The Full Wiki

More info on Smith & Wesson No. 3 Revolver

Smith & Wesson No. 3 Revolver: Map


Wikipedia article:

Map showing all locations mentioned on Wikipedia article:

The Smith & Wesson No. 3 Revolver (AKA the Smith & Wesson Russian Model and the Schofield Revolver ) was a single-action, cartridge-firing, top-break revolver produced by Smith & Wesson from 1870 to the late 1880s, and again recently as a reproduction by Smith & Wesson themselves, Armi San Marco, and Uberti.

It was produced in several variations and sub-variations, including both the aforementioned "Russian Model" (so named because it was supplied to military of Tsarist Russiamarker) and the "Schofield" model, named after Major George W. Schofield who made his own modifications to the Model No. 3 to meet his perceptions of the Cavalry's needs, which Smith & Wesson incorporated into an 1875 design they named after the Major, planning to obtain significant military contracts for the new revolver.

The S&W No. 3 was originally chambered for the .44 S&W American and .44 Russian cartridges, and typically did not have the cartridge information stamped on the gun (as is standard practice for most commercial firearms). No. 3 revolvers were also later produced in an assortment of calibres including .41 Henry Rimfire, .44-40, 32-44, 38-44, and .45 Schofield.

Russian Model

Smith & Wesson produced large numbers of the Model 3, in three distinct models, for Tsarist Russia by special order.The first was the 1st Model Russian (the original order design), and the Russian Ordnance Inspector mandated a number of improvements to the design, resulting in the 2nd Model Russian, with a final revision to the Russian design being known as the 3rd Model Russian.

Smith & Wesson nearly went bankrupt as a result of their Russian Contract production, as the Tsarist government assigned a number of engineers and gunsmiths to reverse-engineer the Smith & Wesson design, and then began to produce copies of the revolver- both in their own arsenal at Tulamarker and by contracting other manufacturers in Germany and elsewhere in the Europe to manufacture copies of the revolver (a common practice at the time- Webley & Scott's British Bulldog revolver was widely copied by European and American gunsmiths).

The Russian and European copies of the S&W No. 3 revolver were generally of very high quality, but considerably cheaper than the S&W produced revolvers. This led to the Tsarist government cancelling the order for significant quantities of Smith & Wesson-made revolvers (which Smith & Wesson had already produced), and delaying (or refusing) payment for the handguns that had already been delivered.

Schofield Revolver

Smith & Wesson Model No.
3 Schofield Revolver

The US Army adopted the .44 S&W American calibre Smith & Wesson No. 3 revolver 1870, making the No. 3 revolver the first standard-issue cartridge-firing revolvers in US service. Most military pistols up until that point were black powder cap and ball revolvers, which were (by comparison) slow, complicated, and susceptible to the effects of wet weather.

In 1875 the US Ordnance Board granted Smith & Wesson a contract to outfit the military with No. 3 pistols incorporating the design improvements of Major George W. Schofield (known as the "Schofield revolver"), providing they could make the revolvers work with the .45 Colt (AKA ".45 Long Colt") ammunition already in use by the US military. Smith & Wesson instead developed their own, slightly shorter .45 caliber round, the .45 Schofield, otherwise known as the .45 S&W.When it became obvious in the field that the two cartridges would not work interchangeably in the Schofield (although they both worked in the Colt), the U.S. Government adopted the shorter .45 Schofield cartridge as the standard cartridge. Despite the change, old stocks of the longer .45 Colt rounds in the supply line caused the Army to drop most of the Schofields and continue with the Colt. Major Schofield had patented his locking system and earned a payment on each gun that Smith and Wesson sold, and at the time his older brother, John M. Schofield, was the head of the Army Ordnance Board and the political situation may have been the main issue for the early end of army sales.

Many of the S&W No. 3 Schofield revolvers saw service in the Indian Wars, and there are reports of them in use as late as the Spanish-American War and Philippine-American War. Like the other Smith and Wesson Model 3’s, they were also reportedly popular with lawmen and outlaws in the American West, and were reportedly used by Jesse James, John Wesley Hardin, Pat Garrett, Theodore Roosevelt, Virgil Earp, Billy the Kid, and many others. While the standard barrel length was 7", many Schofields were purchased as surplus by distributors, had the barrels shortened to 5", and were refinished in nickel.

