The Full Wiki

Niobium: Map


Wikipedia article:

Map showing all locations mentioned on Wikipedia article:

Niobium ( ) (Greek mythology: Niobe, daughter of Tantalus), or columbium ( ), is the chemical element with the symbol Nb and the atomic number 41. A rare, soft, grey, ductile transition metal, niobium is found in the minerals pyrochlore, the main commercial source for niobium, and columbite.

Niobium has physical and chemical properties similar to those of the element tantalum, and the two are therefore difficult to distinguish. The English chemist Charles Hatchett reported a new element similar to tantalum in 1801, and named it columbium. In 1809, the English chemist William Hyde Wollaston wrongly concluded that tantalum and columbium were identical. The German chemist Heinrich Rose determined in 1846 that tantalum ores contain a second element, which he named niobium. In 1864 and 1865, a series of scientific findings clarified that niobium and columbium were the same element (as distinguished from tantalum), and for a century both names were used interchangeably. The name of the element was officially adopted as niobium in 1949.

It was not until the early 20th century that niobium was first used commercially. Brazilmarker is the leading producer of niobium and ferroniobium, an alloy of niobium and iron. Niobium is used mostly in alloys, the largest part in special steel such as that used in gas pipelines. Although alloys contain only a maximum of 0.1%, that small percentage of Niobium improves the strength of the steel. The temperature stability of niobium-containing superalloys is important for its use in jet engines and rocket engines. Niobium is used in various superconducting materials. These superconducting alloy, also containing titanium and tin, are widely used in the superconducting magnets of MRI scanners. Other applications of niobium include its use in welding, nuclear industries, electronics, optics, numismatics and jewelry. In the last two applications, niobium's low toxicity and ability to be coloured by anodisation are particular advantages.


Charles Hatchett discoverer of columbium.

Niobium was discovered by the English chemist Charles Hatchett in 1801. He found a new element in a mineral sample that had been sent to England from Massachusettsmarker, United Statesmarker in 1734 by a John Winthrop, and named the mineral columbite and the new element columbium after Columbia, the poetical name for Americamarker. The columbium discovered by Hatchett was probably a mixture of the new element with tantalum.

Subsequently, there was considerable confusion over the difference between columbium (niobium) and the closely related tantalum. In 1809, the English chemist William Hyde Wollaston compared the oxides derived from both columbium—columbite, with a density 5.918 g/cm3, and tantalum—tantalite, with a density 7.935 g/cm3, and concluded that the two oxides, despite the significant difference in density, were identical; thus he kept the name tantalum. This conclusion was disputed in 1846 by the German chemist Heinrich Rose, who argued that there were two different elements in the tantalite sample, and named them after children of Tantalus: niobium (from Niobe), and pelopium (from Pelops). This confusion arose from the minimal observed differences between tantalum and niobium. Both tantalum and niobium react with chlorine and traces of oxygen, including atmospheric concentrations, with niobium forming two compounds: the white volatile niobium pentachloride (NbCl5) and the non-volatile niobium oxychloride (NbOCl3). The claimed new elements pelopium, ilmenium and dianium were in fact identical to niobium or mixtures of niobium and tantalum.

The differences between tantalum and niobium were unequivocally demonstrated in 1864 by Christian Wilhelm Blomstrand, and Henri Etienne Sainte-Claire Deville, as well as Louis J. Troost, who determined the formulas of some of the compounds in 1865 and finally by the Swiss chemist Jean Charles Galissard de Marignac in 1866, who all proved that there were only two elements. These discoveries did not stop scientists from publishing articles about ilmenium until 1871.De Marignac was the first to prepare the metal in 1864, when he reduced niobium chloride by heating it in an atmosphere of hydrogen.

Although de Marignac was able to produce tantalum-free niobium on a larger scale by 1866, it was not until the early 20th century that niobium was first used commercially, in incandescent lamp filaments. This use quickly became obsolete through the replacement of niobium with tungsten, which has a higher melting point and thus is preferable for use in incandescent lamps. The discovery that niobium improves the strength of steel was made in the 1920s, and this remains its predominant use. In 1961 the American physicist Eugene Kunzler and coworkers at Bell Labsmarker discovered that niobium-tin continues to exhibit superconductivity in the presence of strong electric currents and magnetic fields, making it the first material known to support the high currents and fields necessary for making useful high-power magnets and electrically powered machinery. This discovery would allow—two decades later—the production of long multi-strand cables that could be wound into coils to create large, powerful electromagnets for rotating machinery, particle accelerators, or particle detectors.

