in Damascus since the 13th century up until modern times, and were in everyday use throughout the medieval Islamic world.


  • Crankshaft-driven screw and screwpump: In ancient times, the screw and screwpump were driven by a treadwheel, but from the 12th and 13th centuries, Muslim engineers operated them using the crankshaft.
  • Double-action piston suction pump with reciprocating motion: In 1206, al-Jazari demonstrates the first suction pipes and suction piston pump, the first use of double-action, and one of the earliest valve operations, when he invented a twin-cylinder double-action reciprocating suction piston pump, which seems to have had a direct significance in the development of modern engineering. This pump is driven by a water wheel, which drives, through a system of gears, an oscillating slot-rod to which the rods of two pistons are attached. The pistons work in horizontally opposed cylinders, each provided with valve-operated suction and delivery pipes. The delivery pipes are joined above the centre of the machine to form a single outlet into the irrigation system. This pump is remarkable for being the earliest known use of a true suction pipe in a pump.
  • Flywheel-driven chain pump and noria: A flywheel is used to smooth out the delivery of power from a driving device to a driven machine. The mechanical flywheel was first invented by Ibn Bassal (fl. 1038-1075) of Islamic Spain, who pioneered the use of the flywheel in the chain pump (saqiya) and noria.
  • Six-cylinder 'Monobloc' pump: In 1559, Taqi al-Din invented a six-cylinder 'Monobloc' pump. It was a hydropowered water-raising machine incorporating valves, suction and delivery pipes, piston rods with lead weights, trip levers with pin joints, and cams on the axle of a water-driven scoop-wheel.
  • Weight-driven pump: Most ancient and medieval pumps were either driven by manual labour or hydraulics. The first weight-driven pump was described as part of a perpetual motion water-raising machine in a medieval Arabic manuscript written some time after Al-Jazari. It featured a mercury-powered clockwork escapement mechanism and had two out gear-wheels driven by lead weights which mesh with a large central gear-wheel.


Medical products

Drugs and medications

Muslim physicians pioneered a number of drugs and medications for use in medicine, including:

  • Alcohol as an antiseptic: The application of pure alcohol to wounds as an antiseptic agent, and the use of alcohol as a solvent and antiseptic, was introduced by Muslim physicians and surgeons in the 10th century.
  • Cancer therapy, pharmacotherapy, and Hindiba: Avicenna's The Canon of Medicine (1025) attempted the earliest known treatments for cancer. One method he discovered was the "Hindiba", a herbal compound drug which Ibn al-Baitar later identified as having "anticancer" properties and which could also treat other tumors and neoplastic disorders. Avicenna wrote a separate supplement treatise dedicated to the pharmacotherapy of Hindiba, giving details on the drug's properties and uses, and he then gives instructions on its preparation as medication. After recognizing its usefulness in treating neoplastic disorders, Hindiba was patented in 1997 by Nil Sari, Hanzade Dogan and John K. Snyder.
  • Chemotherapeutic drugs: Pioneered by Muhammad ibn Zakarīya Rāzi (Rhazes), who introduced the use of chemical substances such as vitriol, copper, mercuric and arsenic salts, sal ammoniac, gold scoria, chalk, clay, coral, pearl, tar, bitumen and alcohol for medical purposes.
  • Clinical pharmacology, clinical trial, randomized controlled trial, and efficacy test: The origins of clinical pharmacology date back to Avicenna's The Canon of Medicine in 1025. His emphasis on tested medicines laid the foundations for an experimental approach to pharmacology. The Canon laid out the rules and principles for testing the effectiveness of new drugs and medications, which still form the basis of clinical pharmacologyD. Craig Brater and Walter J. Daly (2000), "Clinical pharmacology in the Middle Ages: Principles that presage the 21st century", Clinical Pharmacology & Therapeutics 67 (5): 447-450 [448] and modern clinical trials, randomized controlled trials and efficacy tests.D. Craig Brater and Walter J. Daly (2000), "Clinical pharmacology in the Middle Ages: Principles that presage the 21st century", Clinical Pharmacology & Therapeutics 67 (5), p. 447-450 [449].
  • Cough medicine and syrup: The use of syrups for treating coughs originates from medieval Arabic physicians.
  • Drugs, foods, herbs, plants and chemical substances: In antiquity, Dioscorides listed about 500 plants in the 1st century. Muslim botanists, chemists and pharmacists discovered many more during the Middle Ages. For example, Al-Dinawari described more than 637 plant drugs in the 9th century, , in and Ibn al-Baitar described at least 1,400 different plants, foods and drugs, 300 of which were his own original discoveries, in the 13th century. In total, at least 2,000 medicinal substances were discovered by Muslim botanists, chemists and pharmacists.
  • Epilepsy and seizure medications: Abulcasis, in his Al-Tasrif (c. 1000), invented medications called Ghawali and Lafayfe for the treatment of epilepsy and seizure.
  • Medicinal-grade alcohol: Produced through distillation. These distillation devices for use in chemistry and medicine were manufactured on a large scale in the 10th century.
  • Parasitology: Parasites were first discovered by Ibn Zuhr (Avenzoar), when he discovered the cause of scabies. He recommended specific substances to destroy microbes, and the application of sulfur topically specifically to kill the scabies mite.
  • Pharmacopoeia: The first pharmacopoeia books were written by Muslim physicians. These included Avicenna's The Canon of Medicine and other pharmacopoeia books by Abu-Rayhan Biruni in the early 11th century, Ibn Zuhr (Avenzoar) in the 12th century (and printed in 1491), and Ibn al-Baitar in the 14th century.
  • Phytotherapy, Taxus baccata, and calcium channel blocker: Avicenna's The Canon of Medicine introduced the medicinal use of Taxus baccata L. He named this herbal drug "Zarnab" and used it as a cardiac remedy. This was the first known use of a calcium channel blocker drug, which were not used in the Western world until the 1960s.


  • Sexual dysfunction and erectile dysfunction drugs: Muslim physicians identified the issue of sexual and erectile dysfunction, and they were the first to prescribe medication for the treatment of the problem. They developed several methods of therapy for this issue, including the single drug method where a drug is prescribed, and a "combination method of either a drug or food." These drugs were also occasionally used for recreational drug use to improve male sexuality in general by those who did not suffer from sexual dysfunctions. Most of these drugs were oral medication, though a few patients were also treated through topical and transurethral means. Sexual dysfunctions were being treated with tested drugs in the Islamic world since the 9th century until the 16th century by a number of Muslim physicians and pharmacists, including al-Razi, Thabit bin Qurra, Ibn Al-Jazzar, Avicenna (The Canon of Medicine), Averroes, Ibn al-Baitar, and Ibn al-Nafis (The Comprehensive Book on Medicine).
  • Topical cream: For the relief and treatment of common colds, Abulcasis invented Muthallaathat, which was prepared from camphor, musk and honey, similar to the modern Vicks Vapour Rub.


Surgical instruments

A wide variety of surgical instruments and techniques were invented in the Muslim world, as well as the refinement of earlier instruments and techniques. In particular, over 200 surgical instruments were listed by Abu al-Qasim al-Zahrawi (Abulcasis) in the Al-Tasrif (1000), many of which were never used before by any previous surgeons. Hamidan, for example, listed at least twenty six innovative surgical instruments that Abulcasis introduced.

