
Backyard swimming pool.
A
swimming pool,
swimming bath,
wading pool, or simply a
pool, is
an artificially enclosed
body of water
intended for
swimming or water-based
recreation. There are many standard
sizes; the largest and deepest is the Olympic size. A pool can be
built either above or in the ground, and from materials such as
metal,
plastic,
fiberglass or
concrete.
Pools that may be used by many people or by the general public are
called public, while pools used exclusively by a few people or in a
home are called private. Many
health
clubs, fitness centers and private clubs have public pools used
mostly for exercise. Many
hotels and
massage parlors have public pools for
relaxation.
Hot tubs and
spas are pools with hot water, used for relaxation or
therapy, and are common in homes, hotels, clubs and massage
parlors. Swimming pools are also used for
diving, other sports, and training of
lifeguards and
astronauts.
Pools must be sanitized to prevent growth and spread of
bacteria,
viruses,
algae and
insect larvae that can cause
disease.
This is done by chemical disinfectants such as chlorine, bromine or
mineral sanitizers, and additional filters. Alternatively, pools
can be made without chemical disinfectants by using a biofilter
with additional filters. In both cases, pools need to be fitted
with an adequate flow rate.
History
The "great
bath" at the site of Mohenjo-Daro
was most likely dug during the 3rd millennium
BC. This pool is 12 by 7 meters, is lined with bricks and
was covered with a tar-based sealant.
Ancient Greeks and
Romans built artificial pools for athletic
training in the
palaestras, for nautical
games and for military exercises. Roman emperors had private
swimming pools in which fish were also kept, hence one of the
Latin words for a pool,
piscina. The
first heated swimming pool was built by
Gaius Maecenas of Rome in the first century
BC. Gaius Maecenas was a rich Roman lord and considered one of the
first patrons of arts.
Ancient
Sinhalese built pairs of pools
called "Kuttam Pokuna" in the kingdom
of Anuradhapura
, Sri
Lanka
in the 4th century BC. They were decorated
with flights of steps, punkalas or pots of abundance and scroll
design.
Swimming pools became popular in Britain in the mid 19th century.
By 1837,
six indoor pools with diving boards were built in London
, England
.
After the modern
Olympic Games began
in 1896 and included swimming races, the popularity of swimming
pools began to spread (reference: Encyclopedia Britannica).
In 1839,
Oxford
had its first major public indoor pool at Temple
Cowley, and swimming began to take off. The Amateur Swimming
Association was founded in 1869 in England, and the Oxford Swimming
Club in 1909 with its home at Temple Cowley Pool.
The presence of indoor
baths in the cobbled area of Merton Street
, London may have persuaded the less hardy of the
aquatic brigade to join. So, bathers gradually became
swimmers, and bathing pools swimming pools.
In the
USA, the Racquet Club of Philadelphia
clubhouse (1907) boasts one of the world's first
modern above-ground swimming pools. The first swimming pool
to go to sea on an ocean liner was installed on the
White Star Line's
Adriatic in 1907.
After
World War I and the departure of
"
long John" style swimming costumes,
interest in competitive swimming grew. Standards improved and
training became essential.
Home
swimming pools became popular in the USA after World War II and the publicity given to
swimming sports by Hollywood
films like Esther
Williams Million Dollar Mermaid made a home pool a
desirable status symbol. More than 50 years later, the home
or residential swimming pool is ubiquitous and even small nations
enjoy a thriving swimming pool industry (e.g. New Zealand pop.
4,116,900 [Source NZ Census 7 March 2006] - holds the record in
pools per capita with 65,000 home swimming pools and 125,000 spa
pools).
Swimming pool records
Open air swimming pool 'Moscow' (1980).
One of the
largest swimming pools ever built was reputedly in Moscow
after the
Palace of
Soviets
remained uncompleted. The foundations were
converted into the
Moskva Pool open air
swimming pool after the process of
de-Stalinisation.
After the fall of
communism, Christ the
Saviour Cathedral
was re-built (it had originally been on the site)
between 1995 and 2000.
According
to the Guinness World
Records, the largest swimming pool in the world is San Alfonso del Mar Seawater pool in
Algarrobo, Chile
. It
is long and has an area of 8 ha (20 acres). It was completed in
December 2006.