Columbium (symbol Cb) was the name originally given to this element by Hatchett, and this name remained in use in American journals—the last paper published by American Chemical Society with columbium in its title dates from 1953—while niobium was used in Europe. To end this confusion, the name niobium was chosen for element 41 at the 15th Conference of the Union of Chemistry in Amsterdam in 1949. A year later this name was officially adopted by the International Union of Pure and Applied Chemistry (IUPAC) after 100 years of controversy, despite the chronological precedence of the name Columbium. The latter name is still sometimes used in US industry. This was a compromise of sorts; the IUPAC accepted tungsten instead of wolfram, in deference to North American usage; and niobium instead of columbium, in deference to European usage. Not everyone agreed, and while many leading chemical societies and government organizations refer to it by the official IUPAC name, many leading metallurgists, metal societies, and the United States Geological Survey still refer to the metal by the original "columbium".


Niobium is a lustrous, grey, ductile, paramagnetic metal in group 5 of the periodic table (see table to right),

Z Element No. of electrons/shell
23 vanadium 2, 8, 11, 2
41 niobium 2, 8, 18, 12, 1
73 tantalum 2, 8, 18, 32, 11, 2
105 dubnium 2, 8, 18, 32, 32, 11, 2

although it has an atypical configuration in its outermost electron shells compared to the rest of the members. (This can be observed in the neighborhood of niobium (41), ruthenium (44), rhodium (45), and palladium (46).)

The metal takes on a bluish tinge when exposed to air at room temperature for extended periods. Despite presenting a high melting point in elemental form (2,468 °C), it has a low density in comparison to other refractory metals. Furthermore, it is corrosion resistant, exhibits superconductivity properties, and forms dielectric oxide layers. These properties— especially the superconductivity —are strongly dependent on the purity of the niobium metal. When very pure, it is comparatively soft and ductile, but impurities make it harder.

The atoms of niobium is slightly less electropositive and smaller than the atoms of its predecessor in the periodic table, zirconium, while it is virtually identical in size to the heavier tantalum atoms as a consequence of the lanthanide contraction. As a result, niobium's chemical properties are very similar to the chemical properties of tantalum, which appears directly below niobium in the periodic table. Although its corrosion resistance is not as outstanding as that of tantalum, its lower price and greater availability make niobium attractive for less exact uses such as linings in chemical plants.


Naturally occurring niobium is composed of one stable isotope, 93Nb. As of 2003, at least 32 radioisotopes have also been synthesized, ranging in atomic mass from 81 to 113. The most stable of these is 92Nb with a half-life of 34.7 million years. One of the least stable is 113Nb, with an estimated half-life of 30 milliseconds. Isotopes that are lighter than the stable 93Nb tend to decay by β+ decay, and those that are heavier tend to decay by β- decay, with some exceptions. 81Nb, 82Nb, and 84Nb have minor β+ delayed proton emission decay paths, 91Nb decays by electron capture and positron emission, and 92Nb decays by both β+ and β- decay.

At least 25 nuclear isomers have been described, ranging in atomic mass from 84 to 104. Within this range, only 96Nb, 101Nb, and 103Nb do not have isomers. The most stable of niobium's isomers is 93mNb with a half-life of 16.13 years. The least stable isomer is 84mNb with a half-life of 103 ns. All of niobium's isomers decay by isomeric transition or beta decay except 92m1Nb, which has a minor electron capture decay chain.


Niobium is in many ways similar to its predecessors in group 5. It reacts with most nonmetals at high temperatures: niobium reacts with fluorine at room temperature, with chlorine and hydrogen at 200 °C, and with nitrogen at 400 °C, giving products that are frequently interstitial and nonstoichiometric. The metal begins to oxidize in air at 200 °C, and is resistant to corrosion by fused alkalis and by acids, including aqua regia, hydrochloric, sulfuric, nitric and phosphoric acids. Niobium is attacked by hot, concentrated mineral acids, such as fluorhydric acid and fluorhydric/nitric acid mixtures. Although niobium exhibits all the formal oxidation states from +5 down to -1, its most stable state is +5.