  • Adhesive bandage and plaster: Introduced by Abulcasis.
  • Bone saw: Invented by Abulcasis.
  • Cancer surgery: Another method for treating cancer first described by Avicenna's The Canon of Medicine was a surgical treatment. He stated that the excision should be radical and that all diseased tissue should be removed, which included the use of amputation or the removal of veins running in the direction of the tumor. He also recommended the use of cauterization for the area being treated if necessary.
  • Cataract extraction, hypodermic needle, injection syringe, and suction: In circa 1000, the Muslim ophthalmologist Ammar ibn Ali of Mosulmarker was the first to successfully extract cataracts. He invented a hollow metallic syringe hypodermic needle, which he applied through the sclerotic and successfully extracted the cataracts through suction.
  • Catgut, use of: The use of catgut for internal stitching was introduced by Abulcasis.
  • Cotton dressing and bandage: The earliest known use of cotton (derived from the Arabic word qutn) as a dressing for controlling hemorrhage, was described by Abulcasis.
  • Curette, retractor, sound, surgical spoon, surgical hook, and surgical rod: Invented by Abulcasis in his Al-Tasrif (1000).
  • Fetus extraction: Abulcasis, in his Al-Tasrif (1000), first described the surgical procedure of extractiing a dead fetus using forceps.
  • General anaesthesia, general anaesthetic, oral anesthesia, inhalational anaesthetic, and narcotic-soaked sponge: Surgeries under inhalant anesthesia with the use of narcotic-soaked sponges which were placed over the face, were introduced by the Muslim anesthesiologists, Abu al-Qasim (Abulcasis) and Ibn Zuhr, in Islamic Spain. Sigrid Hunke wrote: "The science of medicine has gained a great and extremely important discovery and that is the use of general anaesthetics for surgical operations, and how unique, efficient, and merciful for those who tried it the Muslim anaesthetic was. It was quite different from the drinks the Indians, Romans and Greeks were forcing their patients to have for relief of pain. There had been some allegations to credit this discovery to an Italian or to an Alexandrian, but the truth is and history proves that, the art of using the anaesthetic sponge is a pure Muslim technique, which was not known before. The sponge used to be dipped and left in a mixture prepared from cannabis, opium, hyoscyamus and a plant called Zoan."
  • Illustrated surgical atlas: Şerafeddin Sabuncuoğlu's Cerrahiyyetu'l-Haniyye (Imperial Surgery), produced in the 15th century, was the first surgical atlas. Surgical operations were illustrated for the first time in the Cerrahiyyetu'l-Haniyye.
  • Ligature: Introduced by Abulcasis in the Al-Tasrif, for the blood control of arteries in lieu of cauterization.
  • Surgical suture: Abulcasis in his Al-Tasrif.
  • Tracheotomy, correct description of: While tracheostomy may have possibly been portrayed on ancient Egyptian tablets, the first clear and correct description of the tracheotomy operation for suffocating patients was described by Ibn Zuhr (Avenzoar) in the 12th century.


Military



Defense

  • Adarga: A hard leather shield used originally by the Moors of Islamic Spain. The adarga was a traditional defense employed by the Moorish light horseman who used it along with the lance. Throughout the 14th and 15th centuries the adarga was also used by Spanish Christian soldiers including their own light cavalry (la jineta) some of whom adopted Moorish fighting patterns. The adarga was in widespread use until the 16th century and the progress of firearms.
  • Camail: It was used as part of the mighfar, an Islamic helmet. It was in use from the 8th to the 14th century.
  • Defensive trench: A military innovation developed by early Muslims during the Battle of the Trench in 627, when the Meccansmarker invaded Medinamarker. The idea was suggested by Salman the Persian to the commander Muhammad, who then ordered the digging of a wide trench around Medina to halt their invasion. The battle resulted in the withdrawal of the Meccan army and a victory for Medina.
  • Fireproof clothing: In 1260, Egyptian Mamluk soldiers at the Battle of Ain Jalut wore fireproof clothing to protect themselves from gunpowder fires as well as chemicals in gunpowder warfare. Their clothing consisted of a silk tunic (still worn by Formula 1 drivers underneath their Nomex fire suits), aketon (from the Arabic al-qutn "the cotton"), and mainly a woolen overtunic that protects against fires and chemical weapons, similar to the clothing worn by modern soldiers for protection against biological, chemical and nuclear weapons. Due to the effectiveness of their fireproof clothing, the Egyptian soldiers were able to attach gunpowder cartridges and incendiary devices to their clothing. ( Part 4 and Part 5)
  • Mail-and-plate armour: In Kitab al-Durra al-Maknuna (The Book of the Hidden Pearl) written in the 8th century by Geber, he describes the production of mail-and-plate armours (jawasin), helmets (bid) and shields (daraq).
  • Short-hemmed and short-sleeved hauberk: The short-hemmed, short-sleeved hauberk is thought to be of Islamic origin. It was usually worn with a mail.
  • Steel helmet: An early Mamluk steel helmet from the 13th century has been preserved. It was worn by Sultan Mohammad en-Nasser ibn Qalaoun (died 1290).
  • Turban helmet: A type of helmet worn over turbans. The earliest evidence for it dates back to the 15th century, to Farrukh Yassar and the Ottoman Sultan Bayzid.


Gunpowder technology

  • Abus gun and Howitzer: The Abus gun was an early form of howitzer created by the Ottoman Empire. Abus guns were a significant part of the Ottoman Empire's artillery, and could perhaps even be referred to as the signature piece of artillery during the height of their power, in the 16th and 17th centuries, for no other civilization used a gun quite like this gun up until this time.
  • Autocannon and multi-barrel gun: Fathullah Shirazi (c. 1582), a Persian-Indian polymath and mechanical engineer who worked for Akbar the Great in the Mughal Empire, invented the autocannon, the earliest multi-shot gun. As opposed to the polybolos and repeating crossbows used earlier in ancient Greece and Chinamarker, respectively, Shirazi's rapid-firing gun had multiple gun barrels that fired hand cannons loaded with gunpowder.
  • Explosive gunpowder: The ideal composition for explosive gunpowder used in modern times is 75% potassium nitrate (saltpetre), 10% sulfur, and 15% carbon. Several almost identical compositions were first described by the Arab engineer Hasan al-Rammah as a recipe for the rockets (tayyar) he described in The Book of Military Horsemanship and Ingenious War Devices in 1270. Several examples include a tayyar "rocket" (75% saltpetre, 8% sulfur, 15% carbon) and the tayyar buruq "lightning rocket" (74% saltpetre, 10% sulfur, 15% carbon). He also states recipes for fireworks and firecrackers made from these explosive gunpowder compositions. He states in his book that many of these recipes were known to his father and grandfather, hence dating back to at least the late 12th century. Compositions for an explosive gunpowder effect were not known in China or Europe until the 14th century. Medieval French reports suggest that Muslim armies also used explosives against the Sixth Crusade army led by Ludwig IV, Landgrave of Thuringia in the 13th century.
  • Gunpowder cartridge: Gunpowder cartridges were employed by the Egyptian Mamluks, for use in their fire lances and hand cannons against the Mongols at the Battle of Ain Jalut in 1260.
  • Hand cannon, handgun, and small arms: The first portable hand cannons (midfa) loaded with explosive gunpowder, the first example of a handgun and portable firearm, were used by the Egyptians to repel the Mongols at the Battle of Ain Jalut in 1260, and again in 1304. The gunpowder compositions used for the cannons at these battles were later described in several manuscripts in the early 14th century. According to Shams al-Din Muhammad (d. 1327), the cannons had an explosive gunpowder composition (74% saltpetre, 11% sulfur, 15% carbon) almost identical to the ideal compositions for explosive gunpowder used in modern times (75% saltpetre, 10% sulfur, 15% carbon).
  • Iron-cased and metal-cylinder rocket artillery: The first iron-cased and metal-cylinder rocket artillery were developed by Tipu Sultan, a Muslim ruler of the South Indian Kingdom of Mysore, and his father Hyder Ali, in the 1780s. He successfully used these metal-cylinder rockets against the larger forces of the British East India Company during the Anglo-Mysore Wars. The Mysoremarker rockets of this period were much more advanced than what the British had seen, chiefly because of the use of iron tubes for holding the propellant; this enabled higher thrust and longer range for the missile (up to 2 km range). After Tipu's eventual defeat in the Fourth Anglo-Mysore War and the capture of the Mysore iron rockets, they were influential in British rocket development, inspiring the Congreve rocket, which was soon put into use in the Napoleonic Wars. According to Stephen Oliver Fought and John F. Guilmartin, Jr. in Encyclopedia Britannica (2008): "Hyder Ali, prince of Mysoremarker, developed war rockets with an important change: the use of metal cylinders to contain the combustion powder. Although the hammered soft iron he used was crude, the bursting strength of the container of black powder was much higher than the earlier paper construction. Thus a greater internal pressure was possible, with a resultant greater thrust of the propulsive jet. The rocket body was lashed with leather thongs to a long bamboo stick. Range was perhaps up to three-quarters of a mile (more than a kilometre). Although individually these rockets were not accurate, dispersion error became less important when large numbers were fired rapidly in mass attacks. They were particularly effective against cavalry and were hurled into the air, after lighting, or skimmed along the hard dry ground. Hyder Ali's son, Tippu Sultan, continued to develop and expand the use of rocket weapons, reportedly increasing the number of rocket troops from 1,200 to a corps of 5,000. In battles at Seringapatammarker in 1792 and 1799 these rockets were used with considerable effect against the British."Encyclopedia Britannica (2008), "rocket and missile" Tippu Sultan wrote a military manual on his rocket artillery, the Fathul Mujahidin.
  • Matchlock: The Janissary corps of the Ottoman army were using matchlock muskets as early as the 1440s. The first dated illustration of a matchlock mechanism in Europe dates to 1475.
  • Purified potassium nitrate: Muslim chemists were the first to purify potassium nitrate (saltpetre; natrun or barud in Arabic) to the weapons-grade purity for use in gunpowder, as potassium nitrate needs to be purified to be used effectively. This purification process was first described by Ibn Bakhtawayh in his al-Muqaddimat in 1029. The first complete purification process for potassium nitrate is described in 1270 by the Arab chemist and engineer Hasan al-Rammah of Syria in his book al-Furusiyya wa al-Manasib al-Harbiyya ('The Book of Military Horsemanship and Ingenious War Devices', a.k.a. the Treatise on Horsemanship and Stratagems of War). He first described the use of potassium carbonate (in the form of wood ashes) to remove calcium and magnesium salts from the potassium nitrate. Hasan al-Rammah also describes the purifying of saltpetre using the chemical processes of solution and crystallization, and this was the first clear method for the purification of saltpetre. Bert S. Hall, however, disputes the efficacy of al-Rammah's formula for the purification of potassium nitrate.
  • Torpedo: The invention of torpedoes occurred in the Muslim world, and were driven by a rocket system. The works of Hasan al-Rammah in Syriamarker in 1275 shows illustrations of a torpedo running on water with a rocket system filled with explosive materials and having three firing points.