The
largest indoor wave pool in North America is at the West
Edmonton Mall
and the largest indoor pool is at the Neutral
Buoyancy Lab
in the Sonny Carter Training
Facility
at NASA
JSC in Houston.The recreational diving center Nemo 33
near Brussels
, Belgium
is home to the world's deepest swimming
pool. The pool has two large flat-bottomed areas at depth
levels of and , and a large circular pit descending to a depth of
.
The
Fleishhacker
Pool
in San
Francisco
, California
was the largest swimming pool in the United
States. Opened on 23 April 1925, it measured and was so
large that the lifeguards required
kayaks for
patrol. It was closed in 1971 due to low patronage.
Dimensions

A boy in a shallow children's
pool.
- Length:
Most
pools in the world are measured in metres, but in the United States
pools are almost always measured in feet and yards.
In the
United
Kingdom
most pools are in metres, but older pools measured
in yards still exist. In the US pools tend to either be 25
yards (
SCY-
short
course yards), 25 metres (
SCM-short course
metres) or 50 metres (
long course). US
high schools and the
NCAA conduct short course
(25 yards) competition. There also exist many pools 33⅓ m
long, so that 3 lengths = 100 m. This pool dimension is
commonly used to accommodate
water
polo.
USA Swimming (USA-S) swims in both
metric and non-metric pools. However, the international standard is
metres, and world records are only recognized when swum in
50 m pools (or 25 m for short course). In general, the shorter
the pool, the faster the time for the same distance, since the
swimmer gains speed from pushing off the wall after each turn at
the end of the pool.
- Width:
Most European pools are between 10 m and 50 m wide.
- Depth:
The depth of a swimming pool depends on the purpose of the pool,
and whether it is open to the public or strictly for private use.
If it is a private casual, relaxing pool, it may go from deep. If
it is a public pool designed for diving, it may slope from in the
deep end. A children's play pool may be from deep. Most public
pools have differing depths to accommodate different swimmer
requirements. In many jurisdictions, it is a requirement to show
the water depth with clearly marked depths affixed to the pool
walls.
Types

A private swimming pool.
Private pools
Private pools are usually smaller than public pools, on average to
whereas public pools usually start at . Home pools can be
permanently built-in, or be assembled above ground and disassembled
after summer. Privately owned outdoor pools in backyards or gardens
started to proliferate in the 1950s in regions with warm summer
climates, particularly in the United States.
In some warm-weather
US locations, such as Florida
, California
, and Arizona
, home pools are so common that it is rare to find a
new house being built without a pool being considered in the
design.
Private pools are increasingly a feature of homes in greater
latitudes.
For example, in London
many larger
homes are now refurbished with indoor pools, usually in the
basement or in a conservatory.
In some
European cities, including Munich
, it is
relatively common for people living in older properties to convert
existing internal motorcar garage
into indoor pool areas.
Construction
methods for private pools vary greatly. The main types of
in-ground pools are
concrete,
vinyl liner, and
fiberglass.
Above-ground pools (also called "on-ground pools") are usually
cheaper to build. They are especially popular in places where
ground freezing makes excavation difficult and threatens damage to
the pool structure.

A small inflatable "splasher"
pool.
Inexpensive temporary
PVC pools can be bought in
supermarkets and taken down after
summer. They are used mostly outdoors in yards, are typically
shallow, and often their sides are inflated with air to stay rigid.
When finished, the water and air can be let out and this type of
pool can be folded up for convenient storage. They are regarded in
the swimming pool industry as "splasher" pools intended for cooling
off and amusing toddlers and children, not for swimming.
Some people use
hot tubs and
spas at home to soak their bodies in water for
recreation and therapeutic reasons.
Many
toys are available for children and other
people to play with in pool water. They are often blown up with air
so they are soft but still reasonably rugged, and can float in
water.
Many countries now have strict
pool
fencing laws for private swimming pools, which require pool
areas to be isolated so that unauthorized children younger than six
years cannot enter. Many countries require a similar level of
protection for the children residing in or visiting the house,
although many pool owners prefer the visual aspect of the pool in
close proximity to their living areas, and will not provide this
level of protection. There is no general consensus between states
or countries on the requirements to fence private swimming pools,
and in many places they are not required at all, particularly in
rural settings.