Niobium is able to form oxides with the oxidation states +5 (Nb2O5), +4 (NbO2) and +3 (Nb2O3), as well as with the rarer oxidation state +2 (NbO). The most stable oxidation state is +5, the pentoxide which, along with the dark green non-stoichiometric dioxide, is the most common of the oxides. Niobium pentoxide is used mainly in the production of capacitors, optical glass, and as starting material for several niobium compounds. The compounds are created by dissolving the pentoxide in basic hydroxide solutions or by melting it in another metal oxide. Examples are lithium niobate (LiNbO3) and lanthanum niobate (LaNbO4). In the lithium niobate, the niobate ion NbO3 is not alone but part of a trigonally distorted perovskite-like structure, while the lanthanum niobate contains lone NbO43− ions. Lithium niobate, which is a ferroelectric, is used extensively in mobile telephones and optical modulators, and for the manufacture of surface acoustic wave devices. It belongs to the ABO3 structure ferroelectrics like lithium tantalate and barium titanate.

Niobium forms halogen compounds in the oxidation states of +5, +4, and +3 of the type , , and , although multi-core complexes and substoichiometric compound are also formed. Niobium pentafluoride (NbF5) is a white solid with a melting point of 79.0 °C and niobium pentachloride (NbCl5) is a yellowish-white solid (see image at left) with a melting point of 203.4 °C. Both are hydrolyzed by water and react with additional niobium at elevated temperatures by forming the black and highly hygroscopic niobium tetrafluoride (NbF4) and niobium tetrachloride (NbCl4). While the trihalogen compounds can be obtained by reduction of the pentahalogens with hydrogen, the dihalogen compounds do not exist. Spectroscopically, the monochloride (NbCl) has been observed at high temperatures. The fluorides of niobium can be used after its separation from tantalum. The niobium pentachloride is used in organic chemistry as a Lewis acid in activating alkenes for the carbonyl-ene reaction and the Diels-Alder reaction. The pentachloride is also used to generate the organometallic compound niobocene dichloride ( ), which in turn is used as a starting material for other organoniobium compounds.

Other binary compounds of niobium include niobium nitride (NbN), which becomes a superconductor at low temperatures and is used in detectors for infrared light, and niobium carbide, an extremely hard, refractory, ceramic material, commercially used in tool bits for cutting tools. The compounds niobium-germanium ( ) and niobium-tin ( ), as well as the niobium-titanium alloy, are used as a type II superconductor wire for superconducting magnets. Niobium sulfide as well as a few interstitial compounds of niobium with silicon are also known.


According to estimates, niobium is 33rd on the list of the most common elements in the Earth’s crust with 20 ppm. The abundance on Earth should be much greater, but the “missing” niobium may be located in the Earth’s core due to the metal's high density. The free element is not found in nature, but it does occur in minerals.Minerals that contain niobium often also contain tantalum, for example, columbite ((Fe,Mn)(Nb,Ta)2O6), columbite-tantalite (or coltan, (Fe,Mn)(Ta,Nb)2O6) and pyrochlore ((Na,Ca)2Nb2O6(OH,F)). Columbite-tantalite minerals are most usually found as accessory minerals in pegmatite intrusions, and in alkaline intrusive rocks. Less common are the niobates of calcium, uranium, thorium and the rare earth elements such as pyrochlore and euxenite ((Y,Ca,Ce,U,Th)(Nb,Ta,Ti)2O6). These large deposits of niobium have been found associated with carbonatites (carbonate-silicate igneous rocks) and as a constituent of pyrochlore.

The two largest deposits of pyrochlore were found in the 1950s in Brazil and Canada, and both countries are still the major producers of niobium mineral concentrates. The largest deposit is hosted within a carbonatite intrusion at Araxámarker, Minas Geraismarker Brazil, owned by CBMM ( ); the other deposit is located at Catalãomarker, Goiásmarker owned by Anglo American plc (through its subsidiary Mineração Catalão), also hosted within a carbonatite intrusion. Altogether these two Brazilian mines produce around 75% of world supply. The third largest producer of niobium is the carbonatite-hosted Niobec Mine, Saint-Honorémarker near Chicoutimimarker, Quebecmarker owned by Iamgold Corporation Ltd, which produces around 7% of world supply.