Swordmaking

  • Damascus steel: One of the most famous steels produced in the medieval Near East was Damascus steel used for swordmaking, and mostly produced in Damascus, Syria, in the period from 900 to 1750. This was produced using the crucible steel method, based on the earlier Indian wootz steel. This process was further refined in the Middle East using locally produced steels. The process allowed carbides to precipitate out as micro particles arranged in sheets or bands within the body of a blade. The carbides are far harder than the surrounding low carbon steel, allowing the swordsmith to make an edge which would cut hard materials with the precipitated carbides, while the bands of softer steel allowed the sword as a whole to remain tough and flexible. A team of researchers based at the Technical Universitymarker of Dresdenmarker that uses x-rays and electron microscopy to examine Damascus steel discovered the presence of cementite nanowires

    and carbon nanotubes.
    Peter Paufler, a member of the Dresden team, says that these nanostructures give Damascus steel its distinctive properties and are a result of the forging process.
  • Flyssa and Kaskara: The swords developed in early Islamic Moroccomarker and the Baguirmi Sultanate, respectively.
  • Grip: In the late 12th century, the figure of a Turkish cavalryman was depicted holding a sabre which was carried using what what would later be known in Europe as the 'Italian Grip'.
  • Kilij: A sabre developed by the Turks in Central Asia, it came into widespread use by the 15th century. Polish sabres of the 17th century (known as pallash or palache) were derived from this weapon.
  • Nimcha: An Arab short sabre with a knuckle guard developed in Morocco.
  • Pulwar, Qama, and Quaddara: The pulwar is a form of talwar that was developed in Islamic India. The qama was a sword developed in Islamic Georgiamarker, and is probably the origin of the Cossack kindjal. The quaddara was a Persian broadsword, like a long kindjal, used in the Caucasus.
  • Sabre and Saif: The sabre and the Arab saif were developed in the early Islamic world.
  • Scimitar and Shamshir: The earliest evidence of the scimitar, or curved sword, is from the 9th century, when it was used among soldiers in the Khurasan region of Persia. The Persian shamshir in its current form dates to the 15th century.
  • Shashka and Shotel: Developed in the Caucasus and Abyssinia, respectively.
  • Takouba, Talwar, and Yatagan: The takouba was developed by the Taureg people of the Sahara. The talwar is an Indian sword based on the Persian shamshir. The yatagan was developed in Turkey.
  • Zulfiqar: An early Islamic sword that belonged to Ali in the 7th century.


Navigational technology

The 32-point compass rose was invented by Arab navigators.
Shown here is the one by Jorge de Aguiar (1492).


Instruments



Transport

  • Kamal: Arab navigators invented a rudimentary sextant known as a kamal, used for celestial navigation and for measuring the altitudes and latitudes of the stars, in the late 9th century. They employed in the Indian Ocean from the 10th century, and it was adopted by Indian navigators soon after, followed by Chinese navigators some time before the 16th century. The invention of the kamal allowed for the earliest known latitude sailing, and was thus the earliest step towards the use of quantitative methods in navigation.
  • Qarib: The origins of the caravel ship, used for long distance travel by the Spanish and Portuguese since the 15th century, date back to the qarib.
  • Rudder with tackle, permanent sternpost-mounted: The Arabs used a sternpost-mounted rudder which differed technically from both its European and Chinese counterparts. On their ships "the rudder is controlled by two lines, each attached to a crosspiece mounted on the rudder head perpendicular to the plane of the rudder blade."Lawrence V. Mott, p.93 The earliest evidence comes from the Ahsan al-Taqasim fi Marifat al-Aqalim ('The Best Divisions for the Classification of Regions') written by al-Muqaddasi in 985. According to Lawrence V. Mott, the "idea of attaching the rudder to the sternpost in a relatively permanent fashion, therefore, must have been an Arab invention independent of the Chinese."




  • Xebec and Polacca: The xebec and polacre sailing ships used around the Mediterranean Seamarker from the 16th to the 19th centuries originated from the Barbary pirates, who successfully used them for naval warfare against European ships at the time. A combination of the fore and aft sails and aerodynamics, along with the improved square sail on the Polacca, allowed these ships to sail much closer to the wind than European and American ships. An expert on the Barbary pirates said that their ships had guns at the bow and stern. “They would approach, pounding away, and it took too long for our square riggers to bring the broadside guns around. The Arabs had oars and a sail arrangement that meant they were able to turn more quickly and could flee closer to the wind than we could chase them."


Minaret of the Great Mosque at Córdoba, where Abbas Ibn Firnas flew from in the 9th century.


Aviation



Scientific instruments

Muslim astronomers developed a number of astronomical instruments, including several variations of the astrolabe, originally invented by Hipparchus in the 2nd century BCE, but with considerable improvements made to the device in the Muslim world. These instruments were used by Muslims for a variety of purposes. In the 10th century, Al-Sufi first described over 1,000 different uses of an astrolabe, related to astronomy, astrology, horoscopes, navigation, surveying, timekeeping, Qibla (direction to Mecca), Salah prayers, etc.

Analogue computers

The astrolabe was invented by Abū Ishāq Ibrāhīm al-Zarqālī (Arzachel) in Islamic Spain circa 1015.
The one shown here is from Persia in the 18th century.




  • Equatorium: Invented by Abū Ishāq Ibrāhīm al-Zarqālī (Arzachel) in Islamic Spain circa 1015, it was a mechanical analog computer device for finding the longitudes and positions of the moon, sun, and planet]s, without calculation using a geometrical model to represent the celestial body's mean and anomalistic position.
  • Saphaea: An astrolabe, invented by Abū Ishāq Ibrāhīm al-Zarqālī (Arzachel) in 11th century Islamic Spain.
  • Zuraqi: A heliocentric astrolabe where the Earth is in motion rather than the sky, by al-Sijzi in the 11th century.
  • Fixed-wired knowledge processing machine: Abū Rayhān al-Bīrūnī's hodometer was an early example of a fixed-wired knowledge processing machine in the early 11th century.
  • Mechanical lunisolar calendar computer: Featured a gear train and gear-wheels, and was invented by Abū Rayhān al-Bīrūnī.
  • Mechanical geared astrolabe: Invented by Ibn Samh (c. 1020).
  • Linear astrolabe ("staff of al-Tusi"): Invented by Sharaf al-Dīn al-Tūsī in the 12th century.
  • Programmable analog computer: The castle clock, an astronomical clock invented by Al-Jazari in 1206, is considered to be the earliest programmable analog computer. It displayed the zodiac, the solar and lunar orbits, a crescent moon-shaped pointer travelling across a gateway causing automatic doors to open every hour, and five robotic musicians who play music when moved by levers operated by a camshaft attached to a water wheel. The length of day and night could be re-programmed every day in order to account for the changing lengths of day and night throughout the year.
  • Mechanical geared astrolabe with calendar computer: Invented by Abi Bakr of Isfahanmarker in 1235.
  • Plate of Conjunctions: A computing instrument used to determine the time of day at which planetary conjunctions will occur, and for performing linear interpolation, invented by al-Kashi in the 15th century.
  • Planetary computer: The Plate of Zones, a mechanical planetary computer which could graphically solve a number of planetary problems, was invented by al-Kashi in the 15th century. It could predict the true positions in longitude of the sun and moon, and the planets in terms of elliptical orbits; the latitudes of the Sun, Moon, and planets; and the ecliptic of the Sun. The instrument also incorporated an alidade and ruler.