After the Spanish American War in 1898, the US Army sold off all their surplus Schofield revolvers. The surplus Schofield revolvers were reconditioned by wholesalers and gunsmiths (at professional factory-quality level) with a considerable number offered for sale on the commercial market with a 5 inch barrel as well as the standard size barrel of 7 inches.

Of the most notable purchasers of these reconditioned Schofield revolvers was Wells Fargo and Company, who purchased the revolvers for use by Wells Fargo Road Agents and had the barrels shortened to a more concealable 5 inch length. These revolvers were then inspected by Wells Fargo armorer and uniquely stamped "W.F. & Co" or "Wells Fargo & Co", along with the original Smith & Wesson serial number re-stamped alongside the Wells Fargo stamping on the flat part of the barrel just forward of the barrel pivot as well as re-stamping any part of each revolver which had not originally been stamped or stamped in a location that would be difficult to view the serial number, when needed.

The Wells Fargo Schofield revolvers became so popular with collectors from the 1970s onwards that the unique Wells Fargo markings were being "counterfeited" or "faked" by unscrupulous sellers to enhance the value of other similar versions that had not been genuinely owned by Wells Fargo & Co. It should be noted that there are more "fake" Wells Fargo marked Schofield revolvers than genuine Wells Fargo marked Schofield revolvers in existence and, accordingly, a collector interested in purchasing a "Wells Fargo" Schofield revolver would be well advised to have a pre-purchase inspection and verification performed by a notable antique firearms expert, specializing in this specific model, before purchasing the revolver.

The Schofield was produced in two versions, the First Model Schofield and the Second Model Schofield. The First Model Schofield has a latch configuration that is rather pointed at the top and has a circle around the screw head at the bottom, whereas the Second Model latch has a large raised circle at the top of the latch. One of General Schofield's revisions and improvements to the predecessor Model 3 Revolvers included mounting the spring loaded barrel catch on the frame as opposed to the standard Smith and Wesson Model 3 has the latch mounted on the barrel rather than the frame. In the previous engineering the posts of the frame would wear out after heavy usage. Schofield's improvement called for heat treated, replaceable components at this sensitive "wear" area of the catch and latch. Serial number range also will give an indication of whether it is First or Second Model, with the s/n’s changing from the First Model to the Second Model at a little over 3,000.

In 1877, S&W discontinued production of its other Model 3's such as the American, Russian, and Schofield – in favor a new improved design called the New Model Number Three. Standard chambering was .44 Russian, although other calibers were offered on special order or in related models such as the .44-40 Frontier Model, the .32-44 & .38-44 Target Models, and the very rare .38 Winchester Model.

Modern Reproductions

Modern reproductions of the Smith & Wesson No. 3 Revolver are made by a number of companies, including (most notably) Smith & Wesson themselves, as well as the Italian arms-makers Uberti and Armi San Marco.

Smith and Wesson

Smith & Wesson manufacture a modern reproduction of the original No. 3 Revolvers. Re-introduced at the 2000 SHOT Show, and touted as being a "true" reproduction, side-by-side comparison of an original with the pre-production gun showed that the new version is slightly beefier than the original around the barrel and topstrap, though not as much as on the Navy Arms guns. Changes in the internal lock mechanism were also made. It appears from the photos that the firing pin in the S&W Model is frame-mounted instead of being an integral part of the hammer.

Uberti/Armi San Marco

Uberti version, imported by Navy Arms, had external dimensions generally similar to the original 2nd Model Schofield, but the barrel and topstrap are considerably thicker, for additional strength. As with the Armi San Marco model, the Navy Arms/Uberti No. 3 revolver has a lengthened cylinder to accommodate .45 Long Colt and .44-40 cartridges. Although there were some problems with the locking latch angles in early guns, these were generally corrected or the guns replaced. European reproduction No. 3 revolvers have changes made to their lockwork to meet import regulations.



Embed code:

Got something to say? Make a comment.
Your name
Your email address