Public pools
Public pools are often found as part of a larger leisure centre or
recreational complex. These centres often have more than one pool,
such as an indoor heated pool, an outdoor
saltwater or unheated
chlorinated pool, a shallower children's pool,
and a paddling pool for
toddlers and
infants. There may also be a
sauna and one or more
hot tubs
or
spa pools ("
jacuzzis").
Public pools may belong to a
hotel or
holiday resort, as an amenity for the
recreation of their guests. If a pool is in a separate building,
the building is called a "natatorium". The building sometimes also
has facilities for related activities, such as a diving tank.
Outdoor pools are common in warmer climates. Larger pools sometimes
have a
diving board affixed at one edge
above the water. Diving pools should be deep enough that divers are
not injured.
Many public swimming pools are
rectangles
25 m or 50 m long, but may be any size and shape desired.
There are also elaborate pools with artificial
waterfalls,
fountains,
splash pads, wave machines, varying
depths of water,
bridges, and island
bars.
There are often
lockers for clothing
and other belongings. The lockers often require a coin to be
inserted as deposit or payment. There are often showers ready for
use - sometimes mandatory - before and/or after swimming.
Wading pools are shallow bodies of water intended for use by small
children, usually in
parks. Concrete wading
pools come in many shapes, traditionally
rectangle,
square
or
circle. They are filled and drained daily
due to lack of a filter system. Staff chlorinate the water to
ensure health and safety standards.
Competition pools
Federation
Internationale de la Natation (FINA, International Swimming
Federation) sets widely recognized standards for competition pools:
long and at least deep. Competition pools are generally indoors and
heated to enable their use all year round, and to more easily
comply with the regulations regarding temperature, lighting, and
automatic officiating equipment.
An
Olympic sized swimming
pool (first used at the
1924
Olympics) is a pool that meets FINA's additional standards for
the Olympic Games and for world championship events. It must be in
length by wide, divided into eight lanes of each plus two areas of
at each side of the pool. The water must be kept at and the
lighting level at greater than 1500
lux. Depth
must be at least , and there are also regulations for color of lane
rope, positioning of
backstroke
flags (5 meters from each wall), and so on. Pools claimed to be
"Olympic pools" do not always meet these regulations, as FINA
cannot police use of the term.
Touchpads are mounted on both walls
for long course meets and each end for short course.
A pool may be referred to as fast or slow, depending on its
physical layout.Some design considerations allow the reduction of
swimming
resistance making the pool
faster: namely, proper pool depth, elimination of currents,
increased lane width, energy absorbing racing lane lines and
gutters, and the use of other innovative hydraulic, acoustic and
illumination designs.
Exercise pools
In the last two decades, a new style of pool has gained popularity.
These consist of a small vessel (usually about 2.5 m x 5 m) in
which the swimmer swims in place, either against the push of an
artificially generated water current or against the pull of
restraining devices. These pools have several names, such as
swim spas, swimming
machines, or
swim systems. They are all examples
of different modes of
resistance
swimming.
Hot tubs and spa pools
Hot tubs and
spa pools
are common heated pools used for relaxation and sometimes for
therapy. Commercial spas are common in the swimming pool area or
sauna area of a
health
club or fitness centre, in men's clubs, women's clubs,
motels and exclusive
five
star hotel suites. Spa clubs may have very large pools, some
segmented into increasing temperatures.
In Japan
, men's clubs
with many spas of different size and temperature are common.
Commercial spas are generally made of
concrete, with a
mosaic
tiled interior. Hot tubs are typically made
somewhat like a
wine barrel with
straight sides, from wood such as
Californian redwood held in place by
metal hoops. Immersion of the head is not recommended in spas or
hot tubs due to a potential risk of underwater entrapment from the
pump suction forces. However, commercial installations in many
countries must comply with various safety standards which reduce
this risk considerably.