Extensive though unexploited resources are located in Nigeriamarker, Democratic Republic of Congomarker, Tanzania, Malawimarker, Australia and Russiamarker.


Niobium producers in 2007

After the separation from the other minerals, the mixed oxides of tantalum Ta2O5 and niobium Nb2O5 are obtained. The first step in the processing is the reaction of the oxides with hydrofluoric acid:

Ta2O5 + 14 HF → 2 H2[TaF7] + 5 H2O :Nb2O5 + 10 HF → 2 H2[NbOF5] + 3 H2O The first industrial scale separation, developed by [[Jean Charles Galissard de Marignac|de Marignac]], used the difference in solubility between the complex niobium and tantalum [[fluoride]]s, dipotassium oxypentafluoroniobate monohydrate (K2[NbOF5]·H2O) and dipotassium heptafluorotantalate (K2[TaF7]) in water. Newer processes use the liquid extraction of the fluorides from [[aqueous]] solution by [[organic solvents]] like [[cyclohexanone]]. The complex niobium and tantalum fluorides are extracted separately from the [[organic solvent]] with water and either precipitated by the addition of [[potassium fluoride]] to produce a potassium fluoride complex, or precipitated with [[ammonia]] as the pentoxide: :H2[NbOF5] + 2 KF → K2[NbOF5]↓ + 2 HF Followed by: :2 H2[NbOF5] + 10 NH4OH → Nb2O5↓ + 10 NH4F + 7 H2O Several methods are used for the [[Reduction (chemistry)|reduction]] to metallic niobium. The [[electrolysis]] of a molten mixture of K2[NbOF5] and [[sodium chloride]] is one; the other is the reduction of the fluoride with [[sodium]]. With this method niobium with a relatively high purity can be obtained. In large scale production the reduction of Nb2O5 with hydrogen or carbon is used. In the process involving the [[aluminothermic reaction]] a mixture of [[iron oxide]] and niobium oxide is reacted with [[aluminium]]: :3 Nb2O5 + Fe2O3 + 12 Al → 6 Nb + 2 Fe + 6 Al2O3 To enhance the reaction, small amounts of oxidizers like [[sodium nitrate]] are added. The result is [[aluminium oxide]] and [[ferroniobium]], an alloy of iron and niobium used in the steel production.{{cite journal|title = Progress in Niobium Markets and Technology 1981–2001|author = Tither, Geoffrey|url =|journal = Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA)|date = 2001|isbn = 9780971206809 |publisher = Niobium 2001 Ltd, 2002|editor=Minerals, Metals and Materials Society, Metals and Materials Society Minerals|year = 2001|format = pdf}}{{cite journal|title = The Production of Ferroniobium at the Niobec mine 1981–2001|first = Claude|last = Dufresne|coauthor = Goyette, Ghislain| url =|accessdate =|journal = Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA)|date = 2001|isbn = 9780971206809 |publisher = Niobium 2001 Ltd, 2002|editor=Minerals, Metals and Materials Society, Metals and Materials Society Minerals|year = 2001|format = pdf}} The ferroniobium contains between 60 and 70% of niobium. Without addition of iron oxide, aluminothermic process is used for the production of niobium. Further purification is necessary to reach the grade for [[superconductive]] alloys. [[Electron beam melting]] under vacuum is the method used by the two major distributors of niobium.{{cite journal|journal = The Iron and Steel Institute of Japan International|volume = 32|year = 1992|issue = 5|url =|accessdate =|title = Electron Beam Melting and Refining of Metals and Alloys|first = Alok|last = Choudhury|coauthors = Hengsberger, Eckart|pages = 673–681}} The [[United States Geological Survey]] estimates that the production increased from 38,700 metric tonnes in 2005 to 44,500 tonnes in 2006.{{cite web|url =|title = Niobium (Columbium)|first = John F |last=Papp|publisher = USGS 2006 Commodity Summary|accessdate = 2008-11-20}}{{cite web|url =|title =Niobium (Columbium)|first = John F |last=Papp|publisher = USGS 2007 Commodity Summary|accessdate = 2008-11-20}} The worldwide resources are estimated to be 4,400,000 tonnes. During the ten-year period between 1995 and 2005, the production more than doubled, starting from 17,800 tonnes in 1995.