Laboratory apparatus

  • Conical measure: Abū Rayhān al-Bīrūnī in the 11th century.
  • Laboratory flask and pycnometer: Abū Rayhān al-Bīrūnī.
  • Refrigerated coil and refrigerated tubing: In the 11th century, Avicenna invented the refrigerated coil, which condenses aromatic vapours. This was a breakthrough in distillation technology and he made use of it in his steam distillation process, which requires refrigerated tubing, to produce essential oils.
  • Thermometer and air thermometer: Abū Alī ibn Sīnā (Avicenna) in the 11th century.


Mural instruments



  • Mural instrument: Invented by Al-Khwarizmi in 9th century Baghdad, Iraq.
  • Horary quadrant: For specific latitudes, by al-Khwarizmi in 9th century Baghdad.
  • Sine quadrant: - also known as the "Sinecal Quadrant", the Arabic term for it is "Rubul Mujayyab" – used for solving trigonometric problems and for astronomical calculations, by al-Khwarizmi in 9th century Baghdad.
  • Almucantar quadrant: Invented in the medieval Islamic world. It employed the use of trigonometry. The term "almucantar" is itself derived from Arabic.
  • Quadrans Vetus: Meaning "Old Quadrant", this was a universal horary quadrant which could be used for any latitude and at any time of the year to determine the time, as well as the times of Salah, invented by al-Khwarizmi in 9th century Baghdad. This was the second most widely used astronomical instrument during the Middle Ages after the astrolabe. One of its main purposes in the Islamic world was to determine the times of Salah prayers.David A. King (2002). "A Vetustissimus Arabic Text on the Quadrans Vetus", Journal for the History of Astronomy 33, p. 237-255 [237-238].
  • Quadrans Novus: An astrolabic quadrant invented in Egypt in the 11th century or 12th century, and later known in Europe as the "Quadrans Novus" (New Quadrant).
  • Sextant: The first sextant was constructed in Ray, Iranmarker, by Abu-Mahmud al-Khujandi in 994. It was a very large sextant that achieved a high level of accuracy for astronomical measurements, which he described his in his treatise, On the obliquity of the ecliptic and the latitudes of the cities. In the 15th century, Ulugh Beg constructed the mural "Fakhri Sextant", which had a radius of approximately 36 meters. Constructed in Samarkandmarker, Uzbekistanmarker, the arc was finely constructed with a staircase on either side to provide access for the assistants who performed the measurements.


Optical instruments

  • Observation tube: The "observation tube" (without lens) was invented by al-Battani (Albatenius) (853-929) and first described by al-Biruni (973-1048). These observation tubes were later adopted in Europe, where they influenced the development of the telescope.
  • Optics: Ibn al-Haytham (Alhazen), with his Book of Optics (1021), refuted the emission theory of vision, and correctly explained and proved the modern intromission theory of vision, through extensive experimentation. and visual perception,.
  • Camera obscura: Ibn al-Haytham worked out that the smaller the hole, the better the picture, and set up the first camera obscura, a precursor to the modern camera.
  • Pinhole camera: Ibn al-Haytham first described pinhole camera after noticing the way light came through a hole in window shutters.
  • Magnifying glass: The earliest evidence of "a magnifying device, a convex lens forming a magnified image", dates back the Book of Optics published by Ibn al-Haytham in 1021. The Latin translation of his work was instrumental to the later inventions of eyeglasses, the telescope, and the microscope.
  • Long-distance magnifying device: A long-distance magnifying device was invented by Taqi al-Din, as described in his Book of the Light of the Pupil of Vision and the Light of the Truth of the Sights around 1574. He describes it as an instrument that makes objects located far away appear closer to the observer, and that the instrument helps to see distant objects in detail by bringing them very close. He states that he wrote another earlier treatise explaining the way this instrument is made and used, suggesting that he invented it some time before 1574. It is questionable whether this device can be considered a rudimentary telescope of some kind.


Other instruments

  • Astrolabic clock: Ibn al-Shatir in the early 14th century.
  • Astronomical compass: The first astronomical uses of the magnetic compass is found in a treatise on astronomical instruments written by the Yemenimarker sultan al-Ashraf in 1282. This was the first reference to the compass in astronomical literature.
  • Compendium instrument: A multi-purpose astronomical instrument, first constructed by the Muslim astronomer Ibn al-Shatir in the 13th century. His compendium featured an alidade and polar sundial among other things. Al-Wafa'i developed another compendium in the 15th century which he called the "equatorial circle", which also featured a horizontal sundial. These compendia later became popular in Renaissance Europe. , in




  • Framed sextant: At the Istanbul observatory of al-Din between 1577 and 1580, Taqi al-Din invented the mushabbaha bi'l manattiq, a framed sextant with cords for the determination of the equinoxes similar to what Tycho Brahe later used.
  • Seamless globe and celestial globe: Considered one of the most remarkable feats in metallurgy, they were invented in Kashmirmarker by Ali Kashmiri ibn Luqman in 998 AH (1589-90 CE), and twenty other such globes were later produced in Lahoremarker and Kashmir during the Mughal Empire. Before they were rediscovered in the 1980s, it was believed by modern metallurgists to be technically impossible to produce metal globes without any seams, even with modern technology. These Mughal metallurgists pioneered the method of lost-wax casting while producing these seamless globes.
  • Shadow square: An instrument used to determine the linear height of an object, in conjunction with the alidade for angular observations, invented by Muhammad ibn Mūsā al-Khwārizmī in 9th-century Baghdad.


Timekeeping devices

The elephant clock from Al-Jazari's manuscript in 1206.
This was the earliest clock to employ a flow regulator, a closed-loop system, and an automaton like a cuckoo clock].


Astronomical clocks

Muslim astronomers and engineers constructed a variety of highly accurate astronomical clocks for use in their observatories.

  • Astronomical alarm clock: See Mechanical clocks below.
  • Geared mechanical lunisolar calendar computer: See Analog computers above.
  • Geared mechanical astrolabe: Featured a calendar computer and gear-wheels, and was invented by Abi Bakr of Isfahan in 1235.
  • Monumental water-powered astronomical clocks: Al-Jazari invented monumental water powered astronomical clocks which displayed moving models of the sun, moon, and stars. His largest astronomical clock displayed the zodiac and the solar and lunar orbits. Another innovative feature of the clock was a pointer which travelled across the top of a gateway and caused automatic doors to open every hour.
  • Observational clock measured in seconds: See Mechanical clocks below.
  • Programmable castle clock: See Analog computers above.
  • Quadrans Vetus: See Mural instruments above.
  • Timekeeping astrolabe: In the 10th century, al-Sufi described over 1,000 different uses of an astrolabe, including timekeeping, particularly for the times of Salah prayers and Ramadan.