Home spas are a worldwide retail item in western countries since
the 1980s, and are sold in dedicated spa stores, pool shops,
department stores, the
Internet, and
catalog sales
books. They are almost always made from heat-extruded
acrylic sheet
Perspex, often colored in
marble look-alike patterns. They rarely exceed and
are typically deep, restricted by the availability of the raw sheet
sizes (typically manufactured in Japan). There is often a mid-depth
seating or lounging system, and contoured lounger style reclining
seats are common. Upmarket spas include various jet nozzles
(massage, pulsating etc.), a drinks tray, lights,
LCD flat-screen
TV sets and other
features that make the pool a recreation center. Due to their
family-oriented nature, home spas are normally operated from . Many
pools are incorporated in a
redwood or
simulated wood surround, and are termed "portable" as they may be
placed on a
patio rather than sunken into a
permanent location. Some portable spas are shallow and narrow
enough to fit sideways through a standard door and be used inside a
room. Low power electric immersion heaters are common with home
spas.
Whirlpool tubs first became popular in America during the 1960s and
70's. A spa is also called a "jacuzzi" in USA since the word became
a generic after plumbing component manufacturer
Jacuzzi introduced the "Spa Whirlpool" in 1968. Air
bubbles may be introduced into the
nozzles
via an air-bleed
venturi pump that
combines cooler air with the incoming heated water to cool the pool
if the temperature rises uncomfortably high. Some spas have a
constant stream of bubbles fed via the seating area of the pool, or
a footwell area. This is more common as a temperature control
device where the heated water comes from a natural (uncontrolled
heat)
geothermal source, rather than
artificially heated. Water temperature is usually very warm to hot
— , so bathers usually stay in for only 20 to 30 minutes.
Bromine or
mineral
sanitizers are often recommended as sanitizers for spas because
chlorine dissipates at a high temperature
thereby heightening its strong chemical smell.
Ozone is an effective bactericide and is commonly
included in the circulation system with cartridge filtration, but
not with sand media filtration due to clogging problems with turbid
body fats.
Ocean pools
In the early 20th century, especially in
Australia,
ocean pools, were built typically
on headlands by enclosing part of the rock shelf, with water
circulated through the pools by flooding from tidal tanks or by
regular flooding over the side of the pools at high tide. There
were often separate pools for women and men, or the pool was open
to the sexes at different times with a break for bathers to come
without fear of observation by the other sex. Segregated changing
sheds and showers were provided.These were the fore-runners of
modern 'Olympic' pools. A variation was the later development of
sea- or harbour-side pools that circulated sea water using pumps. A
pool of this type was the training ground for Australian Olympian
Dawn Fraser.
Infinity pools
An
infinity pool (also named
negative edge or
vanishing edge pool) is a
swimming pool which produces a visual effect of water extending to
the horizon, vanishing, or extending to "infinity". Often, the
water appears to fall into an ocean, lake, bay, or other similar
body of water. The illusion is most effective whenever there is a
significant change in elevation. Having a natural body of water on
the horizon is not a limiting factor, as many strikingly beautiful
vanishing edge pools have been built with forests or vegetation in
the background.
Natural swimming pools and swimming ponds

This German swimming pond highlights
how NSPs can be designed to resemble a part of the surrounding
environs.
Natural Swimming Pools were
developed in central and western Europe in the early and mid 1980's
by designers and landscape architects with environmental concerns.
They have recently been growing in popularity as an alternative to
traditional swimming pools. Natural swimming pools (NSPs) are
constructed bodies of water in which no chemicals or devices that
disinfect or sterilize water are used, and all clarifying and
cleaning of the water is achieved purely with the motion of the
water through biological filters and plants rooted hydroponically
in the system. In essence, NSPs are built mindful of the principles
behind natural swimming holes and swimmable lakes; years ago,
people felt safe swimming in non-polluted, healthy, and
ecologically-balanced bodies of water, and NSPs seek to recreate
that environment.
The water in NSPs, being 100% chemical free, has many desirable
characteristics. For example, the red eyes, dried-out skin and
hair, and bleached bathing suits associated with overly chlorinated
water is naturally absent with NSPs. NSPs, by requiring a water
garden to be a part of the system, offer different aesthetic
options and can also support amphibious wildlife like snails,
frogs, and salamanders, which many NSP owners appreciate as a sign
of a healthy and safe body of water.
Zero-entry swimming pools
A
zero-entry swimming pool, also called a
beach entry
swimming pool, is a swimming pool having an edge or entry that
gradually slopes from the deck into the water, becoming deeper with
each step, in the manner of a natural beach. As there are no stairs
or ladders to navigate, this type of entry assists older people,
young children and people with
accessibility problems where gradual entry is
useful.