{{cite web|url =|title = Niobium (Columbium)|first = John F |last=Papp|publisher = USGS 1997 Commodity Summary|accessdate = 2008-11-20}} ==Applications== [[Image:Niobium metal.jpg|thumb|A niobium foil|alt=Three pieces of metallic foil with yellow taint]] It is estimated that out of 44,500 metric tons of niobium mined in 2006, 90% ended up in the production of high-grade structural steel, followed by its use in [[superalloys]].{{cite web|url =|title = Niobium (Columbium ) and Tantalum|first = John F |last=Papp|publisher = USGS 2006 Minerals Yearbook|accessdate = 2008-09-03}} The use of niobium alloys for superconductors and in electronic components account only for a small share of the production. ===Steel production=== Niobium is an effective [[Microalloyed steel|microalloying]] element for steel. Adding niobium to the steel causes the formation of [[niobium carbide]] and [[niobium nitride]] within the structure of the steel. These compounds improve the grain refining, retardation of recrystallization, and precipitation hardening of the steel. These effects in turn increase the toughness, strength, formability, and weldability of the microalloyed steel. Microalloyed [[stainless steel]]s have a niobium content of less than 0.1%.{{ cite journal|title = Niobium: Future Possibilities – Technology and the Market Place|first = Friedrich|last= Heisterkamp|coauthors = Tadeu Carneiro|url =|accessdate =|journal = Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA)|date = 2001|isbn = 9780971206809 |publisher = Niobium 2001 Ltd, 2002|editor=Minerals, Metals and Materials Society, Metals and Materials Society Minerals|year = 2001|format = pdf}} It is an important alloy addition to [[HSLA steel|high strength low alloy steels]] which are widely used as structural components in modern automobiles.{{cite journal|journal =Metallurgist|volume = 45|issue = 11–12|doi = 10.1023/A:1014897029026|pages = 477–480|year = 2001|title = Niobium for Steelmaking |first = Zh.|last = Patel|coauthors = Khul'ka K.| format = PDF|accessdate =}} These niobium containing alloys are strong and are often used in pipeline construction.{{cite journal|journal = Economic Bulletin|volume = 19|issue = 9|doi = 10.1007/BF02227064|pages = 8–11|year = 1982|title = Niobium: a steel additive with a future|first = Peter|last = Eggert|coauthors = Priem, Joachim; Wettig, Eberhard| format = PDF|accessdate =}}{{cite journal|url =|title = Development and Production of High Strength Pipeline Steels|first = Hans–Georg|last = Hillenbrand|coauthors = Gräf, Michael; Kalwa, Christoph| journal=Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001 (Orlando, Florida, USA) |publisher = Europipe|accessdate =|date = 2001-05-02}} ===Superalloys=== [[Image:Apollo CSM lunar orbit.jpg|thumb|Apollo CSM with the dark rocket nozzle made from niobium-titanium alloy |alt=Image of the Apollo Service Module with the moon in the background]] Appreciable amounts of the element, either in its pure form or in the form of high-purity ferroniobium and [[nickel]] niobium, are used in nickel-, [[cobalt]]-, and [[iron]]-base [[superalloys]] for such applications as [[jet engine]] components, [[gas turbines]], rocket subassemblies, and heat resisting and combustion equipment. Niobium precipitates a hardening γ''-phase within the grain structure of the superalloy. The alloys contain up to 6.5% niobium. One example of a nickel-based niobium-containing superalloy is Inconel 718, which consists of roughly 50% nickel, 18.6% chromium, 18.5% iron, 5% niobium, 3.1% molybdenum, 0.9% titanium, and 0.4% aluminium. These superalloys are used, for example, in advanced air frame systems such as those used in the Gemini program.