Clocks with gears and escapements

  • Geared clock: The first geared clock was invented by the 11th-century Arab engineer Ibn Khalaf al-Muradi in Islamic Iberia; it was a water clock that employed both segmental and epicyclic gearing. Other monumental water clocks constructed by medieval Muslim engineers also employed complex gear trains and arrays of automata. The first European clock to employ these complex gears was the astronomical clock created by Giovanni de Dondi in c. 1365.
  • Weight-driven mercury clock: A mercury clock, employing a mercury escapement mechanism and a clock face similar to an astrolabe dial, was described in a Spanish language work for Alfonso X in 1277, compiled from earlier Arabic sources that likely date back to the 11th century. The Jewish author of the relevant section, Rabbi Isaac, constructed the mercury clock using principles described by a philosopher named "Iran", identified with Heron of Alexandria (fl. 1st century AD), on how heavy objects may be lifted. Knowledge of the mercury clock was later transmitted to other parts of Europe through translations.
  • Weight-driven water clock: Arab engineers invented weight-driven water clocks, where heavy floats were used as weights and a constant-head system was used as an escapement mechanism, which was present in in the hydraulic controls they used to make heavy floats descend at a slow and steady rate.Donald Routledge Hill (1996), "Engineering", p. 794, in
  • Weight-driven water-powered scribe clock: In 1206, Al-Jazari invented some of the earliest weight-driven water clocks, including the water-powered scribe clock. This water-powered portable clock was a meter high and half a meter wide. The scribe with his pen was synonymous to the hour hand of a modern clock. This is an example of an ingenious water system by Al-Jazari. Al-Jazari's famous water-powered scribe clock was reconstructed successfully at the Science Museum (London) in 1976.


Dials

  • Universal sundial: A universal sundial for all latitudes, used for timekeeping and for the determination of the times of Salah, was produced in 9th-century Baghdad.
  • Navicula de Venetiis: A universal horary dial used for accurate timekeeping by the sun and stars, and could be observed from any latitude, invented in 9th century Baghdad. This was later considered the most sophisticated timekeeping instrument of the Renaissance.
  • Polar-axis sundial: The ancient sundials were nodus-based with straight hour-lines, they indicated unequal hours—also called temporary hours—that varied with the seasons, since every day was divided into twelve equal segments; thus, hours were shorter in winter and longer in summer. The idea of using hours of equal time length throughout the year was the innovation of Ibn al-Shatir in 1371, based on earlier developments in trigonometry by Muhammad ibn Jābir al-Harrānī al-Battānī (Albategni). Ibn al-Shatir was aware that "using a gnomon that is parallel to the Earth's axis will produce sundials whose hour lines indicate equal hours on any day of the year." His sundial is the oldest polar-axis sundial still in existence. The concept later appeared in Western sundials from at least 1446.
  • Compass dial: See Instruments above.


Mechanical clocks

  • Astronomical clock with alarm: In 1559, Taqi al-Din developed a mechanical astronomical clock employing an alarm arrangement, which was capable of sounding at a specified time, achieved by means of placing a peg on the dial wheel to when one wants the alarm heard and by producing an automated ringing device at the specified time. He described it in his book, The Brightest Stars for the Construction of Mechanical Clocks (Al-Kawākib al-durriyya fī wadh' al-bankāmat al-dawriyya), published that year. A similar alarm arrangement, however, was previously already employed in several European monastic clocks during the 15th century
  • Observational clock, measured in seconds: Taqi al-Din invented the "observational clock", which he described as "a mechanical clock with three dials which show the hours, the minutes, and the seconds." This was the first clock to measure time in seconds, and was used for astronomical purposes, specifically for measuring the right ascension of the stars. This is considered one of the most important innovations in 16th century practical astronomy, as previous clocks were not accurate enough to be used for astronomical purposes. At the Istanbul observatory of Taqi al-Din, he further improved his observational clock, using only one dial to represent the hours, minutes and seconds, describing it as "a mechanical clock with a dial showing the hours, minutes and seconds and we divided every minute into five seconds."


Water clocks



Other inventions

Al-Kindi's 9th century Manuscript on Deciphering Cryptographic Messages was the first book on cryptanalysis and frequency analysis.
The lute was adopted from the Arab world.
1568 print.
The Arabic four-stringed oud was the ancestor of the lute and guitar.
The Arabic rebab was the ancestor of the rebec and the violin.


Other inventions from the Islamic world include:



Equipment

  • Fireproof paper, glow-in-the-dark ink, rust-free iron, and waterproof textile: According to Ismail al-Faruqi and Lois Lamya al-Faruqi, "In response to Jafar al-Sadik's wishes, [Jabir ibn Hayyan] invented a kind of paper that resisted fire, and an ink that could be read at night. He invented an additive which, when applied to an iron surface, inhibited rust and when applied to a textile, would make it water repellent."
  • Flat bronze stirrup: An early type of short stirrup that had originated in Turkey and was brought to the Americas by Spanish conquistadors.
  • Fustian: The original medieval fustian was a stout but respectable cloth with a cotton weft and a linen warp, derived from El-Fustatmarker, the name of a suburb of Cairo where this cloth was originally manufactured.
  • Graph paper, and orthogonal and regular grids: The first known use of graph paper dates back to the medieval Islamic world, where weavers often carefully drew and encoded their patterns onto graph paper prior to weaving. Islamic quadrants used for various astronomical and timekeeping purposes from the 10th century also introduced markings with orthogonal and regular grids that are still identical to modern graph paper.
  • Paper book and paper bookbinding: The Arabs revolutionised the book's production and its binding. They were the first to produce paper books after they learnt papermaking from the Chinese in the 8th century. Particular skills were developed for script writing (Arabic calligraphy), miniatures and bookbinding. The Arabs made books lighter—sewn with silk and bound with leather covered paste boards, they had a flap that wrapped the book up when not in use. As paper was less reactive to humidity, the heavy boards were not needed. The production of books became a real industry and cities like Marrakech in Morocco, had a street named "Kutubiyyin" or book sellers which contained more than 100 bookshops in the 12th century. In the words of Don Baker: "The world of Islam has produced some of the most beautiful books ever created. The need to write down the Revelations which the Prophet Muhammad, may peace be upon him, received, fostered the desire to beautify the object which conveyed these words and initiated this ancient craft. Nowhere else, except perhaps in China, has calligraphy been held in such high esteem. Splendid illumination was added with gold and vibrant colours, and the whole book contained and protected by beautiful bookbindings."


Musical instruments

  • Albogue, alboka, hornpipe, clarinets, and single-reed instrument: The earliest known hornpipes, clarinets and single-reed instruments were the albogue and alboka, both derived from the "al-bûq" (البوق) (literally "the trumpet" or "the horn") used in medieval Arabic music and Islamic music. The instrument was brought into Iberiamarker by the Arab conquest.
  • Guitar, lute, and oud: The modern guitar (qitar in Arabic) is descended from the four-string oud brought by the Moors after the Umayyad conquest of Hispania in the 8th century, and which evolved into the modern lute. The four-string guitar introduced by the Moors had eventually evolved into two types in Spain: the (Moorish guitar) which had a rounded back, wide fingerboard and several soundholes, and then by 1200, the (Latin guitar) which resembled the modern guitar with one soundhole and a narrower neck.
  • Hurdy gurdy and stringed keyboard instrument: The earliest stringed instrument with a musical keyboard, an ancestor of the piano, was the hurdy gurdy, but its origins are uncertain. According to a theory proposed by Marianne Bröcker, an instrument similar to the hurdy gurdy is first mentioned in an Arabic musical compendium written by Al Zirikli in the 10th century.
  • Long-distance organ: A long-distance hydraulic organ that could be heard from sixty miles away was first described in the medieval Arabic treatise Sirr al-asrar and later translated into Latin by Roger Bacon in the 13th century.
  • Mechanical musical instrument and automatic hydraulic organ: The Banū Mūsā brothers invented "the earliest known mechanical musical instrument", in this case a hydropowered organ which played interchangeable cylinders automatically. According to Charles B. Fowler, this "cylinder with raised pins on the surface remained the basic device to produce and reproduce music mechanically until the second half of the nineteenth century."
  • Programmable automatic flute player: The Banū Mūsā invented an automatic flute player which appears to have been the first programmable machine, and which they described in their Book of Ingenious Devices.
  • Timpani, naker, and naqareh: The modern timpani (kettle drum) evolved from the naker, the direct ancestor of most timpani, were were derived from the Arabic naqareh and brought to 13th century Continental Europe by Saracens and Crusaders.
  • Rebec and rebab: The rebec was in use since the 10th century, and was derived from the rebab which originated in medieval Arabic music and Islamic music.