Other uses
An astronaut prepares to descend into a swimming pool.
Swimming pools are also used for events such as
underwater hockey,
synchronized swimming,
water polo and
canoe
polo as well as for teaching
diving and
lifesaving techniques. They have also
been used for specialist tasks such as teaching water-
ditching survival techniques for aircraft and
submarine crews and
astronaut training.
Round-cornered, irregular swimming pools, drained of water, were
the first surfaces used for vertical
skateboarding.
Sanitation
Swimming pool water must contain low levels of
bacteria and
viruses to
prevent the spread of
diseases and
pathogens between users. Bacteria,
algae and
insect larvae can also enter the pool without help from
swimmers, and cause disease to swimmers and other people in the
area.
The
subprime mortgage crisis in
the United
States
caused many people to leave their homes without
emptying their swimming pools. This resulted in the pools
turning green with algae and becoming mosquito breeding grounds in
less than a week.
Pumps and mechanical filters are often used to filter such
pathogens out of the water. Chemical
disinfectants, such as
hypochlorous acid,
sodium hypochlorite (household bleach),
bromine,
salt or
mineral sanitizers, are used to
make the water inhospitable to pathogens. These substances also
turn the water into a faded blue/green color. Chemical disinfection
produces
disinfection
byproducts called
trihalomethanes.
Chemical free,
electronic
oxidation water sanitation offers an alternative to chlorine,
salt chlorination and ozone, though it typically relies upon metals
which can be toxic to aquatic life in minute quantities.
Oxygen pools are produced via the electronic
oxidation of the water molecule itself to generate the natural
oxidisers hydroxyl
(OH), atomic oxygen (O1), hydrogen peroxide (H2O2) and molecular
oxygen (O2). All of these have a higher
oxidation reduction potential
(
ORP) value than chlorine. Electronic oxidation
generate more oxidisers in under 1 minute than salt, chlorine,
ozone or UV can generate in an hour. Electronic oxidation combined
with low levels of
copper
ionization (0.5PPM) provides a very effective pool sanitation
that is 100% chlorine free, but not environmentally advantageous,
as the metals are far more persistent than chlorine and are toxic
to aquatic life in the parts per billion range.
Winterization
In areas which reach freezing temperature, it is important to close
a pool properly. This varies greatly between inground and
aboveground pools. By taking steps to properly secure the pool, it
lessens the likelihood that the superstructure will be damaged or
compromised by freezing water.
Closing vinyl and fibreglass pools

A rolled up Thermal Bubble pool cover,
used to reduce water loss from evaporation and heat loss from the
pool.
In preparation for freezing temperatures, an in-ground swimming
pool's pipes must be emptied. An above-ground pool should also be
closed, so that ice does not drag down the pool wall, collapsing
its structure. The plumbing is sealed with air, typically with
rubber plugs, to prevent cracking from freezing water. The pool is
typically covered to prevent leaves and other debris from falling
in. The cover is attached to the pool typically using a stretch
cord, similar to a
bungee cord and hooks
fitted into the pool surround. The skimmer is closed off or a
floating device is placed into it to prevent it from completely
freezing and cracking. Floating objects such as life rings or
basketballs can be placed in the pool to
avoid its freezing under the cover. Drain plugs on the
pool filter are removed after the filter has
been cleaned. The pool
pump motor is taken
under cover. Winter chemicals are added to keep the pool
clean.
In climates where there is no risk of freezing, closing down the
pool for winter is not so important. Typically, the thermal cover
is removed and stored. Winter sunlight can create an
algae mess when a cover that has been left on all
winter is removed. The pool is correctly
pH-balanced and super-chlorinated. One litre algaecide
for every 50,000 litres of pool water should be added, and topped
up each month. The pool should be filtered for one to two hours
daily to keep the automated chlorination system active.
Covers
Swimming pool heating costs can be significantly reduced by using a
pool cover. Use of a pool cover also can help reduce the amount of
chemicals (chlorine, etc) required by the pool. Outdoor pools gain
heat from the sun, absorbing 75%–85% of the solar energy striking
the pool surface. Though a cover decreases the total amount of
solar heat absorbed by the pool, the cover eliminates heat loss due
to evaporation and reduces heat loss at night through its
insulating properties. Most swimming pool heat loss is through
evaporation.