An alloy used for liquid rocket thruster nozzles, such as in the main engine of the Apollo Lunar Modules, is C103, which consists of 89% niobium, 10% hafnium and 1% titanium. Another niobium alloy was used for the nozzle of the Apollo Service Module. As niobium is oxidized at temperatures above 400 °C, a protective coating is necessary for these applications to prevent the alloy from becoming brittle.

Superconducting magnets

Niobium becomes a superconductor when lowered to cryogenic temperatures. At atmospheric pressure, it has the highest critical temperature of the elemental superconductors: 9.2 K. Niobium has the largest magnetic penetration depth of any element. In addition, it is one of the three elemental Type II superconductors, along with vanadium and technetium. Niobium-tin and niobium-titanium alloys are used as wires for superconducting magnets capable of producing exceedingly strong magnetic fields. These superconducting magnets are used in magnetic resonance imaging and nuclear magnetic resonance instruments as well as in particle accelerators. For example, the Large Hadron Collidermarker uses 600 metric tons of superconducting strands, while the International Thermonuclear Experimental Reactormarker is estimated to use 600 metric tonnes of Nb3Sn strands and 250 metric tonnes of NbTi strands. In 1992 alone, niobium-titanium wires were used to construct more than 1 billion US dollars worth of clinical magnetic resonance imaging systems.


A 150 Years Semmering Alpine Railway Coin made of niobium and silver
Niobium is used as a precious metal in commemorative coins, often with silver or gold. For example, Austriamarker produced a series of silver niobium euro coins starting in 2003; the colour in these coins is created by diffraction of light by a thin oxide layer produced by anodising. In 2008, six coins are available showing a broad variety of colours in the centre of the coin: blue, green, brown, purple, violet, or yellow. Two more examples are the 2004 Austrian €25 150 Years Semmering Alpine Railway commemorative coin, and the 2006 Austrian €25 European Satellite Navigation commemorative coin. Latvia produced a similar series of coins starting in 2004, with one following in 2007.

Other uses

Niobium and some niobium alloys are used in medical devices such as pacemakers, because they are physiologically inert (and thus hypoallergenic). Niobium treated with sodium hydroxide forms a porous layer that aids osseointegration. Along with titanium, tantalum, and aluminium, niobium can also be electrically heated and anodized, resulting in a wide array of colours using a process known as reactive metal anodizing which is useful in making jewelry. The fact that niobium is hypoallergenic also benefits its use in jewelry.

The arc-tube seals of high pressure sodium vapor lamps are made from niobium, or niobium with 1% of zirconium, because niobium has a very similar coefficient of thermal expansion to the sintered alumina arc tube ceramic, a translucent material which resists chemical attack or reduction by the hot liquid sodium and sodium vapour contained inside the operating lamp. The metal is also used in arc welding rods for some stabilized grades of stainless steel.

Niobium was evaluated as a cheaper alternative to tantalum in capacitor, but tantalum capacitors are still predominant. Niobium is added to glass in order to attain a higher refractive index, a property of use to the optical industry in making thinner corrective glasses. The metal has a low capture cross-section for thermal neutrons; thus it is used in the nuclear industries.

The Superconducting Radio Frequency (RF) cavities used in the free electron lasers TESLA and XFEL are made from pure niobium.

The high sensitivity of superconducting niobium nitride bolometers make them an ideal detector for electromagnetic radiation in the THz frequency band. These detectors were tested at the Heinrich Hertz Submillimeter Telescopemarker, the South Pole Telescopemarker, the Receiver Lab Telescope, and at APEXmarker and are now used in the HIFI instrument on board the Herschel Space Observatory.


Niobium has no known biological role. While niobium dust is an eye and skin irritant and a potential fire hazard, elemental niobium on a larger scale is physiologically inert (and thus hypoallergenic) and harmless. It is frequently used in jewelry and has been tested for use in some medical implants.

Niobium-containing compounds are rarely encountered by most people, but some are toxic and should be treated with care. The short and long term exposure to niobates and niobium chloride, two chemicals that are water soluble, have been tested in rats. Rats treated with a single injection of niobium pentachloride or niobates show a median lethal dose (LD50) between 10 and 100 mg/kg. For oral administration the toxicity is lower; a study with rats yielded a LD50 after seven days of 940 mg/kg.


External links

Embed code:

Got something to say? Make a comment.
Your name
Your email address