See also



Notes

  1. Bernard Lewis, What Went Wrong:
  2. p. 45, Islamic & European expansion: the forging of a global order, Michael Adas, ed., Temple University Press, 1993, ISBN 1566390680.
  3. p. 53, Max Weber & Islam, Toby E. Huff and Wolfgang Schluchter, eds., Transaction Publishers, 1999, ISBN 1560004002.
  4. S. Hadzovic (1997). "Pharmacy and the great contribution of Arab-Islamic science to its development", Med Arh. 51 (1-2), p. 47-50.
  5. Diane Boulanger (2002), "The Islamic Contribution to Science, Mathematics and Technology: Towards Motivating the Muslim Child", OISE Papers in STSE Education, Vol. 3.
  6. Robert Briffault (1938). The Making of Humanity, p. 195.
  7. Marlene Ericksen (2000), Healing with Aromatherapy, p. 9, McGraw-Hill Professional, ISBN 0658003828
  8. Ahmad Y Hassan, The Colouring of Gemstones, The Purifying and Making of Pearls, And Other Useful Recipes
  9. Olga Pikovskaya, Repaying the West's Debt to Islam, BusinessWeek, March 29, 2005
  10. Khairallah, Amin A. (1946), Outline of Arabic Contributions to Medicine, chapter 10, Beirut
  11. (cf. Dr. A. Zahoor and Dr. Z. Haq (1997), Quotations From Famous Historians of Science)
  12. George Rafael, A is for Arabs, Salon.com, January 8, 2002.
  13. Levey M. (1973), ‘ Early Arabic Pharmacology’, E. J. Brill; Leiden.
  14. Salma Khadra Jayyusi and Manuela Marin (1994), The Legacy of Muslim Spain, p. 117, Brill Publishers, ISBN 9004095993
  15. Zayn Bilkadi (University of California, Berkeley), "The Oil Weapons", Saudi Aramco World, January-February 1995, pp. 20-27
  16. Deborah Rowe, How Islam has kept us out of the 'Dark Ages', Science and Society, Channel 4, May 2004.
  17. A.K. Bernsted 2003, Early Islamic Pottery: Materials and Techniques, London: Archetype Publications Ltd., 25; R.B. Mason and M.S. Tite 1994, The Beginnings of Islamic Stonepaste Technology, Archaeometry 36.1: 77
  18. Mason and Tite 1994, 77.
  19. Mason and Tite 1994, 79-80.
  20. Caiger-Smith, 1973, p.65
  21. M.S. Tite 1989, Iznik Pottery: An Investigation of the Methods of Production, Archaeometry 31.2: 115.
  22. Tite 1989, 120.
  23. Tite 1989, 129.
  24. Tite 1989, 120, 123.
  25. Ten thousand years of pottery, Emmanuel Cooper, University of Pennsylvania Press, 4th ed., 2000, ISBN 0812235541, pp. 86–88.
  26. Standard Terminology Of Ceramic Whiteware and Related Products. ASTM Standard C242.
  27. Caiger-Smith, 1973, p.23
  28. Islam: Empire of Faith, Part One, after the 50th minute.
  29. Al-Jazari, The Book of Knowledge of Ingenious Mechanical Devices: Kitáb fí ma'rifat al-hiyal al-handasiyya, translated by P. Hill (1973). Springer.
  30. Donald Routledge Hill (1996), "Engineering", pp. 766-9, in
  31. David A. King (1984), "Architecture and Astronomy: The Ventilators of Medieval Cairo and Their Secrets", Journal of the American Oriental Society 104 (1): 97-133
  32. Howard R. Turner (1997), Science in Medieval Islam: An Illustrated Introduction, p. 181, University of Texas Press, ISBN 0292781490
  33. Supplemental figures
  34. Irfan Habib (1992), "Akbar and Technology", Social Scientist 20 (9-10), pp. 3-15 [3-4].
  35. Adam Robert Lucas (2005), "Industrial Milling in the Ancient and Medieval Worlds: A Survey of the Evidence for an Industrial Revolution in Medieval Europe", Technology and Culture 46 (1): 1-30
  36. Donald Routledge Hill (1996), "Engineering", p. 781, in
  37. The Beginning of the Paper Industry, Foundation for Science Technology and Civilisation.
  38. Ahmad Y Hassan, Donald Routledge Hill (1986). Islamic Technology: An illustrated history, p. 54. Cambridge University Press. ISBN 0-521-42239-6.
  39. Dietrich Lohrmann (1995). "Von der östlichen zur westlichen Windmühle", Archiv für Kulturgeschichte 77 (1), p. 1-30 (8).
  40. A.G. Drachmann, "Heron's Windmill", Centaurus, 7 (1961), pp. 145-151
  41. Dietrich Lohrmann, "Von der östlichen zur westlichen Windmühle", Archiv für Kulturgeschichte, Vol. 77, Issue 1 (1995), pp.1-30 (10f.)
  42. The invention of cosmetics. 1001 Inventions.
  43. Dunlop, D.M. (1975), "Arab Civilization", Librairie du Liban
  44. Levey, Martin (1973), "Early Arabic Pharmacology", E.J. Brill: Leiden, ISBN 90-04-03796-9.
  45. Al-Kindi, FSTC
  46. How Islam invented a bright new world, The Herald, 25/10/2007.
  47. The Guinness Book Of Records, 1998, p. 242, ISBN 0-5535-7895-2
  48. John Bagot Glubb: (cf. Quotations on Islamic Civilization)
  49. Toby E. Huff (2003), The Rise of Early Modern Science: Islam, China and the West, Cambridge University Press, pp. 77-8
  50. , in
  51. Peter Barrett (2004), Science and Theology Since Copernicus: The Search for Understanding, p. 18, Continuum International Publishing Group, ISBN 056708969X
  52. in
  53. S. Hadzovic (1997). "Pharmacy and the great contribution of Arab-Islamic science to its development", Medicinski Arhiv 51 (1-2), p. 47-50.
  54. Sharif Kaf al-Ghazal, Journal of the International Society for the History of Islamic Medicine, 2004 (3), pp. 3-9 [8].
  55. Sir John Bagot Glubb (cf. Dr. A. Zahoor (1999), Quotations on Islamic Civilization)
  56. Ibrahim B. Syed PhD, "Islamic Medicine: 1000 years ahead of its times", Journal of the Islamic Medical Association, 2002 (2), p. 2-9 [7-8].
  57. , in
  58. David W. Tschanz, MSPH, PhD (August 2003). "Arab Roots of European Medicine", Heart Views 4 (2).
  59. Lynn Townsend White, Jr. (Spring, 1961). "Eilmer of Malmesbury, an Eleventh Century Aviator: A Case Study of Technological Innovation, Its Context and Tradition", Technology and Culture 2 (2), p. 97-111 [100-1]
  60. Andrew Wilson: "Machines, Power and the Ancient Economy", Journal of Roman Studies, Vol. 92. (2002), pp. 1-32 (16)
  61. Georges Ifrah (2001), The Universal History of Computing: From the Abacus to the Quatum Computer, p. 171, Trans. E.F. Harding, John Wiley & Sons, Inc. (See [1])
  62. Segment gear, TheFreeDictionary.com
  63. The Automata of Al-Jazari. The Topkapi Palace Museum, Istanbul.
  64. Donald Routledge Hill (1998). Studies in Medieval Islamic Technology II, p. 231-232.
  65. Ahmad Y Hassan. The Crank-Connecting Rod System in a Continuously Rotating Machine, History of Science and Technology in Islam.
  66. Donald Routledge Hill, "Engineering", in Roshdi Rashed, ed., Encyclopedia of the History of Arabic Science, Vol. 2, p. 751-795 [792]. Routledge, London and New York.
  67. Howard R. Turner (1997), Science in Medieval Islam: An Illustrated Introduction, p. 181, University of Texas Press, ISBN 0292781490.
  68. Richard W. Bulliet (1987), "Medieval Arabic Tarsh: A Forgotten Chapter in the History of Printing", Journal of the American Oriental Society 107 (3), p. 427-438.
  69. F. L. Lewis (1992), Applied Optimal Control and Estimation, Englewood Cliffs, Prentice-Hall, New Jersey.
  70. Ahmad Y Hassan (1976), Taqi al-Din and Arabic Mechanical Engineering, p. 34-35. Institute for the History of Arabic Science, University of Aleppo.
  71. Otto Mayr (1970). The Origins of Feedback Control, MIT Press.
  72. Al-Jazari, The Book of Knowledge of Ingenious Mechanical Devices: Kitáb fí ma'rifat al-hiyal al-handasiyya, translated by P. Hill (1973). Springer.