The heating effectiveness of a cover depends on type. A transparent
bubble cover is the most effective, as it allows the largest amount
of solar flux into the pool itself. Thermal bubble covers are
lightweight
UV stabilized floating covers
designed to minimize heat loss on heated swimming pools. Typically
they are only fitted in spring and fall (autumn) when the
temperature difference between pool water and air temperature is
greatest. They raise temperature of a pool by around 20
°Fahrenheit, or 11 °Celsius, after being on the pool for a week.
Bubble covers are typically applied and removed by being rolled up
on a device fitted to one side of the pool (see illustration).
Covers fall apart after 4 or 5 years due to sun exposure,
overheating in the sun while off the pool, and chlorine attacking
the plastic. Bubble covers should be removed during super
chlorination.
A vinyl cover absorbs more sunlight directly, allowing temperature
to rise faster, but ultimately prevents the pool from reaching as
high a temperature as a clear cover. Vinyl covers consist of a
heavier material and have a longer life expectancy than bubble
covers. Insulated vinyl covers are also available with a thin layer
of flexible insulation sandwiched between two layers of
vinyl.
These covers are mandatory to be fitted to all pools in areas of
Australia that have experienced drought
since 2006. This is an effort to conserve water, as much water
evaporates and transpires.
- Safety covers:
These covers are typically attached all winter, by hooked bungee
cords or hooked springs connected to the pool deck, and are usually
made in a variety of materials including coated or laminated vinyl
or polypropylene mesh. They are custom designed to stop leaf debris
from entering the pool but more importantly they also provide
safety for animals and small children when designed and installed
properly. The custom safety cover was invented in 1957 by Fred
Meyer Jr. of Meyco Pool Covers when he found a dead animal in his
pool. Today covers are made to meet ASTM safety barrier standards
and have kept animals, people and even large vehicles out of the
pool. They are not popular in warmer climates, due to the five to
ten minutes it takes to fit/remove them, making them inconvenient
for repeated application and removal.
Pool cover automation

Automatic Pool Cover.
A pool cover can be either manually, semi-automatically, or
automatically operated. Manual covers can be folded and stored in a
convenient location. Pool cover reels can also be used to help
manually roll up the pool cover. The reel, usually on wheels, can
be rolled in or out of place.
Semi-automatic covers use a motor-driven reel system. They use
electrical power to roll and unroll the cover, but usually require
someone to pull on the cover when unrolling, or guide the cover
onto the reel when rolling up the cover. Semi-automatic covers can
be built into the pool deck surrounding the pool, or can use reels
on carts.
Automatic covers have permanently mounted reels that automatically
cover and uncover the pool at the push of a button. They are the
most expensive option, but are also the most convenient.
Some pool covers fit into tracks along the sides of the pool. This
prevents anything or anybody from getting into the pool. They even
support the weight of several people. They can be run manually,
semi-automatically, or automatically. Safety covers may be required
by inspectors for public pools.
Safety
Pools present a significant risk of infant and toddler death due to
drowning. In regions where residential
pools are common, drowning is a major cause of childhood
fatalities. Therefore it is advisable to closely watch small
children around swimming pools, especially private pools that do
not have professional
lifeguards. Adults
are more likely to be aware of risks, but it is still a good idea
to have more than one person around when using a private pool. As a
precaution, many municipalities have by-laws that require that
residential pools be enclosed with fencing to restrict unauthorized
access.
In public pools there is a lower risk of accident, with trained
lifeguards on duty whenever the pool is open. Because of the risk
of drowning and the desire for greater safety, and technological
advances that make such safety possible, more and more public pools
are equipped with computer-aided
drowning prevention or other forms of
electronic and sometimes automated safety and security systems.
Among these are the Poseidon system,
Swimguard, and the Drowning Early Warning System
(DEWS).
The best way to ensure safety around pools is to be educated.
Knowing how a swimming pool works greatly improves safety. Long
haired individuals must avoid water inlets. These inlets, also
known as skimmers, are rectangular holes on the wall that are
sometimes partly or completely underwater. In private pools there
can be one to two inlets, in public pools five to twenty. Also to
be avoided are the main drains, usually identified as round mesh
covered objects on the pool floor, as poor design can occasionally
cause a safety problem. Building codes and product standards have
eliminated these hazards for current designs, but not all pools are
up to standard. One significant law to increase safety of pools is
the
Virginia Graeme
Baker Pool And Spa Safety Act which regulates pools to reduce
the risk of entrapment.
