The Full Wiki

Pig iron: Map


Wikipedia article:

Map showing all locations mentioned on Wikipedia article:

Pig Iron of a type used to make ductile iron, stored in a bin

Pig iron is the intermediate product of smelting iron ore with coke, usually with limestone as a flux. Pig iron has a very high carbon content, typically 3.5–4.5%, which makes it very brittle and not useful directly as a material except for limited applications.

The traditional shape of the molds used for these ingots was a branching structure formed in sand, with many individual ingots at right angles to a central channel or runner. Such a configuration is similar in appearance to a litter of piglets suckling on a sow. When the metal had cooled and hardened, the smaller ingots (the pigs) were simply broken from the much thinner runner (the sow), hence the name pig iron. As pig iron is intended for remelting, the uneven size of the ingots and inclusion of small amounts of sand was insignificant compared to the ease of casting and of handling.


The Chinesemarker were making pig iron by the later Zhou Dynasty (1122–256 BC). In Europe, the process was not discovered until the late medieval period.


Traditionally pig iron would be worked into wrought iron in finery forges, and later puddling furnaces, more recently into steel. In these processes, pig iron is melted and a strong current of air is directed over it while it is being stirred or agitated. This causes the dissolved impurities (such as silicon) to be thoroughly oxidized. An intermediate product of puddling is known as refined pig iron, finers metal, or refined iron.

Pig iron can also be used to produce Gray iron. This is achieved by remelting pig iron, often along with substantial quantities of steel and scrap iron, removing undesirable contaminants, adding alloys, and adjusting the carbon content. Some pig iron grades are suitable for producing Ductile iron. These are high purity pig irons and depending on the grade of ductile iron being produced these pig irons may be low in the elements silicon, manganese, sulfur and phosphorous. These types of pig irons are useful to dilute all elements in a ductile iron charge (except Carbon) which may be harmful to the ductile iron process.

Modern uses

Today, pig iron is typically poured directly out of the bottom of the blast furnace through a trough into a ladle car for transfer to the steel plant in mostly liquid form, referred to as hot metal. The hot metal is then charged into a steelmaking vessel to produce steel, typically with an electric arc furnace or basic oxygen furnace, by burning off the excess carbon in a controlled fashion and adjusting the alloy composition. Earlier processes for this included the finery forge, the puddling furnace, the Bessemer process, and open hearth furnace.

Modern steel mills and direct-reduction iron plants transfer the molten iron to a ladle for immediate use in the steel making furnaces or cast it into pigs on a pig-casting machine for reuse or resale. Modern pig casting machines produce stick pigs, which break into smaller 4–10 kg pieces at discharge.

See also


  1. Wagner, Donald. Iron and Steel in Ancient China. Leiden 1996: E. J. Brill
  2. Several papers in The importance of ironmaking: technical innovation and social change: papers presented at the Norberg Conference, May 1995 ed. Gert Magnusson (Jernkontorets Berghistoriska Utskott H58, 1995), 143-179.
  3. R. F. Tylecote, A history of metallurgy (2nd edition, Institute of Materials, London, 1992).

Embed code:

Got something to say? Make a comment.
Your name
Your email address