  73. Derek de Solla Price (1975). "The Book of Knowledge of Ingenious Mechanical Devices by Ibn al-Razzaz al-Jazari", Technology and Culture 16 (1), p. 81.
  74. The Machines of Al-Jazari and Taqi Al-Din (2004), Foundation for Science Technology and Civilisation.
  75. Teun Koetsier (2001). "On the prehistory of programmable machines: musical automata, looms, calculators", Mechanism and Machine theory 36, p. 590-591.
  76. A 13th Century Programmable Robot. University of Sheffield.
  77. Ahmad Y Hassan, Al-Jazari and the History of the Water Clock
  78. Donald Routledge Hill (1996), "Engineering", p. 771, in
  79. Ahmad Y Hassan, The Origin of the Suction Pump – Al-Jazari 1206 A.D., History of Science and Technology in Islam
  80. Ahmad Y Hassan, Flywheel Effect for a Saqiya, History of Science and Technology in Islam.
  81. Donald Routledge Hill, "Engineering", p. 779, in
  82. The Valuable Contribution of al-Razi (Rhazes) to the History of Pharmacy, FSTC
  83. D. Craig Brater and Walter J. Daly (2000), "Clinical pharmacology in the Middle Ages: Principles that presage the 21st century", Clinical Pharmacology & Therapeutics 67 (5): 447-450 [448-9]
  84. David W. Tschanz, MSPH, PhD (August 2003), "Arab Roots of European Medicine", Heart Views 4 (2)
  85. Jonathan D. Eldredge (2003), "The Randomised Controlled Trial design: unrecognized opportunities for health sciences librarianship", Health Information and Libraries Journal 20, p. 34–44 [36].
  86. Bernard S. Bloom, Aurelia Retbi, Sandrine Dahan, Egon Jonsson (2000), "Evaluation Of Randomized Controlled Trials On Complementary And Alternative Medicine", International Journal of Technology Assessment in Health Care 16 (1), p. 13–21 [19].
  87. Walter J. Daly and D. Craig Brater (2000), "Medieval contributions to the search for truth in clinical medicine", Perspectives in Biology and Medicine 43 (4), p. 530–540 [536], Johns Hopkins University Press.
  88. Diane Boulanger (2002), "The Islamic Contribution to Science, Mathematics and Technology", OISE Papers, in STSE Education, Vol. 3
  89. Islamic medicine, Hutchinson Encyclopedia
  90. Philip K. Hitti (cf. Dr. Kasem Ajram (1992), Miracle of Islamic Science, Appendix B, Knowledge House Publishers. ISBN 0911119434)
  91. Dr. Z. Idrisi, PhD (2005), The Muslim Agricultural Revolution and its influence on Europe, Foundation for Science, Technology and Civilization, United Kingdom
  92. M. Krek (1979), "The Enigma of the First Arabic Book Printed from Movable Type", Journal of Near Eastern Studies 38 (3): 203-12
  93. Yalcin Tekol (2007), "The medieval physician Avicenna used an herbal calcium channel blocker, Taxus baccata L.", Phytotherapy Research 21 (7): 701-2
  94. A. Al Dayela and N. al-Zuhair (2006), "Single drug therapy in the treatment of male sexual/erectile dysfunction in Islamic medicine", Urology 68 (1): 253-4
  95. Patricia Skinner (2001), Unani-tibbi, Encyclopedia of Alternative Medicine
  96. Zafarul-Islam Khan, At The Threshhold (sic) Of A New Millennium – II, The Milli Gazette.
  97. Khaled al-Hadidi (1978), "The Role of Muslem Scholars in Oto-rhino-Laryngology", The Egyptian Journal of O.R.L. 4 (1), p. 1-15. (cf. Ear, Nose and Throat Medical Practice in Muslim Heritage, Foundation for Science Technology and Civilization.)
  98. Ingrid Hehmeyer and Aliya Khan (2007). "Islam's forgotten contributions to medical science", Canadian Medical Association Journal 176 (10).
  99. Sigrid Hunke (1969), Allah Sonne Uber Abendland, Unser Arabische Erbe, Second Edition, p. 279-280 (cf. Prof. Dr. M. Taha Jasser, Anaesthesia in Islamic medicine and its influence on Western civilization, Conference on Islamic Medicine)
  100. G. Bademci (2006), First illustrations of female "Neurosurgeons" in the fifteenth century by Serefeddin Sabuncuoglu, Neurocirugía 17: 162-165.
  101. Rabie E. Abdel-Halim, Ali S. Altwaijiri, Salah R. Elfaqih, Ahmad H. Mitwall (2003), "Extraction of urinary bladder described by Abul-Qasim Khalaf Alzahrawi (Albucasis) (325-404 H, 930-1013 AD)", Saudi Medical Journal 24 (12): 1283-1291 [1289].
  102. A. I. Makki. "Needles & Pins", AlShindagah 68, January-February 2006.
  103. Prof. Dr. Mostafa Shehata, "The Ear, Nose and Throat in Islamic Medicine", Journal of the International Society for the History of Islamic Medicine, 2003 (1): 2-5 [4].
  104. Blair, Claude and Tarassuk, Leonid, eds. (1982). The Complete Encyclopedia of Arms and Weapons. p.17-18. Simon & Schuster. ISBN 067142257X.
  105. Ahmad Y Hassan, The Colouring of Gemstones, The Purifying and Making of Pearls, And Other Useful Recipes
  106. William Johnson, "The Sultan's Big Guns." Dragoman, vol.1, no.2 [2]
  107. A. K. Bag (2005), "Fathullah Shirazi: Cannon, Multi-barrel Gun and Yarghu", Indian Journal of History of Science 40 (3), pp. 431-436.
  108. Roddam Narasimha (1985). Rockets in Mysore and Britain, 1750-1850 A.D. National Aeronautical Laboratory and Indian Institute of Science.
  109. Ahmad Y Hassan, Gunpowder Composition for Rockets and Cannon in Arabic Military Treatises In Thirteenth and Fourteenth Centuries, History of Science and Technology in Islam.
  110. Ahmad Y Hassan, Potassium Nitrate in Arabic and Latin Sources, History of Science and Technology in Islam
  111. Bert S. Hall, in introduction to J. R. Partington, A History of Greek Fire and Gunpowder, p. xxvii.
  112. Legendary Swords' Sharpness, Strength From Nanotubes, Study Says
  113. Dr. Salah Zaimeche PhD (University of Manchester Institute of Science and Technology), 1000 years of missing Astronomy, FSTC.
  114. David A. King, "Reflections on some new studies on applied science in Islamic societies (8th-19th centuries)", Islam & Science, June 2004.
  115. David A. King (1997). "Two Iranian World Maps for Finding the Direction and Distance to Mecca", Imago Mundi 49, p. 62-82 [62].
  116. Muzaffar Iqbal, "David A. King, World-Maps for Finding the Direction and Distance to Mecca: Innovation and Tradition in Islamic Science", Islam & Science, June 2003.
  117. G. R. Tibbetts (1973), "Comparisons between Arab and Chinese Navigational Techniques", Bulletin of the School of Oriental and African Studies 36 (1), p. 97-108 [105-106].
  118. Robert Hannah (1997). "The Mapping of the Heavens by Peter Whitfield", Imago Mundi 49, p. 161-162.
  119. Khwarizm, Foundation for Science Technology and Civilisation.
  120. John M. Hobson (2004), The Eastern Origins of Western Civilisation, p. 141, Cambridge University Press, ISBN 0521547245.
  121. Lawrence V. Mott, p.92f.
  122. Lynn Townsend White, Jr. (Spring, 1961). "Eilmer of Malmesbury, an Eleventh Century Aviator: A Case Study of Technological Innovation, Its Context and Tradition", Technology and Culture 2 (2), p. 97-111 [100f.]
  123. Dr. Emily Winterburn (National Maritime Museum), Using an Astrolabe, Foundation for Science Technology and Civilisation, 2005.
  124. M. T. Houtsma and E. van Donzel (1993), E. J. Brill's First Encyclopaedia of Islam, Brill Publishers, ISBN 9004082654
  125. Seyyed Hossein Nasr (1993), An Introduction to Islamic Cosmological Doctrines, p. 135-136. State University of New York Press, ISBN 0791415163.
  126. D. De S. Price (1984). "A History of Calculating Machines", IEEE Micro 4 (1), p. 22-52.