Also the bigger the body of water, the greater force it needs to
have the water circulating. Stronger water pumps are used on large
pools to keep them healthy, so extra care must be taken when
swimming along the sides or floor of the pool, where drains are
present. Some pools are designed without drains, which will 100%
eliminate the potential of suction entrapment.
People with recent
piercings are advised
to keep those from being submerged in pools, to avoid them being
infected.
Suspended ceilings in indoor swimming pools are safety-relevant
components.
As was demonstrated by the collapses of the
ceiling of the Uster
(Switzerland
) indoor swimming pool (1985) and again at Steenwijk
(Netherlands
, 2001), attention must be paid to selecting
suitable materials and inspecting the state of such
components. The reason for the failures was
stress corrosion cracking of metal
fastening components made of
stainless
steel.
There is also the problem with chemical exposure from chlorinated
swimming pools. Numerous scientific studies have shown increased
instances of Asthma of those who swim regularly or those who work
in and around indoor swimming pools. Another study with children
found that kids who swam in indoor swimming pools for 1.8 hours or
more a week had lung conditions similar to those of a heavy smoker.
Also chlorine exposure from swimming pools has been shown to
increase the risk of bladder and kidney cancer by more than 56% and
it was also noted in the 2000 Olympics in Sydney Australia, where
25% of the U.S. Olympic swim team suffered from some level of
Asthma.
Dress code
In public swimming pools
dress code may
be stricter than on public
beaches, and in
indoor pools stricter than outdoor pools. For example, in countries
where women can be
topless on the beach,
this is often not allowed in a swimming pool, and a
swimsuit must be worn. For men, wearing shoes, and
a shirt, on a beach is acceptable, but often not in a pool.
Indoor pools have stricter dress codes than outdoor pools: in
outdoor pools, men are often allowed to wear t-shirts for modesty
or for protection from sunburn, but in indoor pools they must
usually go shirtless. At beaches, many people swim with clothes on
and wear
beachwear, but at pools
(especially indoor pools) more minimal attire is often worn, such
as
lycra briefs for men or lycra one-piece
tanksuits for women. Swimming with clothes
on often results in objections from lifeguards at pools, especially
indoor pools. In France and other European countries,
board shorts are usually not allowed for
hygiene reasons.
In Scandinavian
countries and in particular Iceland
, rules about clothing and hygiene are especially
strict. Bathing suits are sometimes doubled up (wearing one
brief inside another) when diving from a high board, so that the
swimsuit does not rip on impact with the water.
See also
References
- Great Bath, Mohenjo-daro
- Gaius Maecenas, or Gaius Cilnius Maecenas (Roman diplomat
and patron) - Britannica Online Encyclopedia
- WWW Virtual Library: ANURADHAPURA
- Lidos: Links and References
- British Swimming & Amateur Swimming
Association: History of the ASA
- History
- TGOL - Adriatic
- DESTRUCTION (1931-1990)
- Edmonton.com: Travel, Tourism & Leisure
accessed 15 April 2007
- NASA, Behind the Scenes: Training, accessed 7 May
2007
- BBC, World's deepest pool set to open accessed
15 April 2007
- " Zesiger pool design", Zesiger sports and fitness
center, MIT, accessed
2007-02-04
- " Stories from the Yamba ocean pool", Australian Broadcasting
Corporation, [] accessed 2006-12-28
- West Nile quiet so far this year - The Californian
/ North County Times
- The theory of colors of water in the swimming
pool by Sahatchai Wanawongsawad
- ECOTOX
Database
- Department of Energy: Conserving Energy and Heating your
Swimming Pool with Solar Energy (PDF)
- M. Faller and P. Richner: Material selection of
safety-relevant components in indoor swimming pools, Materials
and Corrosion 54 (2003) S. 331 - 338.( only online in German (3.6 MB)) ( ask for a copy of the English version)
- Chlorinated Swimming Pools Can Cause Asthma in
Swimmers
- Visit Reykjavík - The official tourist website of
Reykjavik, accessed 14 March 2007
External links