  127. Tuncer Oren (2001). "Advances in Computer and Information Sciences: From Abacus to Holonic Agents", Turk J Elec Engin 9 (1), p. 63-70 [64].
  128. Donald Routledge Hill (1985). "Al-Biruni's mechanical calendar", Annals of Science 42, p. 139-163.
  129. Islam, Knowledge, and Science, University of Southern California
  130. Linear astrolabe, Encyclopædia Britannica.
  131. Donald Routledge Hill, "Mechanical Engineering in the Medieval Near East", Scientific American, May 1991, pp. 64-9 (cf. Donald Routledge Hill, Mechanical Engineering)
  132. Howard R. Turner (1997), Science in Medieval Islam: An Illustrated Introduction, p. 184, University of Texas Press, ISBN 0292781490
  133. Silvio A. Bedini, Francis R. Maddison (1966). "Mechanical Universe: The Astrarium of Giovanni de' Dondi", Transactions of the American Philosophical Society 56 (5), p. 1-69.
  134. E. S. Kennedy (1947), "Al-Kashi's Plate of Conjunctions", Isis 38 (1-2), p. 56-59 [56].
  135. E. S. Kennedy (1950), "A Fifteenth-Century Planetary Computer: al-Kashi's Tabaq al-Manateq I. Motion of the Sun and Moon in Longitude", Isis 41 (2), p. 180-183.
  136. E. S. Kennedy (1952), "A Fifteenth-Century Planetary Computer: al-Kashi's Tabaq al-Maneteq II: Longitudes, Distances, and Equations of the Planets", Isis 43 (1), p. 42-50.
  137. E. S. Kennedy (1951), "An Islamic Computer for Planetary Latitudes", Journal of the American Oriental Society 71 (1), p. 13-21.
  138. Marshall Clagett (1961). The Science of Mechanics in the Middle Ages, p. 64. University of Wisconsin Press.
  139. M. Rozhanskaya and I. S. Levinova, "Statics", in (cf. Khwarizm, Foundation for Science Technology and Civilisation.)
  140. Robert E. Hall (1973). "Al-Khazini", Dictionary of Scientific Biography, Vol. VII, p. 346.
  141. Robert Briffault (1938). The Making of Humanity, p. 191.
  142. David A. King, "Islamic Astronomy", in Christopher Walker (1999), ed., Astronomy before the telescope, p. 167-168. British Museum Press. ISBN 0-7141-2733-7.
  143. Elly Dekker (1995), "An unrecorded medieval astrolabe quadrant from c. 1300", Annals of Science 52 (1), p. 1-47 [6].
  144. Roberto Moreno, Koenraad Van Cleempoel, David King (2002). "A Recently Discovered Sixteenth-Century Spanish Astrolabe", Annals of Science 59 (4), p. 331-362 [333].
  145. Regis Morelon, "General Survey of Arabic Astronomy", pp. 9-10, in
  146. O. S. Marshall (1950). "Alhazen and the Telescope", Astronomical Society of the Pacific Leaflets 6, p. 4
  147. Richard Powers (University of Illinois), Best Idea; Eyes Wide OpenNew York Times, April 18, 1999.
  148. (cf. )
  149. David A. King (1983). "The Astronomy of the Mamluks", Isis 74 (4), p. 531-555 [545-546].
  150. Emilie Savage-Smith (1988), "Gleanings from an Arabist's Workshop: Current Trends in the Study of Medieval Islamic Science and Medicine", Isis 79 (2): 246-266 [263].
  151. David A. King (2002). "A Vetustissimus Arabic Text on the Quadrans Vetus", Journal for the History of Astronomy 33, p. 237-255 [238-239].
  152. Dr. Kasem Ajram (1992). Miracle of Islamic Science, Appendix B. Knowledge House Publishers. ISBN 0911119434.
  153. Donald Routledge Hill, "Mechanical Engineering in the Medieval Near East", Scientific American, May 1991, p. 64-69. (cf. Donald Routledge Hill, Mechanical Engineering)
  154. Ahmad Y Hassan, Transfer Of Islamic Technology To The West, Part II: Transmission Of Islamic Engineering, History of Science and Technology in Islam
  155. Hassan, Ahmad Y, Transfer Of Islamic Technology To The West, Part II: Transmission Of Islamic Engineering, History of Science and Technology in Islam
  156. Donald Routledge Hill (1996), A History of Engineering in Classical and Medieval Times, Routledge, p.224.
  157. Ibn al-Razzaz Al-Jazari (ed. 1974) The Book of Knowledge of Ingenious Mechanical Devices, Translated and annotated by Donald Routledge Hill, Dordrecht / D. Reidel, part II.
  158. David A. King, "Islamic Astronomy", p. 168-169.
  159. David A. King (December 2003). "14th-Century England or 9th-Century Baghdad? New Insights on the Elusive Astronomical Instrument Called Navicula de Venetiis", Centaurus 45 (1-4), p. 204-226.
  160. David A. King, "Reflections on some new studies on applied science in Islamic societies (8th-19th centuries)", Islam & Science, June 2004.
  161. Sevim Tekeli, "Taqi al-Din", in Helaine Selin (1997), Encyclopaedia of the History of Science, Technology, and Medicine in Non-Western Cultures, Kluwer Academic Publishers, ISBN 0792340663.
  162. (cf. )
  163. The Machines of Al-Jazari and Taqi Al-Din, Foundation for Science Technology and Civilization.
  164. Professor Salim T. S. Al-Hassani (2006). 1001 Inventions: Muslim Heritage in Our World. FSTC. ISBN 0955242606.
  165. Where the heart is, 1001 Inventions: Muslim Heritage in Our World, 2006.
  166. Laura Shannon (2006). 1001 Inventions At Museum Of Science And Industry Manchester.
  167. Ibrahim A. Al-Kadi (April 1992), "The origins of cryptology: The Arab contributions", Cryptologia 16 (2): 97–126
  168. , Chapter 5
  169. Skinner, Stephen (1980). Terrestrial Astrology: Divination by Geomancy. London: Routeledge & Kegan Paul Ltd. pp.14-5
  170. Paul Vallely, How Islamic Inventors Changed the World, The Independent, 11 March 2006.
  171. Rosanna Gorini (2003), "Al-Haytham the Man of Experience, First Steps in the Science of Vision", International Society for the History of Islamic Medicine, Institute of Neurosciences, Laboratory of Psychobiology and Psychopharmacology, Rome, Italy:
  172. Rüdiger Thiele (2005), "In Memoriam: Matthias Schramm", Arabic Sciences and Philosophy 15: 329–31, Cambridge University Press
  173. Ismail al-Faruqi and Lois Lamya al-Faruqi (1986), The Cultural Atlas of Islam, p. 328, New York
  174. Donald King in: Jonathan Alexander & Paul Binski (eds), Age of Chivalry, Art in Plantagenet England, 1200-1400, p.157, Royal Academy/Weidenfeld & Nicholson, London 1987
  175. David J Roxburgh (2000), Muqarnas: An Annual on the Visual Culture of the Islamic World, p. 21, Brill Publishers, ISBN 9004116699.
  176. Josef W. Meri (2006), Medieval Islamic Civilization: An Encyclopedia, p. 75, Taylor and Francis, ISBN 0415966914.
  177. David A. King (1999), World-maps for Finding the Direction and Distance to Mecca: Innovation and Tradition in Islamic Science, p. 17, Brill Publishers, ISBN 9004113673.
  178. Al-Hassani, Woodcock and Saoud, "1001 Inventions, Muslim heritage in Our World", FSTC Publishing, 2006, reprinted 2007, pp.218-219.
  179. The famous Kutubiya mosque is named so because of its location in this street
  180. Baker, Don, "The golden age of Islamic bookbinding", Ahlan Wasahlan, (Public Relations Div., Saudi Arabian Airlines, Jeddah), 1984. pp. 13-15 [13]
  181. Summerfield, Maurice J. (2003). The Classical Guitar, It's Evolution, Players and Personalities since 1800 (5th ed.) Blaydon on Tyne: Ashley Mark Publishing. ISBN 1-872-63946-1.
  182. [A Look At The History Of The Guitar http://www.thejazzfestival.net/showarticle?id=109580]


References




Embed code:






Got something to say? Make a comment.
Your name
Your email address
Message